What to do if Windows won't install. Windows xp won't install: what to do? Making installation media using Ultra ISO

Reading time: 37 min

With installation Windows users encounter more often than we would like. Thus, the fact remains unchanged that various types of errors may occur, after which Windows 7 will not install.

We will not consider special cases of malfunctions, but rather their main types and methods of elimination. To structure the search, problems need to be broken down possible reasons into main categories, by going through them one by one you will find your problem.

So, why won't Windows 7 install? – there are quite a lot of problems, but we will highlight the main ones:

• The problem is Windows distribution, especially if it's a repack;
• Problem with installing Windows on a flash drive/disk, that is, some kind of failure in the boot record;
• The problem is in the flash drive/disk itself and the drive;
• Incorrect BIOS setup or its obsolescence.

So, in order to determine why Windows 7 won’t install, the error can be completely different (it’s better to look for it specifically in order to narrow down the reasons why the problem arose), you need to gradually go through each item, which is what we’ll do.

Faulty Windows distribution

The problem may occur if you booted Windows from outside. Since the “master” can be very different, you can expect any outcome. Although there is nothing left but to download the OS from another source.

A typical manifestation of such a problem is the presence of errors during installation, especially if it constantly occurs in a certain place. It may also be that the flash drive does not show the option to install Windows 7 at all, but this may not be the only reason.

To definitely not consider this option anymore, use the original disk or try loading a different image. Also check that you have installed it correctly.

Windows 7 cannot be installed from a flash drive/disk

Here you should make sure that the information on the media is correct. This problem is very common, as it occurs due to the use of defective or inappropriate programs to create an installation flash drive. You need to use another application, here are the ones that should work: WinSetupFromUSB or UltraISO.

Usually, if there were any failures during the recording process, then you will not see the flash drive at all as a launch medium or various errors will arise during the process: the absence or malfunction of some files.

The same applies to a DVD that was not recorded correctly or that errors occurred during the burning process. Here you should burn the disc again, only using the minimum speed, because this prevents many problems.

Windows 7 won't install - faulty media

The problem is relevant for both DVD disc(more often) and flash drive (less often). This usually means that the disc is too scratched or not recorded properly, or there may be some mechanical damage. The situation is similar with a flash drive, check its functionality on another computer, in particular, try writing/copying several files. Using a standard check (RMB-Properties-Service-Check Disk), make sure that it is working properly.

Also try, in the case of a flash drive, to use the rear USB connectors since they have direct access to the motherboard, those on the front side use an extension cord, which may cause problems.

When using a disk, you should be sure that the disk drive itself is working properly, since in a situation where the laser loses power, there may be failures in reading information, and this will lead to an error.

These problems are characterized by a situation where they are not displayed at all in Windows or failures constantly occur in a random place (in the case of a disk drive).

Why won't Windows 7 install? BIOS problem

The first reason is an outdated BIOS. Thus, it has lost its relevance and can no longer perform some modern tasks, for example: older versions do not support large volumes of media. It is better to update the BIOS or you can use stripped-down media or Windows.

When using USB 3.0, problems may occur when they do not install Windows drivers 7 as it is not generally designed to use this standard. A problem occurs when installing the original version. A solution can be found if you use additional drivers or third-party OS assemblies. You can also physically switch the drive to a USB 2.0 connector or disable the USB XHCI Controller in the BIOS, and for external HDDs-AHCI.

Also, if Windows 7 is not installed on a laptop, then you should disable the Secure Boot option, which is used mainly in Acer and Asus, but often works in others.

So, we found out what to do, Windows 7 won’t install for technical reasons, but it’s also worth mentioning that sometimes protection against installing a system other than the preinstalled one is simply turned on.

We have figured out what to do if Windows 7 is not installed on your computer, so even if you have not yet encountered such a need, you will be ready to identify and fix the problem at any time.

If you still have questions on the topic “Windows 7 won’t install: how to fix the main errors?”, you can ask them in the comments

Good day, readers.

Installation new system to your computer, although it seems at first glance to be a very complex operation, it is nevertheless not one. If you look at it in detail, the whole process consists of a few simple steps, following which users will get the desired result. But sometimes unforeseen situations still happen. So, sometimes users get an error when Windows installation 7. What to do in this case? In the following article, I will talk about the most common problems associated with placing the above OS on a computer, as well as solutions.

