Often inexperienced users, trying to configure their router, modem or ONT terminal on their own, get confused about the addresses. As a result, in the address bar of their browser, instead of the router address - 192.168.1.1 - they enter the wrong IP - http://192.168.1.2. Why? But because they do not carefully read the instructions for setting up access equipment. And it says that in order to go to the web interface of the router or modem for configuration, you must first manually register it on the network card static address 192.168.1.2 . It goes without saying that nothing will be available through this IP and the error “Server not found” will be displayed.

Now let's talk about how to properly configure a network card to log into an Asus, Zyxel, TP-Link, etc. router. To do this, you need to get into network connections. For this in all Windows versions(including latest version- Windows 10) you need to press the Win+R key combination, enter the command ncpa.cpl and click OK.:

Using this command, you can quickly open the network window. Windows connections. In it we find Connection by local network through which a computer or laptop is connected to a WiFi router. Right-click on it:

A menu will open. From this menu, select "Properties". The properties window will open network connection in which you need to select an item Internet Protocol Version 4 (IP Version 4):

And it is in this window that you need to enter the address 192.168.1.2 . This will be the IP of your computer on the network router<->PC. The router has an address of 192.168.1.1 - it must be specified as the gateway and preferred DNS server. The usual mask is used - 255.255.255.0.
By the way for WiFi adapter everything is written exactly the same.

After that, close all windows and launch a web browser, through which we again try to log into the router by entering not 192.168.1.2 , but the CORRECT IP of the ROUTER, which was specified as the gateway. And this time everything should work out for you.

This section of the site publishes articles on IT topics that can be extremely useful, especially for beginners.

Contents of the article

192.168.1.1 – login to the router, login and password admin

This article is for those who want to get into the settings of their router. This article can be considered a universal guide, since most routers use the default address 192.168.1.1. Regardless of what we want to do, look at some parameter or change some setting on the router, first of all we need to log into it. That is, enter the administrator login and password. Usually routers are accessible by this IP address or .

Setting up routers from the most popular and widespread manufacturers such as TP-Link, D-Link, ASUS, Tenda, Netis is generally approximately the same. As a last resort, you can look at the standard address from the factory. You can find it on the bottom of the case or in the computer's network connection properties. We will discuss this further below.

If you have no idea what we are talking about, what all these addresses and names are for, try reading the spoiler. For those who understand everything, skip the spoiler :).

Spoiler: In order for us to have the Internet, usually every house has a small box connected to the power grid. Antennas and several connectors or, as they say, ports can come out of it for connecting other devices (computer, laptop, TV, refrigerator, etc.) to the Internet. This box is called a router or router. The router is similar to modern smartphone: inside there is a processor, permanent and temporary memory, and even its own operating system. Have you thought about Android or iOS? No, and not even Windows. Typically, manufacturers create their systems using GNU Linux as a basis, adding the necessary functionality. The router system is often called firmware. A router is the first device in your home that accesses the Internet. It then in turn distributes it to the rest of your devices. Each device on the network has its own unique address. For a router this is usually 192.168.1.1. To access the router settings, you must go through authorization - this means entering the administrator login and password. Most often, the login is admin and the password is admin. Below is a table with the passwords of the main manufacturers.

Some companies set different login addresses and other logins and authorization passwords in routers. Yes, on Xiaomi devices The factory address is 192.168.31.1, and on routers from Mikrotik it is 192.168.88.1. Huawei also uses a different address from others – 192.168.100.1. If you don’t know the address or it has been changed to another one that does not correspond to the standard factory one, no problem. In the article we will tell you how to access the page of any router, modem or anything else.

How to access 192.168.1.1?

Take your device, which is already connected to the router via a network cable or Wi-Fi. Anything will do: computer, laptop, tablet, smartphone, refrigerator, etc. Open any one in it installed browser. Then in the line to enter the site address, enter 192.168.1.1 or thus http://192.168.1.1. The second option is even preferable. And press the Enter key.

If the device is connected to the router and you entered the address without errors, the authorization page for your router will open.

If instead a Yandex or Google search page opened, then most likely you entered 192.168.1.1 not in the address field, but in the search field.

Enter your username and password, then press the login button or the Enter key - and voila, we are on the router settings page. Some also call it web interface or Personal Area router, although these are not entirely correct terms, let’s not quibble.

For users Windows systems there is another simple and convenient way. Open the My Computer (This Computer) icon and go to the Network. And there you can see our router. By right-clicking on it, a small context window opens. Click on the View device web page item. As a result, a browser will open with the authorization page of our router and you do not need to enter the address manually.

Login to 192.168.1.1 with login and password (admin/admin)

It is important to understand that the router may not always require a login and password for authorization. This may be disabled in the settings. And if the router requires a login and password, these will not necessarily be standard factory ones. Perhaps they were changed when the router was connected or configured. Below is a list of standard passwords for various manufacturers.

If, unfortunately, you were unable to enter the settings from standard password, then you will have to reset the router settings to factory settings. But this is a topic for a separate article.

What to do if you can’t log into the router?

If the router page does not open, try the following solutions:

If nothing helps, then you probably need to reset the settings to factory settings or the router is completely faulty and requires repair by a specialist.

