Windows 7 takes a long time to install
- The propeller is old, there are many errors, the speed of the propeller is low.
- Either the computer is old, or the disks need to be formatted/assigned/partitioned.
- Check HDD and/or RAM.
- This drive or disk is damaged.
- 2 hours!
- Just 30-40 minutes. Ideally. If the computer is slow, then it can increase to an hour, sometimes a little more. Everything is going fine for you, it will end soon.)
With this configuration, count on an hour until it starts completely. - weak computer, scratched disc
- It is quite possible that the capacitors on the motherboard are swollen! Remove the side cover of the system unit and look for any swelling. When they swelled up for me, the choice of language was shown after 5-7 minutes! A license agreement in 7-10 minutes! After resoldering, it began to show instantly! This could also be the cause of a faulty random access memory(1 or more strips may be faulty) . And the computer seems far from weak, but it takes so long to install. . My computer is 8 years old, its characteristics: percent AMD Athlon XP 2600+ 2.2 GHZ, 512 MB memory, so Windows 7 maximum was installed on it in 8-10 minutes! The maximum is 12! And she was ready to go!
- Iron is rather weak.
- Don't worry, this happens on some motherboards.
Try setting it to 8, just to understand what the problem is - all of the above are complete nonsense, what does the hardware have to do with the old one, in short, the theme was always like this, everything loaded fine, everything loaded quickly, one fine day for some reason it took a long time to load!
- the system is not compatible or
1. Required:
Make sure your computer meets the minimum system requirements.
Find the official distribution.
Write it down in one of the following ways: 1, 2, 3, 4 on a flash drive or on a high-quality DVD-R disc(Do not use DVD-RW!) at minimum speed.
Recreate (delete and recreate) the HDD partition from the installer. Format the partition from the installer and make sure that the system sees the volume correctly.
Why http://support.microsoft.com/kb/2272294/ Advanced format
Remove overclocking, if available.
Test the memory and replace faulty modules.
Windows 7 does not support USB 3.0 out of the box. Therefore, when installing from a flash drive, connect it to USB port 1.x/2.0. If you only have USB 3.0, you will have to stock up on drivers - they will help you find them here.
If the problem is related to the image (its absence), check and disconnect all additional devices, for example, LCD TV, etc.
If, after fulfilling all the prerequisites, the installation does not complete successfully, move on to additional steps.2. Additionally:
If it does not install from DVD, try from a flash drive, disabling the DVD-ROM. If it doesn't install from a flash drive, try from a DVD.
Disable everything unnecessary in the BIOS: LAN, Audio, IEE1394, FDD, etc.
Disconnect unnecessary wires and devices from the computer, leave only what is necessary: mouse, keyboard, monitor, power. The rest - disable or remove. Disable all non-essential devices (card readers, expansion cards, etc.) inside the case.
If there are several in the system, leave:
1 HDD
1 GB of known good memory. If there are several planks, leave only one at a time.
video card
if needed - DVD-ROM
If the keyboard and/or mouse are connected via USB, find one with a PS/2 connector and try with them.
Connect the monitor to the VGA output of the video card. If the video card has 2 identical connectors, try connecting to the second one.
If there are two video cards - one built into the motherboard, the second additional (PCI-E, PCI, AGP) - remove the additional one and reconnect the monitor to the built-in one.
Reset BIOS settings.
Update the BIOS from the manufacturer's website motherboard. They'll help you find it here.
Press F8 before starting the installation (immediately after Press any key to boot from CD or DVD) and after each of the 2 reboots and select the 640x480 mode.
If you already have Windows XP or Vista installed on your computer, download the Windows 7 Upgrade Advisor before installing Windows 7. It checks for availability on your PC possible problems with equipment, devices and installed programs, and also provides recommendations before upgrading.
Hello readers of the blog of the ComService company (Naberezhnye Chelny)! This weekend I came across a computer on which I needed to install Windows 7. But a problem appeared that I encountered for the first time. When I launched Windows installation 7, the installation window did not appear (first window, language selection). And then the seven took a very long time to install. If you have the same problem when, and The installation window does not appear, then now I will write how to solve this. At least I’ll tell you how I solved this problem.