There are many options why the operating system refuses to install on your device. Therefore, it is worth carefully observing when exactly a failure occurs. In this article we will look at installation from a flash drive and CD.

So, if problems appeared during the transfer system files- even before selecting partitions on the hard drive - most likely there are problems in the media itself. To solve this you need to use the HDD testing program.

Important! A similar situation may arise if the installation is also carried out on a new HDD. To fix the problem, you must first format it and split it into sections. It is best to do this using another computer.

Another popular reason is incorrect entry information on removable media(or reading from it). This usually applies to CDs, since they are more susceptible to damage than other data transfer media. As a result, problems with system installation may appear at any second. Most often in such cases, a blue screen with an error appears before your eyes. This usually explains that the file was not found.

In addition, problems arise due to incorrectly formatted media. Typically, users install the wrong file system.

Sometimes the cause is USB 3.0 connectors, since drivers may simply not be found in the distribution. It turns out that you can see the device in the BIOS, but the installer will slow down the process.

Solving Common Problems( )

There are a number of actions that can be performed to ensure that the installation of the x64 maximum version or any other operating system continues:

Rare errors( )

Sometimes users, when something doesn’t work out on their device, remove the hard drive and install it on another “ iron", initiate the installation of the OS, and then return the hard drive to its place.

It’s worth saying right away that such an operation will definitely not lead to the desired result, and in addition a message will appear: “ Windows failed to start».

All this indicates equipment incompatibility. In other words, the system will require those elements for which all drivers are already installed. And yet she will not find them.

In addition, users can see the inscription: "". By and large, this situation points to the same thing. In this case, the cause may also be an incorrectly recorded image on portable device. Try to create on another computer boot disk again. The main thing is not to rush and set all the settings correctly.

In rare cases, if you boot from a disk, this may appear as a result of connecting a new hard drive to an old motherboard. In order for everything to start working, you need to go to the manufacturer’s official website, where the appropriate settings that are set in the BIOS for normal operation should be indicated.

If you see the error " Disk error“When you install a new operating system on a laptop, you shouldn’t immediately panic and think about hard drive problems. If you are using a USB memory, try placing it in a different slot until you reach the last one. If this happens with a plastic disk, you might want to think about switching to a flash drive.

The optimal distribution media for reinstalling the operating system is a removable USB drive, but along with many advantages, it also has several disadvantages. At any stage of OS installation, starting from downloading and deploying the image to a USB flash drive and before the first boot of the computer, an error may appear when installing Windows 7. It can complicate the process of reinstalling the operating system and take a lot of time to solve it. This article discusses frequently occurring problems that arise during the installation of Windows 7 from a flash drive and tips to avoid them in the future, be it a problem with a damaged file - 0x7e, 0x80070570, indicating hardware problems, or 0x0000005d - lack of support for the CPU used by the "seven" "

Problem 1

Probably the shortest code under which one of the Windows problems 7, or rather its installer, is 0x7e.

The reason for the appearance of such a window with problem 0x7e is damage to the file specified in it (in the example, autorun.dll). During decompression and copying of installation files packed in a WIM format archive, Windows installer, called Installer, checks the checksums of each of them. A checksum is a value calculated using a specific algorithm that is used to control the accuracy of data transfer. Error message 0x7e occurs when this checksum does not match, signaling the following:

• you downloaded an inoperative assembly of the operating system (the author modified the system file) - download a new image, preferably the official one from Microsoft;
• image with installation files was downloaded with an error - rehash the ISO file in a torrent client;
• During image deployment, one of the files was damaged during recording - burn the image again using the USB/DVD Download Tool.

Also, code 0x7e may indicate the presence of damaged memory cells on the flash drive - check the drive.

Problem 2

The second most common error is error code 80070570.

The reasons why 0x80070570 appears are usually hardware components rather than user actions.

• Damaged sectors on magnetic plates hard drive– when trying to write a file, the installer is faced with the fact that the hard drive refuses to write the proposed bit to the specified sector. This is due to the fact that this sector is not operational, therefore it is impossible to write to it.

Launch the system chkdsk program, which will allow you to get rid of problems with code 80070570 and 0x80070241 via the command line.

