Standard Windows 8 password. What to do if you have lost your Windows administrator password. To your Microsoft account

Nowadays, there are practically no fundamental means of protecting against hacking computer devices and gaining access to the user’s personal confidential information.

Setting an administrator password is also not very effective in protecting your computer, since there are at least several ways to hack and bypass it.

Hack the Administrator's password and log in using his account - easily and effortlessly

What these methods are will be discussed in this article.

Tip 1. Reset your password using the Command Interpreter in Windows

To do this, we sequentially perform the following steps:

Click “Start” and select “All Programs”;
in the tabs that open, click “Standard” and literally in the first lines of the list we see the “Run” option;
in the “Run” command line, enter “cmd” and “Ok”;
In the “Run” command line we write “cmd”
A Command Interpreter window opens in front of us, into which we write the command “control userpasswords2”, then press “Enter;
In the Command Interpreter window, enter the command “control userpasswords2” and click “OK”
“User Accounts” appears on the screen – in the “Users” field, select the account we need;
In the “Users” field, select the account we need
uncheck the option “Require username and password”, then “Apply” and “Ok”;
Uncheck the “Require username and password” checkbox
in the “Automatic login” window that opens, enter and confirm the password or leave these fields empty, click “Ok”, “Ok” again;
In the “Automatic login” window that appears, enter a password or leave the field empty.
close the window command line and reboot our computer.

Tip 2. Reset the password for the Administrator account in Safe Mode

To reset the built-in “Administrator” account, we proceed step by step according to the instructions below.

Step 1. Restart the computer and press the F8 key while loading.

Step 2. In the menu that appears, we are asked to select one of additional options downloads operating system Windows – select “Safe Mode”.

Step 3. Next, log in to the system using the built-in Administrator account, which usually does not have a password by default. To do this, enter “Administrator” or the same word in Russian in the login field. Leave the password field blank and just press “Enter.”

In safe mode, select the non-password-protected built-in Administrator account

Step 4: A window will appear warning you that Windows is in Safe Mode, click confirmation “Yes”.

Click “Yes” to continue working in Safe Mode

Step 5. We start working in security mode - as soon as the desktop loads, click the following sequence of options:

Start –> Control Panel –> User Accounts

In Safe Mode, select “User Accounts”

Step 6. Place the cursor over the user name whose password you need to edit or reset, and click on this account icon.

Step 7. In the menu that appears on the left, select the “Change Password” item, enter a new password and confirm it. If we are simply resetting the password, then we leave this field empty.

In the menu on the left, select the “Change Password” option, then enter a new password and then confirm it

Step 8. Click the “Change Password” button.

Step 9. First close the “User Accounts” window, then the “Control Panel” window.

Step 10. Reboot the computer.

Tip 3. How to reset the password for the built-in Administrator account

This advice will be useful to those who are faced with a problem when the built-in account is protected by a password, which we, of course, conveniently forgot. So, we act according to the instructions below:

We need a CD (or flash drive) with a set of resuscitation programs for Windows recovery, which we insert into the drive, after which we restart our computer.
A recovery disk is ideal for system recovery.
When starting the computer, enter the BIOS by pressing the “Dilete” key.
In the BIOS, we change the installation priority and assign the computer to boot from the CD-ROM. Next we place our boot disk with the operating system into the drive and reboot the PC.
After the computer boots from the CD-ROM, the recovery disk menu appears on the screen, in which we select the edited copy of Windows and go to “System Restore”.
In editable copies of Windows select “System Restore”
Next, in the dialog settings of this window, click “Command Line”.
In the command field that opens, enter “regedit” and confirm the command with the Enter key.
Find and select the HKEY_LOCAL_MACHINE section, and select File from the menu, and then Load hive.
We need to open the SAM file, then select the section HKEY_LOCAL_MACHINE\hive_name\SAM\Domains\Account\Users\000001F4, then double-click on the F key and go to the very first value in line 038 - the number 11, as shown in the photo.
Select HKEY_LOCAL_MACHINE.. and double-click on the F key
We replace this number with the number 10, while being very careful, since only this number needs to be changed; other values are strictly prohibited from being touched.
We replace this number “11” with the number “10”
In the same section HKEY_LOCAL_MACHINE\hive_name\SAM\Domains\Account\Users\000001F4, select the File menu, then Load hive and then “Yes” - confirm the unloading of the hive.
Select the menu File - Load hive and confirm unloading the hive
Now we close the registry editor, as well as the entire installation process, take out our disk and reboot the computer.