It is very difficult to imagine our life without the Internet; it is used every day and is the basis of our comfort. This is why a WiFi router (Dlink, Tplink, Zyxel, etc.) is the main one today network equipment, which is used in almost every home, apartment or office.

A Wi-Fi router makes it possible to turn a stable cable Internet connection into a convenient wireless communication, through which you can connect smartphones, tablets, TVs, laptops and any other devices. But before you get such a wireless connection, you need the correct one (or 192.168.0.1, depending on the router manufacturer and device model). This is quite simple to do and this procedure will not take much of your time, but for a beginner everything seems complicated and confusing. Correct setting The router helps if and solve problems with Wi-Fi connection.

How to log into a Wi-Fi router to configure the addresses 192.168.1.1 and 192.168.0.1 (admin admin).

Your WiFi router has its own firmware inside it, it has its own interface through which you can perform various manipulations with the settings. But initially you need to go to your router, see all these settings, and only then start changing their parameters.

In order to log into the router for initial setup you need to use a cable connection (LAN, Ethernet). For these purposes, a laptop with installed network adapter. So, in WAN port On the back panel of your router you need to connect an Ethernet cable (network) from your provider (as a rule, this port has a different color, yellow and is offset from the others).

If you live in apartment building, such a cable is brought directly into the apartment when connecting to the Internet and interactive (iptv) television. Along with the router, another network cable is sold, which you need to insert into the LAN port of your computer and one of the LAN ports on the back panel of the router.

After connecting the router to the computer, you need to go to the router settings. Any installed browser (Chrome, Yandex, Firefox, IE, etc.) is suitable for this. Open the browser and enter http://192.168.0.1 in the address bar (you can do it without http).

You can see which address is in your router in the instructions, on the sticker on the bottom of the router, or just try entering both of these addresses in the browser line. After you have entered the above address into the browser line and pressed Enter, you will be prompted to enter your username and password. If you see a window asking for a password, it means that all the previous steps were completed correctly, and you are already very close to your goal.

Everyone has WiFi routers The same login and password are used - admin/admin. You need to enter the value “admin” in the login line, and “admin” in the password line. After this, you will be taken to the router settings and can configure the Internet and settings Wi-Fi networks. The settings depend on the type of service provided by your provider.

Most of them provide automatic settings, so you should already have the Internet working right away through a cable connection. All you have to do is go to “Settings” wireless network", where you need to indicate what you want WiFi name network, security type and password. Now you can try connecting your laptop or smartphone to the wireless network. If it doesn't work, read on.

I can't log into the router using admin admin. 192.168.1.1 and 192.168.0.1 do not open.

You entered your username and password (admin admin), but were unable to log into the router, or were you denied access? This problem is quite common and you can solve it yourself.

Here are a few reasons why you may have difficulty logging into 192.168.1.1 or 192.168.0.1. Perhaps you have a used router (from a friend or acquaintances), which means that the previous owner could have set his own username and password to increase the level of security. Or you bought an exhibition copy in a store (from a display case), which was tested, repeatedly configured, and the standard password can also be changed.

It may also be that the router’s firmware simply crashed and does not correctly accept the information you entered. Don't be afraid, the problem can be solved. But before we start further actions, you need to make sure that you enter your login and password on the English keyboard layout and Caps Lock switched off.

The solution to this problem is very simple - you need to reset the router settings. To do this, you need to find the factory reset button on the back of your router. As a rule, it is small in size and recessed into the body, so it must be pressed with something thin (a paper clip, a pin, a toothpick). This is done so that you cannot accidentally press this button and reset all your previous settings.

Near the reset button, as a rule, the word “Reset” is indicated, but some manufacturers do not have this inscription. If you cannot find this button, then use the instructions for your router, in the section on resetting to factory settings, where its location will be indicated in detail.

In order to reset to factory settings and return the login and password to “admin/admin”, you need to disconnect all power cords, leaving only the power cable from the outlet. After this, you need to hold down the reset button for 10-15 seconds. You will see how all the indicators on the front panel of the router light up and go out, after which you can release the button, connect all the network cords and try to log into the router again (192.168.1.1, 192.168.0.1). The login and password will already be standard, as well as all the settings inside will be factory default.

As you can see, everything is very simple; you need to spend a few minutes to configure the router. Initially, you need to connect the router correctly, using the manufacturer’s recommendations, which are in the instructions. After that, go to the settings through the browser on your computer. Today, all manufacturers have a clear and simple interface for settings, so even a beginner can figure it out. If you have any questions, ask in the comments.

Setting up a modem or router is done through a web interface, which simplifies “communication” with the sometimes capricious hardware.

You can get to the router by typing in the browser; everyone who has ever configured a router knows what this simple address is.

However, if you just go to the router and enter according to the instructions required settings, then a connection to the Internet is not always established.

And it happens that after typing, the computer reports that it is impossible to connect, and in such a situation you have to postpone the instructions and turn on the logic.

We check and configure the Internet connection and Wi-Fi.