In the window where you click “Install”, move the cursor down and click “System Restore”.

This way you will avoid error 80070570 if the HDD is the culprit.

The second factor in the occurrence of the message with code 80070570 is the problematic functioning of the RAM. In this case, download, for example, MemTest and test the RAM for unhealthy cells.

The testing procedure can take several hours if you have 8 GB or more of RAM - keep this in mind.

The third reason why a message with code 0x80070570 appears is the use of a fairly outdated BIOS. If Checking RAM and HDD did not give any results, ask yourself: “When was the last time I updated the BIOS and did I update it at all?” There are plenty of instructions on how to perform a BIOS upgrade on the Internet – we won’t dwell on that.

Remember: if previously “Seven” was installed from a flash drive normally, then the problem with error 80070570 lies in disk or RAM, or in the use of very old version Windows 7 - download a newer image.

Problem 3

Code 0x8007025d indicates problems with RAM or corruption of system files when installing the “seven”.

To avoid error 0x8007025d, first of all, download another image and write it with hash verification to a flash drive via Rufus or WinPEto USB. If this doesn't help, test RAM using MemTest.

It is best to perform this type of check by booting from a LiveCD that includes this utility in the distribution.

Problem 4

0xc0000098 – appears mainly on old Dell laptops. Due to the lack of new drivers for old 7 hardware, many owners of these devices are forced to settle for Windows XP.

For other cases of getting out of the situation when an error occurs, you need to download the Russian DLL Suite with a key generator and start searching for problems. As a rule, the file ntknrlpa.exe will appear in the list of problematic ones. We restore it and be sure to scan the computer for the presence malware, which modified this file. As a result, the window with code 0xc0000098 will disappear.

If you can't boot into Windows to resolve the issue that is causing problem code 0xc0000098, use the Command Prompt or LiveCD to do so.

Problem 5

Message with text " Error code 0xc0000260" occurs mainly during the installation of "seven" or "eight" on virtual machine from a flash drive.

The window with error code 0xc0000260 is removed by configuring VirtualBox:

• turn off the virtual machine;
• activate the 2D and 3D acceleration option;
• When using the 64-bit edition of Windows 7, we also enable VT-X support.

This way you can avoid error 0xc0000260 and easily install Windows on a virtual machine from a flash drive or an image located on your hard drive.

Problem 6

Error 0x0000005d has been disturbing a huge user audience for a long time, but there is a lot of information about it global network almost impossible to find. However, users were able to learn from Microsoft representatives that 0x0000005d means it is impossible to install Windows 7 on a PC due to the absence of a processor installed on it in the list of those supported by the “seven”.

In order to install Windows 7 on a computer where a problem with code 0x0000005d occurs, you will have to replace the CPU. Another option to avoid the message with 0x0000005d is to use a supported operating system by the processor.

From now on, knowing how to solve and avoid common problems during the installation of Windows 7 on any computer that supports it.

(Visited 20,381 times, 1 visits today)

Let's look at many ways to report the "Installing Windows on" error. this disk impossible. The selected disk has a GPT partition style." Previously, there was an old MBR disk partition system and it could no longer operate with the new amount of data TR (terabytes). They came up with a GPT system for disks and it was introduced with the new graphic bisos uefi. Let's proceed to the presented dilemma with our own , standard means. I would like to note that some users described their actions as simply going into bios and disabling UEFI mode. It all depends on many factors, including the Windows architecture, 64 or 32 bit.

Solutions: Windows cannot be installed on this disk. The selected disk has GPT partition style

1. Change UEFI boot mode

Nowadays most motherboards Support both traditional boot and UEFI Boot. Users can choose the most suitable one in the bios settings. Look carefully! Everyone's bios is different.

• Change value UEFI, instead of CSM in the Feature or Setup section.
• In the Peripherals line, click SATA mode: AHCI instead of IDE.
• (This step is optional, try it if the above doesn't work). In the Key Management function line Secure Boot, which is located on the BOOT tab, change Other OS instead Windows UEFI Mode.

If you record from a flash drive and this method does not work, then rewrite . Unforgettable! Press f10 to save the settings.