Hack the Administrator password in Windows 8

The Windows 8 operating system has its own simple way to reset the Administrator password. All you need to do to do this is follow the steps below:

Step 1. Go to the “System Restore” section, and then the “Diagnostics” console, where we select the “ Extra options».

Copy the file “sethc.exe” to avoid losing it

Step 3. Now on the command line we write the following:

copy c:\windows\System32\cmd.exe c:\windows\System32\sethc.exe, that is, instead of “sethc.exe” we enter “cmd.exe”.

Replace the file “sethc.exe” with “cmd.exe”

Step 4. Exit the command console using the “exit” command.

Step 5. Reboot our computer and boot with the usual parameters.

Step 6. Press the “Shift” key five times to launch the command line.

Step 7. Enter in command console“lusrmgr.msc” and see the administrator’s name.

Enter “lusrmgr.msc” into the command console and see the administrator’s name

Note: if the account is disabled, it can be activated using the command " net user"Admin_name" /active:yes"

Step 8. Set a new password - type the command “net user “Administrator name” password”.

It should be noted that this method equally suitable for more earlier versions operating systems.

In these simple ways you can reset the administrator password on a computer and laptop in Windows 7, 8 and 10 operating systems.

Useful video on the topic

The videos below will clearly demonstrate how you can also hack the Administrator password.

Reset the Administrator password in Windows 7 using a small program

How to reset your Windows 8 login password

Resetting the Administrator password in Windows 10

Microsoft is very committed to protecting the security of its customers' personal information. You have the ability to protect your account with a password (text or picture) so that unauthorized people cannot log into it. However, what should a user do if he has forgotten his access code for his account? In this case, you need to know how to reset the password in Windows 8.

Local account and Microsoft account

The first thing you should find out before you begin password recovery is the type of account. Unlike previous versions, to authorize in Windows 8, users can use either a local account or a general account from Microsoft.

Depending on what type of account the user forgot, the action algorithm changes. For example, it is unlikely that you can reset the code for a Microsoft account using third party programs. But a convenient recovery form is available on the developer’s website.

Try to remember how you logged into the system before. If you used the address as your login Email or phone number, most likely you need to restore your account Microsoft records.

Note! If you have forgotten your Windows 8 administrator password, use the methods described for local accounts.

Microsoft website

If you used a general account for Microsoft products, you can easily reset your password through a special form on the website. For this you can use any other Personal Computer, laptop or even smartphone (not necessarily with the Windows operating system). If you need to reset someone else’s password, you need access to mailbox or mobile phone user.

The process is very simple:

Choose any option convenient for you. The new code will be sent with an email or SMS message. There is also a recovery option for those users who do not have access to mail or mobile. Click on the "I can't use any of these options" hyperlink.

Here you will need to indicate a new mailing address where you can be contacted, as well as fill out the maximum number of fields with personal information. Your application will be verified by the administration within 24 hours.

Password reset program

There are quite a large number of applications with which you can guess the password for a local user account, reset it, or simply disable verification.

To use such utilities you will need to create bootable USB flash drive. Distributions of some programs include tools for working with ISO way. For others, you will have to use specialized software, for example, UltraISO.

For example, you can use the universal utility ERD Commander MS DaRT. This is a whole set of applications for restoring and diagnosing operating systems from Microsoft. You can also use it to reset your password.

Recovery disk

If we do not have the opportunity to create a bootable USB flash drive on another device, but still have an installation DVD or recovery disk, you can use alternative way. It is a little more complicated than the previous one.

Try to follow all instructions correctly and do not do anything unnecessary - this may disrupt the normal operation of the operating system.

Thus, you have replaced the "Ease of Access Center" call on the Welcome screen with the system console.