The first thing we need to check is, maybe we forgot to connect the computer and the router with a twisted pair cable? Then it is clear that there is no connection and it is impossible to connect. Also, an inexperienced user may confuse the connectors: on the router you need to select one of the LAN ports; the WAN port is not suitable for this.

If everything was done correctly, the indicator on the router corresponding to the corresponding LAN port will light up. However, there are situations when the router is turned on, connected to the computer by cable, but none of the ports come to life. In this case, everything is very sad: the problem lies in the router itself, it needs to be repaired.

We check the computer settings through admin admin addresses 192.168.0.1, 192.168.1.1.

In the properties of the network connection there should be checkboxes: get IP automatically, get address DNS server automatically. There should not be any network addresses there; if something remains from the previous settings, then because of this there may very well be problems with logging into the router. It happens that the “get an IP automatically” option doesn’t work, then you have to manually fill in the addresses, but you just need to do it correctly. In particular, you should indicate the router address in the line the default gateway and preferred DNS server.

Also, do not forget about your browser settings. If a proxy server is mentioned in the local network settings, then the computer and the router will probably not become friends. We'll turn it off at the same time. Windows firewall: There is no special protection from it, but it can interfere.

Here are actually two main directions in which you should look for the reason why such problems arose with setting up the router in the first place. You can still make a mistake if the router's address is not 192.168.1.1, but such a mistake is possible only when the user has not looked at the setup instructions. And sometimes the IP address is written on the router itself; you just need to examine the sticker glued to the bottom or side of the device. The password and login are often indicated there, usually admin and admin.

192.168.1.1 login and password can be found in this article, although if you don’t know how to set up a router ( home Internet) or you can’t access the router setup page 192.168.1.1/192.168.0.1 or the login/password doesn’t work? We will help you deal with certain problems in our article.

What is 192.168.1.1 or 192.168.0.1

The numbers provided are the network address or IP to enter the settings menu of your device; to get into it you need to use a browser. IP data is installed by default on most models from various companies network routers.

The numbers are entered into the address bar of any browser, after which a window pops up in which you need to enter your login and password. The default password and login is the word “admin”, after successful entry you will see the web menu interface. You can also log in to 192 168 1 1 using “admin” from another device that has a Wi-Fi receiver. Since there is no protection installed on it by default, all you need to do is connect to the network, and enter everything listed above through the browser on the device.

What to do if 192.168.1.1 does not open (inaccessible)?

— Problem with the browser
One of possible errors There may be a problem with the browser if the device detects the connected router. You need to install another browser and repeat the action of entering the menu. If this does not help, you need to check your browser for viruses and unwanted extensions.

— Problem with antivirus/firewall
The next error is the antivirus blocking the network address. It can be solved by disabling the firewall (protector against unwanted network traffic) for a while, or by adding the network address to the list of safe sites. The standard Windows firewall is disabled in the following way: control panel - system and security - firewall - disable windows defender. It is worth noting that this error is very rare.

— Problem with wire contacts or wi-fi network
If, when connecting to your PC via a standard cable, it is not detected, you should carefully check all connections and connection indicators on it. You also need to check that the Ethernet cable is connected correctly; perhaps the input was simply mixed up. The cable must be plugged into the socket, which is located separately from the others and highlighted in blue. If you are connected when Wi-Fi assistance receiver, you should check its serviceability, as well as the availability of drivers for its operation.

— Problem with the network card
This problem often occurs after installing a new operating system. In order to fix it, you will need to install the driver package that usually comes with the system unit. It is also important to check the Internet protocols used. To do this, you need to enter the network settings, click on “local network connections”, then properties, and here check the checkboxes next to protocol versions 6 (TCP/IPv6) and 4 (TCP/IPv4). All other fault options network card most likely due to a breakdown or incorrect connection. Ultimately, this may be a malfunction of the device itself, in which case it is necessary to contact a service center.

How to find out the login and password for 192.168.1.1 login?

As mentioned above, the standard password and login is the word “admin”. Sometimes this can be a combination of words, where the login is admin and the password is password. Most manufacturers indicate back side: network address, menu access data that is set by default.

You need to check the layout and correctness of data entry, then try changing the browser or device through which you log in. If all these steps do not help, then you need to reset the settings to standard. There is a hole in the back of the device that must be pressed with something thin (a paper clip or a needle) for 10 seconds or more. After this, everything will return to factory settings and you can enter the menu.

How to set or change the password 192.168.1.1

So, after successfully entering the menu, you need to find the Wireless-security section (wireless mode - protection), here you need to select WPA2-Personal protection and set a password that suits you, saving the changes.

What needs to be done in 192.168.1.1 to set up the Internet?

In the web interface, you need to select the network-wan section, then fill out the fields in this section as follows:

• In most cases, the connection type should be left as default, or you should set the settings for your country.
• In the username and password column, enter the data from your agreement with the provider.

In the “wireless mode” section you can set the name of your network, set protection, find out the number of users connected to this moment. Many of the items that are regulated automatically can be left as default. Most routers have quick setup- this means that all the parameters that need to be configured will pop up in a special window, you just have to fill them out. You can also take advantage of the help of a specialist who will install and configure it himself in the shortest possible time.