2. Removing partitions when installing windows

If you don’t mind the data and want to do everything quickly, then delete all partitions when installing Windows, and then format the entire hard drive. Then re-create the partitions you need. This will create a new table on the hard disk.

• Remove all disk partitions.
• Recreate them.

Format ( The method will erase all data).

3. Convert or convert GPT disk to MBR

The method will erase all data.

• When the error appears, click OK to close the error message and press Shift + F10, Shift + Fn + F10 (for laptops) to open cmd (command prompt). If nothing works, then go back a step to the windows installation interface and press the Shift + F10 button to launch cmd again.

• Enter the following commands in order: diskpart -> list disk -> select disk 1 -> clean -> convert MBR. Line translation: diskpart program -> list of disks -> select disk 1 (1 indicates the number of GPT disks) -> clear -> MBR conversion. The picture shows what commands were entered. You can type the codes into a line based on the picture. When the diskpart program converts to MBR format, you can exit the program and continue installing Windows.

4. Use standard disk management utility

• To start the program, click "start", right-click on "my computer" or the icon on the desktop, select in context menu"Management" and "Disk Management"
• Delete all partitions or volumes on the disk one by one by right-clicking, “delete volume”. (Delete Volume)

• When the disk becomes unallocated, click on the disk and select " convert to MBR disk" (Convert to MBR Disk). After these steps, the original GPT disk will be converted to an MBR disk, and then you can proceed to install Windows on this disk.

Not every user has a DVD drive; moreover, Lately Rare PCs are equipped with them. But you still need to install the system and for this it is most convenient to use bootable USB flash drive. Let's figure out how to install Windows 7 from a flash drive - after all, you won't buy a DVD for this purpose.

Before proceeding with installation, please read carefully this article: Various difficulties may arise in the process, which can be solved using one of the methods described below.

The installation process itself can be divided into the following stages:

• downloading the installation image;
• computer preparation;
• creating a bootable flash drive;
• setting up PC BIOS;
• Windows 7 installation.

Let's look at each stage in more detail.

Before you burn the image to a flash drive and install the system from it, you need to download it. Today there are a huge number of ready-made operating system builds, which are equipped with many applications and functions.

Very often in such distributions the default theme or sound scheme is changed. But not all users like such innovations. You only need to download original images, created by Microsoft. A huge headquarters of the world's leading programmers does their job better than some artisanal modifier.

A little lower you will find a button where you can download a torrent file to download the Russian version of Windows 7 with 32 or 64-bit architecture. The file was taken from the official Microsoft website and is completely original. Proceed with the download, and when the download is complete, move on to the next step.

After the file is downloaded, open it using a torrent client. If you don't know how to work with such programs, follow our step by step instructions.

1. First, download the torrent client itself. This will be the qBittoorent application.
2. Install the program and use it to open the previously downloaded torrent file.

1. Choose Windows version 7 (in our case it’s professional 64 bit) and click “OK”.

1. After this, the operating system will begin loading at the maximum available speed.

Getting ready to install Windows 7

First of all, we need to copy to a safe place all the information that is important to us, located on drive C. Each user stores data in their own way, so each user has their own choice of folders for backup. Most often these are folders: “Downloads”, “Desktop”, etc.

You can save files to another logical drive (the one on which the system will not be installed) or to external storage. You can also use cloud storage, if there is not too much data. For example, the Mail.ru cloud provides 100 GB of free space.

With an eye to the future, remember: while using your PC, you need to store your data on a disk other than the one on which the system is installed. Divide physical disk into partitions and save your files on any of them except the system one. To install Windows 7, a comfortable volume of 70–100 GB will be (depending on the type and amount of software used).

Another important point that should be taken into account before the installation begins is the drivers for our network card. If, after installing Windows 7, it turns out that there is no driver for the network card, additional difficulties will arise that will have to be solved using a second computer by transferring files from it via a flash drive.

If you just bought a computer, there is not and cannot be any valuable information on it, feel free to move on to the next section, without copying the data.

Create a bootable USB flash drive

In order to create bootable media and begin the operating system installation procedure, we will need:

• USB flash drive with a capacity of 8 GB or more. Instead of a USB flash drive, you can use a simple memory card with a card reader;
• "Seven" installation distribution with .iso extension;
• a utility with which we will write an image to a flash drive;

Attention! Before you start creating installation media, remember that all data on it will be irretrievably destroyed.