Password reset

When the system boots, select the user account whose password you forgot. Press "Control" + "U" to bring up the Command Prompt (instead of the standard Accessibility Center).

Now you can use the usual command to change your password. Enter “net user *username* *password*” and press Enter. Log in with a new password.

Launch the command line and use the command "copy c:\ c:\windows\system32\utilman.exe" to restore normal system operation.

Our computer is a real warehouse of various data, which is sometimes very important and inaccessible to the public. Let's put aside situations where computers are hacked by hackers and information is stolen. We are considering a situation where the user forgets his password and does not know what to do about it. Yes, there are a lot of such situations. And not everyone knows how to fix or solve this problem. Just imagine that a database of your clients or a report for the year is stored on your computer, perhaps just yesterday you saved it to your computer thesis and you have to submit it tomorrow, however, you forgot your password and are starting to slowly panic because of Therefore, we will talk about how to reset the Windows 8 password (the modern operating system that is installed by most users). In this article, you can gain knowledge and recommendations that will allow you not only to understand the entire process, but also to save yourself from trouble.

Why do you need a password?

But first, you should figure out whether you need a password at all? As we said above, sometimes there may be various data stored on your computer that should not be accessible to third parties. Sometimes there may be data that needs to be preserved and isolated from deletion. For example, if you have children in the house, they will definitely use the computer and constantly break it a little. They can delete data or change it; there are many situations that can be described. Therefore, to avoid such trouble, you must have a password for protection. But it happens that the password is forgotten, and you need to recover it urgently. Therefore, it is imperative to know how to reset the Windows 8 password. And as soon as such a problem arises, you can instantly fix the situation and no longer worry about whether you wrote down the password.

What to do if your password is forgotten?

But if you still forgot your profile login information, then you should prepare for a little training. Resetting a password is a procedure that allows you to bypass the protection on your computer and be able to use it. Of course, we can also consider the inappropriate use of such a method, but what can we do, we definitely cannot completely exclude such a possibility. The new Windows 8 operating system is good because it has a unique recovery system that allows you to reset your password in several ways. Resetting your password can be done by manipulating your profiles in Windows, and the second involves using a licensed installation disk or flash drive.

Types of account in Windows 8

Is there a Windows 8 password reset program? Yes, it exists, but we’ll talk about it a little later, first it’s worth looking at standard methods implementation of access restoration. So, above we clarified that there are several profiles in Windows 8. One of them is called local (gives access to the system by activating the check of local data, that is, those that were created without an Internet profile). The second profile is a Microsoft account. This is already full-fledged data that was registered by creating an Internet profile. Each of them has features in its recovery that must be taken into account, otherwise it will simply not be possible to reset the Windows 8 password.

How do I reset my local account password?

So, above we indicated that a local password is an account that was created personally and without taking into account the Internet profile. Therefore, to recover this type of account, you must use a simple disk Windows installations. To do this, you need to insert the disc into the drive and restart the computer. Then in the installation menu you need to agree to the operation of the disk and select the “System Restore” - “Diagnostics” menu. As soon as a new window appears, you need to go to “Advanced options” and launch the command line. In it you will need to enter several commands one by one, after each one you must press Enter:

"copy c:\windows\system32\utilman.exe c:\";
“copy c:\windows\system32\cmd.exe c:\windows\system32\utilman.exe” (if a warning about replacing files appears, you must agree).

After these steps, you need to restart the computer and remove the disk (or flash drive, depending on what media you have the operating system on), so that the next time you start your computer, it will start without using third-party memory objects. When the loading screen reappears, you will notice changes, that is, new additional options will appear. You need to go to the menu " Special abilities» and press the key combination «Windows+U». These steps will allow you to use the command line, where you need to enter the command “net_user” and from the list of accounts that appears, select the one you used. If for some reason error 8646 appears, then it means you are using an Internet profile, and you need to reset your Windows 8 password in another way. The next option assumes the presence of the Internet and the data that was specified during registration of the copy by the operating system. If you don’t have any of this, then you should contact the service specialists.

How to reset your internet profile password?