I'll probably start from the beginning. They called me and asked me to come and look at the computer, and then: the Internet does not work (Intertelecom there), the antivirus always shows some window, nothing starts, etc. In short full set all kinds of breakdowns. And I’ve already dealt with this computer, such a powerful “machine”, new, only Windows XP is installed on it, not that it’s bad, it just surprised me. And when I asked the owners why Windows XP was installed, they said that they installed it in the store. I said that it wouldn’t be a bad idea to set it to seven, after all, it’s newer, and on the same hardware.
I came a second time, turned it on, and there was something incomprehensible there. Perhaps it was a virus that worked this way, or it was children :), but Avast stuck some kind of warning, there were almost no icons on the notification panel, the Internet did not react in any way to an attempt to open a connection, the theme was changed, and it was not possible to return to the standard one. And many more different unpleasant moments.
I looked and decided that it would be easier to demolish everything, format the C and . After explaining everything to the owner of the computer, we decided that we would do just that.
Windows 7 installation window does not appear
Everything is fine, the computer rebooted and booted from the installation disk. The file loading bar appeared when installing Windows 7, and when the language selection window should appear, nothing happened. The window did not appear, there was only a splash screen (well, the same as when installing seven) and a cursor. I waited about three minutes and restarted the computer. I realized that something was wrong. I decided to go into the BIOS again and look at the settings. Now it’s clear why the store installed Windows XP; most likely, installing Windows 7 failed.
I eliminated the problems with my installation disk immediately, I have installed it more than once. Yes, and I had an exact copy, with which the Windows 7 installation window also did not appear. I didn't see anything strange in the BIOS, and... It did not help, Windows 7 was not installed, the language selection window did not appear. I decided to open it again system unit and see how and what is connected there. I didn't see anything interesting there. A hard drive and an optical drive were connected via the SATA interface.
Windows 7 takes a long time to install
I tried to run the installation again. I launched everything the same, only the background, but there is no window with a choice of language. I decided to wait. About 5 minutes later a window appeared with a choice of language, well, at least it’s something, I thought. I clicked next, the message “Starting installation...” appeared, and that’s it. The computer was “thinking”, I understood this from the fact that the cursor was spinning (something was loading), I decided to wait a little.
After about 10 minutes, a window appeared in which I selected a clean installation of the system, again waited 5 minutes, formatted the partition for Windows 7 and began copying files. They took longer to copy than they should have, it seemed to me. In short, with grief in half, I installed Windows 7. Then I realized what a long 7 is :).
Slow but established
The computer worked as expected from such hardware, very quickly. All that remains is to configure it. But I didn’t have a driver for the modem, so they decided to take the system unit to me and pick it up the next day.
Finding reasons for slow Windows 7 installation
At home, I set everything up, and decided to torture the computer a little more and find out why it was taking so long to install Windows 7, I was interested. Moreover, I did not find a specific answer to this question on the Internet, only guesses.
Setting up a SATA hard drive in BIOS
To begin with, I opened the system unit and changed the connections hard drive and drive. I connected the hard drive from SATA 0 to SATA 1. And the CD/DVD drive to SATA 3.
Then I went into the BIOS again. I was interested in the SATA controller settings. Section "Integrated Peripherals".
Against OnChip SATA Controller the parameter was Enabled. Okay, then we see the item, I have the Native IDE option. This is not very good for a SATA hard drive, as it will not show all its capabilities.
Changed the value of the OnChip SATA Type parameter to AHCI (the best option for SATA drives). I tried to turn on the computer. The drive was not detected at all, and as soon as Windows 7 started loading it blinked blue screen, and the computer rebooted.
I decided to set RAID instead of AHCI in the OnChip SATA Type parameter (combines disks into an array), nothing worked (I knew it was useless, but decided to try), everything is the same as with AHCI.
Installed it back Native IDE. All these experiments did not help. Although it is very strange why AHCI did not work, I never understood it.