Making installation media using Ultra ISO

A well-known disk imaging program can create bootable media. Let's look at the algorithm for recording Windows 7 to a USB device.

1. Download and install the Ultra ISO program from the link.
2. Run the resulting file and check the box to “I accept license agreement" Proceed to the next step by clicking “Next”.

1. Using the “Browse” button, select the installation path, then click “Next”.

1. We don’t change anything here and just move on.

1. The program is being installed, we are waiting for it to finish.

The Ultra ISO installation is complete, you can run it and go straight to creating a flash drive for installing Windows 7.

1. The Ultra ISO program can be launched in trial mode, so its functionality will not suffer at all. Click on the button marked in the picture.

1. Go to the “File” menu and click on the “Open” item.

1. Select the Windows 7 image we downloaded, and then “Open”.

1. Go to the “Startup” section and click on the item that we marked in the screenshot.

1. We make sure that the media we need is displayed in the devices at the top of the window and click on the “Format” button.

Attention! This will destroy all your data beyond recovery. If the USB storage device has necessary files, save them before doing this.

1. In the next window, simply click “Start”.

1. Ultra ISO will once again warn us that all information from the flash drive will be erased. Click "OK".

1. After formatting is completed, click on “Burn”.

1. The process of recording “Seven” onto a flash drive has begun. It will take about 5-10 minutes depending on the speed of the drive and the selected OS version.

The recording is complete, our media can be used.

Let's look at a few more options for creating bootable media with Windows 7.

Rufus

This is another program that can create a bootable USB flash drive with “Seven”. Let's get started.

The application, unlike Ultra ISO, does not require installation, so you can run the downloaded file and immediately proceed to the process of burning the OS to a USB device. To do this we do the following:

1. Select the recording device. This will be our flash drive, in this case – 16 GB. Then click on the disk icon.

1. Select the distribution we downloaded in the PC folder.

1. We begin the recording process with the “Start” button.

1. Rufus will notify us that all files will be deleted from the flash drive. If you have already created backup copy or there was no important information on the media, click “OK”.

As a result, it will begin Windows entry 7 onto a flash drive, after which you will have a full-fledged installation media at your disposal.

Attention! Before you begin the process of writing the system to a flash drive, be sure to save all the data on it - otherwise they will be irretrievably lost.

As we see, this method turned out to be much simpler than the previous one, but we will not dwell on this and will consider several more options for recording Windows 7 to a USB drive.

Making a bootable USB flash drive using WinSetupFromUSB

Another application focused solely on writing operating system files to an external drive. Let's take a look at the utility and look at the process of working with it.

1. Select the path where the program will be unpacked (click on the button with the image of three dots) and click “Extract”.

1. We are waiting for all the necessary files to be unzipped.

1. We open the directory into which the unpacking was carried out and launch the program depending on the architecture on which your operating system is built. For us it is 64 bit, so we click on the marked file.

1. We insert our flash drive into the USB port and make sure that it appears in WinSetupFromUSB. Next, check the box indicated by the number “2” in the screenshot. When the bird is placed, click on the icon with the image of three dots, marked with the number “3”.

1. Select the image of our operating system and click on “Open”.

1. All that remains is to press the “GO” key and Windows 7 recording will begin.

Windows 7 is being written to an external drive. Once the process is completed, the flash drive can be used to install the system.

We will not stop at WinSetupFromUSB and will tell you how to burn the OS to media via Windows 7 USB/DVD Download Tool from Microsoft.

Windows 7 USB/DVD Download Tool

This is an official application from Microsoft, so it should, in theory, do the best job of writing Windows 7 to a flash drive. Let's get started with the program.

1. First, download the utility using . Then we launch it and click on the “Next” button.

1. We are waiting for the program to install.

1. We complete the installation process by clicking on the “Finish” button.

1. Let's move on to working with the program. Initially, we need to specify the file that we will record. To do this, click the “Browse” button.

1. After the path to the image file is registered, you can proceed to the next step - click “Next”.

1. Here we should select the type of media on which we will install the “Seven”. Since this is a flash drive, we click on “USB device”.