If you used the Microsoft website to set a password on Windows, then neither the Windows 8 password reset disk nor flash drive will help you, since you need to request a password change on the official Microsoft website.

The procedure is simple; just request and receive a letter, which will help you avoid this unpleasant situation. So, to recover, select the “forgot password” option and agree with the responsibility that rests with you. After this, a window will appear with possible options receiving a password. You must select the “Email me a reset link” item, since this option will allow you to receive an email either with a link to the change or with the security question that you specified during registration. After going through all these nuances, the letter will be received and the password will be changed, which will allow you to continue using the computer without hindrance.

Flash drive as a recovery tool

It is worth considering that due to the peculiarities of modern technologies, the Windows 8 password reset disk can be considered outdated version and not work, therefore, in order to avoid getting into this unpleasant situation, you must always have a flash drive with you. Microsoft's policy has decided to switch to these more convenient media, so if you bought Windows separately, then, in fact, you should have such a flash drive. If you received an assembled computer, then you probably have a disk with a licensed copy. But even in this situation, getting rid of the disk is not so difficult, you just need to write all the data from the media to any convenient flash drive with the Boot option (this option is set in the recording settings, it allows the media to launch smoothly in the boot screen).

Floppy disk - obsolete option

There is also a situation where Windows 8 is recommended as the main way to achieve a positive result. It is worth considering that technological progress has reached incredible heights, and now the floppy disk is not used at all. Yes, you may have come across such material and the carriers themselves. But it is also worth taking into account the modernity of computers, which practically no longer identify this kind of device. Therefore, floppy disks have been replaced by more advanced flash drives, which easily make it possible to get rid of the password problem that has arisen.

Password cracking program

Here, in fact, we come to the very interesting moment our discussion, which will explain how to obtain information about a unique program that allows you to reset a password on any computer without additional data and equipment.

Resetting the Windows 8 administrator password is done by using a program called Online NT Password & Registry Editor. First you need to download it, and then burn a flash drive, which is not bootable. This can be done using the WinSetupFromUSB program. Once you have created the required flash drive, it's time to reboot your computer and set the priority USB boot. This can be done in Bios in the “Boot” menu by setting USB number 1 in the “Boot Device Propriety” option. After this, you need to restart the computer again.

Next time booting Windows A window will appear with various options, you don’t need to select anything, just press Enter. In the second window with options, you must indicate on what media the operating system is installed. They are listed under “Possible Windows” - select the required number and wait a few minutes. It's time to start actively cracking the password, to do this, go to the “Password reset” menu and press Enter. This will take you to a window where you can edit your protection data. It lists all accounts that are used on this computer. Select the required profile and press Enter. In the next window you need to select the “Clear user password” option - that’s it, the password will be reset successfully. You will be returned to the initial window where you need to press Q and restart your computer (don't forget to set offline boot from hard drive, removing priority from the flash drive).

Recovery using Windows Disk

If you don’t want to tinker too much with the nuances and recommendations, there is a radical way to reset your password, which consists of the usual reinstalling Windows. But it is worth considering that this method is only suitable if you are using a local profile. In the case of an Internet profile, you will not be able to get rid of the password, since online registration will require previously entered data. In other cases, you can safely reinstall the operating system; there is no need to worry about the data, it will all be saved (if you do not use formatting). True, you will have to reinstall some programs, but this is no longer such a big problem.

Standard way to reset your password

For Windows 8, resetting a user password is already a serious problem, since, based on experience with previous operating systems, the developers took into account the presence of a huge number of users who forgot their password and had to recover it. Therefore, they did not get lost and developed an interesting utility in this system. "Windows 8 Password Reset Wizard" - that's what it's called. To get it, you need to go to Start - Control Panel and select the “User Accounts” option. After this, you need to select the menu “Create a password reset disk” and write the resulting file to a flash drive. After this, you can boot the computer along with the flash drive and notice that an additional “Reset” option has appeared in the password entry menu, which, in fact, will allow you to restore access to the system. It’s just worth considering that this method works exclusively with a local account.

How to avoid this unpleasant situation?