Disable Drive A
I also saw that opposite the Drive A table the parameter “1.44MB, 3.5″. This is a disk drive, and this computer does not have one. So I set it to "None" to tell the system that it is missing.
I saved the settings by pressing F10. Put installation disk with Windows 7 and tried to run the installation again to check how the seven would be installed, just as slowly or faster.
And to my surprise, everything worked as expected, a window quickly appeared with a choice of language and so on, I quickly got to formatting the disk. Of course, I didn’t format it, since the computer was already set up and should have been picked up by now.
How to solve the problem of slow installation of Windows 7?
Let's summarize, otherwise I've scribbled a lot of text :). There was a problem with installing Windows 7, it took a very long time to install, and I had to wait a lot until the window with the choice of language appeared, and then “Starting installation...” hung for a long time.. If you have such a problem, then you can just wait and everything will be installed. I have it installed.
If you want to try to solve this problem, then:
Try setting AHCI in the BIOS opposite the OnChip SATA Type item (most likely it didn’t help me). Change SATA connectors for the hard drive and drive. Disable Drive A (disk drive).
I did the last two steps, and the installation of Windows 7 went quickly. I can’t say with 100% certainty that this is what helped restore the normal installation speed of Windows 7. But in any case, you need to try.
Sorry that there was so much text, I just wanted to describe everything in as much detail as possible. I hope that my experience was useful to you, if you managed to solve this problem, in this or some other way, write about it in the comments, it will be interesting and useful.
At times, when installing Windows 7, users think that the system froze during installation. However, this is often not the case and you need to wait a certain amount of time for it to continue. Freezes and crashes mainly occur when there is a problem with the work hard disk, but there are other reasons for the slow installation. This article will talk about such reasons and how to eliminate them.
The main reasons for freezes or slow installations
The first reason for a long download or slow installation process can be considered incorrectly recorded image or its damage. To check you need to change bootable media, you can also replace the image.
In the second case, the cause of the failure may be damaged hard drive. In this case, the installation may take a long time, or at normal speed, but be interrupted at the very end. You can write down special utility to check disks and test the hard drive.
Problems with RAM or other computer hardware components. In this case, various oddities and failures should have accompanied the PC even before the installation process began.
Incorrect BIOS settings. This item is the most common cause of crashes and freezes and should be checked first, before testing the rest of the equipment.
How to troubleshoot
You need to change several settings in the BIOS itself. These are the hard disk interface settings you need put inAHCI. This item is not suitable for those users who still use hard drives with an IDE interface. You will also need disable floppy drive. Next, several types of BIOS and the names of the corresponding items in the menu will be shown.
Settings for floppy disks
Bios Phoenix
For hard drives
BIOS Award
UEFI BIOS
Although changing these points is not obvious in this situation, it helps. If the user has set all the settings as recommended, but the problem does not go away, then it’s worth addressing checking other options. It's best to start with the boot drive and system image, as they are the fastest to check. If everything is fine with them, then it’s worth doing checking the hard drive on problems and reading speed. To do this, it is best to use one of the hardware testing assemblies, which may include programs for testing all hardware.
When installing operating system Windows 7 may experience a problem - freezing during installation. When the installation of Windows 7 freezes at the logo stage with the words Starting Windows, the cause of the problem may be a malfunction of the computer components: hard drive, motherboard, RAM. If the device breaks down, working with the system will not help - you just have to turn to repair specialists for help. If everything is in order with the hardware, but the Windows 7 installation window does not appear, then you can solve the problem in just a few steps, which we will describe in this manual.
The reason the system freezes on the logo is that it was not installed through the BIOS. Installing via BIOS is also called a “clean” installation because you format all data on the computer and accordingly delete information about previous system. How to install OS via BIOS?
Step 1. We insert boot disk with system () into the computer. Turn on or restart the PC.
Step 2. When the first inscriptions appear, quickly press the “Delete” key. The appearance of your BIOS varies by manufacturer.
Note! The design of the interface does not matter, since modern computers the basic BIOS settings are the same.
Step 3. If you managed to click “Delete” when booting the computer, the BIOS window appears.