1. We make sure that our drive is displayed in the field marked with the number “1” and click on the “Begin copying” button.

1. After this, we will be warned that all information from the media will be erased and, after confirmation, the process of transferring Windows 7 to a USB drive will begin.

Upon completion, we will receive a bootable USB flash drive, with which it is easy to install the OS on your computer.

The program requires the Microsoft . NET Framework 2.0. If you do not have it, then download the program from the official Microsoft website.

We use the UNetBootin program

The UNetBootin utility is completely free. you can download it without registering or sending SMS. The program does not need to be installed - it works immediately after downloading. An application was created not only for recording on Windows flash drive, but also other operating systems such as Linux or Mac OS.

Let's move on to the instructions for using the application.

1. First of all, check the “Disk Image” box and click on the button with the ellipsis. In the window that opens, we need a Windows distribution.

1. In the drop-down list indicated by the number “1”, select a USB device, indicate our flash drive and click “OK”.

1. The application will warn us that all data that is already on the flash drive will be irretrievably lost. If we don’t need them, click “Yes to All”.

The distribution package is being written to a USB device. Once it is completed, the flash drive can be used to install the OS.

Command line

You can create bootable media with “Seven” without using any programs using the system itself. For this we will use the command line.

The entire process is described in the form of detailed step-by-step instructions, each stage of which is accompanied by a screenshot for clarity.

1. Initially, launch the command line. This must be done exclusively as an administrator. We will create bootable media at Windows example 10, but you can get the same result on Windows 7 – 8. Press the Win + R button combination and in the window that appears, press the “Browse” key.

1. We follow the path indicated in the screenshot with the number “1” and find the cmd application. We right-click on it with our manipulator and select “Run as administrator”.

1. We write to command line command diskpart and press Enter.

1. To start recording to a disk, you must initially select it, and take this choice responsibly, because all data from it will be deleted. You can view a list of disks using the operators: “list disk”, “list volume” or “list partition”. The first two show a list of disks, the third displays the number of partitions and their names. Insert the flash drive into the USB port and enter the “list disk” command in DISKPART. Next press Enter. You will see a list of all drives installed on this moment in PC.

1. Select the disk that we need. To do this, enter select disk disk_number. The disk number can be viewed in the previous step; for us it is “1” since its size is 14 GB, which corresponds to our flash drive.

1. We remove the disk with the clean command. Make sure you do it again right choice– all data on the media will be completely deleted.

1. Now we need to create the main partition for the flash drive, from which we will boot in the future. Enter the command create partition primary and press Enter.

1. We set the drive letter using the assign letter=drive_letter operator. Let's do that. We know that our PC has drives C, D and E - therefore, we specify F. The final command will look like this: assign letter=F.

1. You can also specify the partition size. If you skip this step, it will take up all the free space. You can set the size of a logical disk using the create partition primary size=disk_size command. The size must be specified in megabytes.

1. Select our disk using the select partition 1 command (indicate your disk number) and press Enter.

1. Now we need to make our section active. To do this, use the active operator.

1. All that remains is to format the flash drive - write a command like this: format fs=fat32 quick.

1. Exit DISKPART using the exit command. Now you need to prepare the files for recording. We unpack our Windows 7 image using any archiver (we will use the usual WinRAR) and extract all the files to our flash drive.

The installation media is ready and you can use it.

We use the WinToFlash program

Let us describe the process of working with another program for recording Windows 7 and other operating systems on a USB drive. To get started, download the utility from the link from the official website.

1. Install and run it. In the window that opens, select the item marked with a red frame.

1. At the very top, select “Windows”, then indicate Windows 7 and press the button indicated in the screenshot with the number “3”.

1. Specify the path to Windows image 7, which we downloaded. To do this, click the “Select” button.

1. Click on “Add”.

1. We make sure that the flash drive we need is indicated as the target, and click “Run”.

After this, the process of creating bootable media with Windows 7 will begin, after which the device will be ready for use.

Burn a bootable USB flash drive using WinToBootic

This application is one of the simplest tools for recording operating systems to external media. To work with the utility, you do not need to install it, nor do you need administrator rights. You can work with both Windows files and its images. The interface here is simple, and the speed of the program is pleasing.