That, in fact, is all you need to know about the recovery procedure. A decent amount of information, isn't it? Therefore, in order not to torment yourself and be able to easily log into the system, do not forget to write down the password on paper and hide it in the most secure place, where you can definitely look if the need arises. Either create a password that you always use in conversations or keep in memory. Only with a specific and collected approach to this matter will you never forget your password or lose access to the system.

How to reset your password on Windows 8 - this actual topic to date. This operating system has a high level of security, and a password is required when installing it. But there are often cases where users simply forget the key and cannot log into the system. Moreover, a password may also be required to perform certain operations, such as and so on.

What should I do if I forgot my login password, but the system requires it? Exist different ways resetting it. We will look at the simplest and fastest option on how to reset your Windows 8 login password, which anyone can handle. In this case, you do not have to wait long or.

How to reset your account login password in Windows 8

First of all, it should be noted that we do not need any third party applications. We will do everything using the built-in utilities of the Windows 8 operating system. But, before moving directly to solving the task at hand, it is necessary to prepare. How to make it?

First we need a regular flash drive. Volume of at least 2 GB. We connect the drive to the computer and launch the control panel. IN top corner service has a search bar in which you need to write “Recovery”. Open the tool. Not to be confused with the recovery utility Windows files 7, since in the latter case you can only create a CDDVD disc, but we need a flash drive.

So, the Recovery tool allows us to create bootable portable memory drives (Flash). To do this, click “Create a recovery disk.” We confirm the action. Next, a window will appear with information about the flash drive being created and what it can be used for. A little lower, you need to uncheck the “Copy recovery partition” checkbox. As a rule, it is not active, but in some cases it must be removed (if it is installed). Click “Next”.

The next step is choosing a memory drive. Here you should select our flash drive. Click “Next”. The system warns us that all data on the drive will be deleted. Click “Create”.

It is recommended to always have such a flash drive, since in case of any problems it will help solve the problem as quickly as possible. At this point the preparation stage is completed. It is worth noting that you can make such a flash drive on any computer with Windows 8. Now let’s move on to how to reset your password in Windows 8.

Resetting your login key

Now we have a bootable USB flash drive. To reset Windows password 8, you should boot your computer from it. If you have a desktop PC, then you need to set it to boot from a flash drive. If you are using a laptop, then everything is simpler. When the system boots, press the "Esc" key. After this, a window for selecting actions will appear. We are interested in the “Boot devise” section. The device selection key may differ depending on the laptop model. This could be F2, F8, F9, F10, F11 or F12. When you click on the corresponding button, a list of devices from which you can download will appear.

We boot from our flash drive and select the “Diagnostics” section. Next, open additional options and select “Command Prompt”. So we launched another Windows tool, which is necessary to reset the key. Next we will need to enter certain commands.

Working on the command line

The main thing is to be extremely careful, since the slightest typo in a command makes it invalid. So, next you need to enter the following commands, in the same sequence as they are written:

Diskpart – allows you to start working with disk partitions.
List vol – this command is executed to display the available partitions on the hard drive. In addition, thanks to it we will determine which partition the operating system is installed on.
Exit – exit from working with the hard drive.

Now, knowing which partition the OS is installed on, you can move on to the next step. It is worth noting that to execute the command you must press “Enter” each time. That is, we do this after each line (each written command). So, now we write the following:

Above we learned the letter of the partition on which the OS is installed. Now we write the following command – C: and press “Enter”. "C" is the drive on which Windows is installed. For you this may be a different section, then instead of “C” write the letter that corresponds system disk. It means that further actions will concern exactly the specified volume.
Cd windows – enter the directory with the operating system.
Cd system32 – open the subdirectory containing the files we need.
Copy cmd.exe cmd.exe.original – copying files.
Copy utilman.exe utilman.exe.original.
Del utilman.exe – file deletion.
Ren cmd.exe utilman.exe. renaming the file.
Shutdown –r –t 00 – command to reboot the system.