Step 4. Move through items using the arrows on the keyboard. Press the right arrow until the “Boot” item opens.
Step 5.“Boot” is responsible for booting the computer from a specific device. By default, the computer boots from the hard drive. But now we need to install the system, which is located on a flash drive (or CD). Press the down arrow and .
Select the item “Boot Device Priority” - press “Enter”
Step 6. A small menu opens where we select the device from which the computer will boot. In our example, this is a DVD.
In your case, it may be the name of the flash drive or CD media. Select the device - press “Enter”.
Select the item “Boot Device Priority” - press “Enter”
Step 7 Exit the “Boot” tab – press Esc. This way the changes will be saved and take effect after a reboot. In the window that pops up, select “OK” and press “Enter.”
The computer will automatically restart. The problem is solved - the Windows system will begin a “clean installation” without freezing or crashing errors. It is by working with the BIOS that problems like “Win 7 won’t install!! hangs when starting installation."
Windows 7 freezes during installation and installs slowly - what to do
Does your computer freeze when installing Windows 7? We find a way to solve the problem.
The first thing you need to do is to look for the reasons for the slow installation of Windows 7. Let's look at the common sources of problems:
How to solve Windows 7 slow installation problem
For successful installation, two critical parameters need to be corrected:
- Serial ATA (SATA) Mode - switch to “AHCI”. It's more modern type data transmission. It will help not only in solving the installation problem, but also generally speed up the operation of the OS.
- Disable the floppy drive (“Floppy Drive”). Despite the fact that floppy disks are a thing of the past and you may not even have this device, we recommend disabling its use in the BIOS.
Disabling the floppy disk
Step 1. Open the BIOS and press the “Delete” key.
Step 2. Go to the “Advanced” tab.
Step 3. Select the “OnBoard Floppy Controller” item and press the “+” button. The text “Disabled” should appear opposite the line.
Step 4. Save the settings.
Change the mode to “AHCI”
About Windows operating systems
The Windows family of operating systems is the most popular. Microsoft Company has held a monopoly on the market for more than twenty years. For ordinary users the window interface has become familiar and convenient. But the main advantage of the Microsoft software product is its support for a huge amount of software. Professionals, from graphic designers to programmers, prefer Windows, since the programs they need for their work simply do not exist on other operating systems. The vast majority of video games are supported by Windows, something neither Linux nor Mac OS can boast of. The abundance of drivers for any components makes the system universal and makes it easier to use. When purchasing a device, you will always be sure that it will work on Windows without problems. Let's look at the history of significant versions of the popular OS.
- Windows 95. Served Starting point for the development of window systems. By combining the operating principles of MS-DOS and Windows family, the '95 system became a staple for desktop computers. Thanks to the simplicity of the window interface, Microsoft managed to occupy the niche of graphical operating systems and gain a foothold in the market. The Start menu, long file names, and Plug and Play drag-and-drop functionality became the foundation and signature style of all subsequent Windows systems;
- Windows XP. Released in 2001, the system created a real sensation among PC users. Before the release of the "seven", XP remained the main operating system. Simple, easy to install and use. Occupies a minimum of disk space. Today, Windows XP is not supported by the company, which affects its resistance to virus attacks. However, owners of low-power PCs and laptops install the system on their devices: it is not demanding on technology and works properly without taking up a lot of RAM or loading the processor. The only significant disadvantage of the system is its vulnerability to viruses due to the lack of updates. However, the problem is solved by installing latest version any reliable antivirus (Avast, Avira, Dr.Web);
- Windows Vista. Released in 2007. Was received coolly by the community. Visually beautiful, but demanding powerful computer and weak in terms of security, the system was a failure. Performance problems, poor driver support, and reduced capabilities turned out to be the main shortcomings of the OS. Nice GUI, as one of the few advantages, will go into the company’s next OS - Windows 7;
- Windows 7. The product was released at the end of 2009. “Seven” remained at the top in terms of installations for 8 years. The most reliable, simple and convenient system of all. It took the best of XP and became more productive. After the unsuccessful Vista, the "seven" was greeted warmly. Great personalization capabilities, support for a huge number of drivers, ease and speed of installation contributed to the system capturing the market. In 2018, it is still installed on computers, despite the end of official support and the lack of updates from Microsoft;