To burn Windows 7 to a USB flash drive via WinToBootic, do the following:

1. First, download the program and launch it. Check the box next to “Quick Format” and click “Do It!”

1. We answer the request for formatting in the affirmative.

1. We are again notified that all data on the flash drive will be deleted. Don't forget to save important information from the media, if it is there, and click “OK”.

1. The preparation of the flash drive is completed, click “Thanks!”

1. Next, select the files that will be written to our flash drive. To do this, click the icon indicated in the screenshot and select the image we need.

1. Click the button to start the process again.

Windows 7 will begin recording to the USB flash drive. When it is finished, the device can be used to install the system.

How to boot from a flash drive

To successfully install Windows 7 from a flash drive, it is not enough for us to simply write operating system to the media, you also need to force the PC to boot not from the hard drive, but from the USB drive. This can be done in two ways: either by modifying the BIOS, or through a special boot menu.

Regarding the Boot Menu, we can say that it is launched using different keys, depending on the model of the computer or laptop. You can see which button is responsible for this on your device in the instructions for it. We provide a list of combinations for the main brands of computers and laptops:

Launching Boot Menu on PC:

Launching Boot Menu on a laptop:

Below is a list of keys that launch the BIOS on different computers and laptops:

For clarity, we will show the process of installing a flash drive as the first boot device using the example of our PC with motherboard Asus:

1. We turn off or restart the computer and after it starts, press the button to go to the BIOS (for us it’s Del).

1. This is what the BIOS itself looks like.

1. Go to the Boot tab.

1. We install our USB drive as the first device.

The process is similar on different computers, although the names of the tabs and items may differ. In order to understand how to enter the BIOS of your PC, read the instructions for it.

Installing Windows 7 from a USB flash drive

After the BIOS has been configured, you can proceed directly to installing Windows 7 from a flash drive. Let's get started.

1. Immediately after the system starts, you will see the following window (data for installing Windows 7 is being preloaded).

1. Set regional parameters. Select your system language, region of residence, and keyboard layout. If desired, all this data can be specified after Windows startup When the setup is complete, click “Next”.

1. At the next stage, simply click “Install”.

1. All you have to do is accept the license agreement and the installation will begin. Check the box as shown in the screenshot and click “Next”.

1. Select a mode complete installation- This is the so-called clean option, when all old data on the system partition is deleted.

1. We are in the section settings menu. Click on the entry outlined in red.

1. If your disk is not partitioned, you can do this here (for Windows 7, it would be best to use about 100 GB of free space, the rest will become drive D). Don't forget to format system partition before installing Windows on it. When the operation is completed, click on the “Next” button.

1. Finally the Windows installation began. We are waiting for the process to be completed.

1. Next, the system will reboot and we will be greeted with the Windows startup screen

1. Initial optimization is underway. The system prepares all the necessary files.

1. System services begin to start.

1. After which we proceed to complete the Windows installation

1. We are again informed that we need to restart the computer. Before doing this, be sure to remove the flash drive when restarting the PC.

1. The system will check how productive our video card is.

1. Now we need to provide our details. We write an arbitrary name and computer name. Then click “Next”.

1. If necessary, you can set a password that the system will request upon startup. We skip this step since the computer will be at home.

1. If you have Windows key 7, you can enter it here, however, you can do this even after the system starts. We skip this step.

1. We choose the system protection option depending on our personal preferences. We will be installing another antivirus, so the regular one will not be needed.

1. Enter the time and time zone. Then click “Next”.

1. We decide on the type of network. This is quite an important step, because if we specify home network, but we are connected to the public, our security will suffer greatly.

1. Settings are being applied and automatic setting networks.

1. Last minute of optimization before our Windows 7 launches.

As a result, we installed Windows 7 from a flash drive, the creation of which was described above.

Instead of an afterword

We've looked at a ton different programs and tools from Windows itself to answer the question: how to install Windows 7 from a flash drive. However, these are not all options. There are a lot of such programs on the Internet. They differ in their convenience and functionality. Some utilities are better suited for ordinary users, the second - for professionals.

Which method to choose and how to write Windows 7 to a flash drive should be determined based on purely personal preferences. Use the option that you like, and if you have any questions, ask us in the comments. We undertake to give a comprehensive answer as soon as possible.