The above commands perform the actions of replacing a specific system file. Why is this necessary? When loading Windows 8, in the menu where we must enter the password, there is a “Accessibility” button at the bottom. When you click on it, additional options appear. However, we replaced the file that is responsible for the functions of this button, and now when we press it, we launch a command line in which we can perform actions to change the password. So, let's move on to the next stage.

How to set and remove a password when logging into Windows 8: Video

Changing the login password on the command line

So, as you remember, the last command rebooted the PC. Now, when loading, we are taken to a menu where we are asked to enter a password. There is an Accessibility button in the lower left corner. Click on it. If the above commands were written correctly, a command line will open where you can reset your password in Windows 8. To do this, enter the following commands:

Net user Andrey * – this command allows you to make changes to the account of a specific user. Here, instead of “Andrey”, you should enter the name of your account. It is worth noting that this name must be written in the language in which it is indicated in the system. The command line supports the Russian language, so if your account name is written in Cyrillic, then write it that way.
Now you should enter a new password and press “Enter”. It will not appear as you type, so be extremely careful. It is best to first enter a simple key, which can later be changed in the account settings.
After entering the key, you will need to enter it again for confirmation. Press "Enter".
Now we execute the “Exit” command.

After the completed operations, you can freely log into your account by entering a new password. We have discussed with you one of the simplest ways to reset your password in Windows 8 if you cannot log into your account. It is worth noting that our data was not damaged, and we did not have to reinstall or restore anything.

How to reset your password on Windows 8: Video

Now all that remains is to perform the steps that will return the Accessibility button to its original functions. To do this, we boot from the flash drive again. Open “Diagnostics”, then “Advanced options”. Next, launch the command line. We write the following commands:

C: — Here again, instead of “C,” we indicate the letter of the partition on which the operating system is installed.
Cd windows.
CD system32.
Del utilman.exe.
Ren utilman.exe.original utilman.exe.
Ren cmd.exe.original cmd.exe.
Shutdown –r –t 00.

That's all. We've changed the password and returned the Accessibility button to its original functionality. It is worth noting that if you do not use it, then the purpose of launching the command line when you press it can be left. This will not affect the operation of the system in any way.

How to remove a password in Windows 8: Video

How to disable password in Windows 10: Video

Even the most avid Windows 8 fans can be confused by the situation when a user has forgotten his password to log into the system. It turns out that to solve this problem, it is not at all necessary to carry the computer to service center and pay money for help. You can reset Windows 8 (and at the same time remove the password) yourself by adopting two simple ways.

Updated:

New way to reset everyone's password Windows versions read in our.

What to do if you forgot your Windows 8 password

Method one- only using Windows 8 itself. So, you can reset the password in Windows 8, but you should take into account the fact that when you reset the password, all personal data from the computer (documents, photos, etc.) stored on it will be deleted , including separately installed programs.

1. First of all, make sure that the computer is plugged in and do not turn it off during the reset procedure.

2. On the Windows 8 login screen, click on the power icon in the lower right corner of the screen. A pop-up menu will appear on the screen.

3. Then press and hold the Shift key while clicking the “Reboot” menu item in the drop-down menu.

4. A new menu “Select an action” will appear on the screen. Here you need to go to the “Diagnostics” section by clicking on it with the mouse

5. In the menu that opens, click “Return to original state.”

7. In case the computer is not inserted installation disk, the system will require you to use it to complete the recovery.

8. After a few minutes, you need to click “Just delete my files” in the menu that appears.
By following these steps you will get back Windows system 8 to the state of completion of installation on the computer, and you will need to re-create a user on the computer, as well as personalize the desktop and necessary programs on computer.

Method two- using a password reset program.

To reset your password, you will need to create a bootable USB flash drive and delete the password using it.

Create a bootable USB flash drive (all data on the flash drive will be destroyed), To do this, download the program and image:

Unpack the contents and run the file rufus_v1.4.1

IN open window program, click on the disk icon, select the image in the unpacked folder called BootPass and press the start button.

We are waiting for the bootable flash drive to be created.

Now we insert the USB flash drive to reset the password into the password-protected computer and select “boot from USB” when booting. ( When booting your computer, press F10, F12 Esc depending on your computer model)

After rebooting the password was gone.))