- Windows 8. It so happens that Microsoft succeeds “every time.” Metro's revolutionary flat interface was met with disbelief and criticism. Exactly appearance contributed to the failure of the system. Ordinary functions: personalization, uninstalling programs, shutting down and restarting have changed significantly compared to Windows 7. It became difficult for an inexperienced user to find them, and therefore, in order to get started, it took a long time to delve into and study the new interface. But the company made the right conclusions, modernizing the stability and appearance of the system, preparing an excellent release - Windows 10;
- Windows 10. Essentially, the system takes the best from Windows 7 and 8. Decent performance, additional settings for gamers to improve performance, store free applications and extremely simple parameter settings are the main advantages highlighted by users. After release, the system remained free for several months - for the first time in the history of Windows. Windows 10 is installed on new laptops by default. So, when buying a new device, you won’t have to pay extra money to purchase a license. Additional benefit systems - versatility. Windows 10 can be installed on both a computer and mobile devices: smartphones, tablets, and even Xbox. Multiplatform ensures synchronization of settings and data into a single account user. All the innovations and improvements helped the “ten” overtake Windows 7 in popularity and become a universal operating system for personal computers.
Video - Starting Windows freezes when installing Windows 7
If you decide to reinstall or install the operating system, but the installation of Windows 7 freezes, then in this article, I think you can find a solution. And now a little more detail about what exactly will be discussed.
Previously, when I was repairing computers, often, if a client needed to install Win 7, I had to deal with a situation where, after the appearance blue screen installation, the inscription “Starting installation”, nothing happened for a long time - that is, according to the sensations and external manifestations, it turned out that the installation was frozen. However, this is not the case - usually (except in cases damaged hard disk and some others that can be identified by symptoms) you just need to wait 10 or even 20 minutes for the installation of Windows 7 to proceed to the next stage (however, this knowledge comes with experience - once I simply did not understand what was going on and why the installation froze). However, the situation can be improved. See also: Installing Windows - all instructions and solutions to problems.
A damaged disk with a distribution kit, or less often a flash drive (easy to change, but the result usually does not change).
Damaged computer hard drive (rare, but it happens).
Something with the computer hardware, memory, etc. - perhaps, but usually then there is other strange behavior that allows you to diagnose the cause of the problem.
BIOS settings - this reason is the most common and this item is the first thing to check. At the same time, if you set optimized default settings, or just default settings, this usually does not help, since the main item, changing which can fix the problem, is completely unobvious.
Which BIOS settings You should pay attention if it takes a long time to install Windows or if the installation starts hanging
There are two main BIOS settings that can affect the speed of the first stages of installing Windows 7 - these are:
- Serial ATA (SATA) Mode - recommended to be set to AHCI- this will not only increase the speed of installation of Windows 7, but also imperceptibly, but will speed up the operation of the operating system in the future. (Not applicable for hard drives connected via an IDE interface, if you still have one and are using it as a system drive).
- Disable floppy drive in BIOS- most often, disabling this item completely eliminates the freeze at the beginning of the installation of Windows 7. I know that you do not have such a drive, but look in the BIOS: if you encounter the problem described in the article and you have a desktop PC, then most likely , this drive is included in your BIOS.
And now pictures from different BIOS versions that show how to change these settings. I hope you know how to enter the BIOS - after all, it was somehow set to boot from a flash drive or disk.
Disabling the floppy drive in different BIOSes
Enabling AHCI mode for SATA in different BIOS versions
Most likely, one of the points listed will help. If this does not happen, then pay attention to the points that were mentioned at the beginning of the article, namely, the serviceability of the flash drive or disk, as well as the DVD reader drive and the serviceability of the computer’s hard drive. You can also try using a different one Windows distribution 7 or, as an option, install Windows XP and immediately, from it, start installing Windows 7, although this option, of course, is far from optimal.
