In front of you detailed step-by-step instruction about how to flash a Beeline M2 tablet. Our editors have chosen the most suitable method for flashing this Beeline model. If this instruction will not give results try flashing using another method: TWRP Recovery, ROM Manager, Fastboot or classic OTA.
Warning! After flashing the device, all your data from internal memory- will be erased, so to save your contacts, settings and applications, first save all data from your tablet.
System installation method CWM Recovery 1. Charge the flashed tablet at least 80%. 2. We save all data that cannot be lost from a flash drive, SIM card and tablet memory. The SIM card (if any) can be removed. 3. We place the necessary firmware in the tablet’s memory. The firmware file must be in archive format zip. You can select and download the firmware. 4. All Beeline tablets have Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do this according to the following instructions: Install the application from Google Play on your tablet. Launch it and provide Root rights. .
In the list of options, select “CWM Recovery”. 
Then the application will show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for taps on the screen and the classic version (controlled by the volume and power buttons). 
You will be prompted to download. Click Yes. 
Then the CWM Recovery image for the tablet will begin downloading. 
A notification will appear that the firmware was successful and you now have a modified recovery installed. We immediately go into it, to do this, click “Yes”. 
Ready. If you have already installed ClockworkMod Recovery, then simply enter it by pressing for 3-5 seconds any of the combinations: - Volume up + power button - Volume down + power button - Volume up/down + power button + "Home" - Volume up + volume down + power button 5.
Movement in the Recovery menu is carried out using the volume buttons, and confirmation of the choice with the power button. Before installing the firmware, you must first do a factory reset. Therefore, select the item in the menu wipe data/factory reset.
6.
Next, simply confirm that you agree to reset: Yes – Wipe all user data.
7.
Now in the main menu of Recovery select install zip.
8.
After that select Choose zip from /sdcard.
9.
Navigate to the folder where you saved the firmware zip file and select it. 
10.
A confirmation message will appear. Select Yes – Install....
11.
The firmware installation process will begin and at the end the message will appear Install from sdcard complete.
The firmware is finished. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.
12.
Ready. The tablet will start loading from the already installed firmware. Other materials
After the first appearance of the tablet on the computer device market, less than a year passed before the Tablet PC became an independent unit. Global brands like Samsung and Apple are trying to capture as large a share of the market as possible. And some companies that have a little less reputation rise with small but confident steps to the Olympus of greatness. And now the Russian cellular company Beeline, together with ZTE, have released the first branded Beeline tablet.
This is one of the most inexpensive tablet computers on the Russian market. For a fairly symbolic price, the buyer receives a fully functional tablet in the operating room Android system version 2.1, which can be updated to a newer one, instructions will be attached at the end of the article.
Placement of functional connectors and buttons on the tablet:
- On/off and standby button;
- Volume setting;
- Screen;
- Headphone jack;
- Light sensor;
- Built-in speaker;
- Indicator;
- Home button;
- "Menu" button;
- Return button;
- Removable cover;
- Camera;
- Speaker;
- Charging connector;
- Built-in microphone.
As a rule, a branded Beeline M2 tablet has appropriate packaging, on which you can find an image of the tablet itself, its name, the company’s color gram and some technical characteristics.
The equipment, as usual for similar tablets, is the same: the tablet itself, a device for charging the tablet, USB cable for synchronization with computers, headphones, warranty card, instruction manual and installed card 2GB memory.
Specifications
Technical parameters of the beeline tablet are standard for similar tablets with pre-installed Android version 2.1. Seven-inch touch screen with a resolution of 800x480 pixels. Equipped with a single core processor clock frequency 600 MHz, RAM, like the internal one, is 512 MB. It has built-in modules: Wi-Fi, 3G, Bluetooth; in addition, a compass, GPS, FM, and proximity sensor are installed. It has two cameras, front and rear, 0.3 megapixel and 3.2 with autofocus, but without flash.
With normal and moderate use, the battery lasts for the entire working day, but if you watch videos and surf the Internet all the time, it will last for 4-6 hours, depending on the settings. With a weight of 402 grams and dimensions of 192x110x12.6 millimeters, it lies very comfortably in the hands.
Tablet settings
Here are the most used applications, such as telephone communications, SMS messages, contacts, applications, settings, browser. You can also find out the exact time and date, view device connections via USB, Internet connections via 3G or Wi-Fi.
So this device is branded, so initially only Beeline cards work on it, but you can unlock it if you wish this function. Therefore, we will consider the stages of installing Beeline Internet for a tablet.
In order to go to the main application menu, you need to click the “Applications” shortcut on the desktop, which will open this menu. As you can see, the tablet already has a number of pre-installed programs for convenient use at the initial stage of operation.
Now we need to go to the settings, so you should find the “Settings” shortcut on the desktop or in the list of applications at your discretion.
Since we are now going to look at how to connect the tablet to the Internet via a Beeline SIM card, before doing this you need to insert the SIM card into the appropriate slot.
To begin with, as shown in the picture, we remove back cover. The main thing is to be careful not to damage the fastening system.
As shown in the picture above, we insert the SIM card, next to it there is a slot for a memory card.
After inserting the SIM card, turn on the device and go to settings mobile internet from Beeline. Find the “Settings” shortcut in the list of applications, click and wait for the settings window to appear.
Let's go to wireless network, Unfortunately, GUI menu and operating system may be different on your device - it all depends on the version of the OS that is installed on the device.
Let's move on to Mobile networks to create a new mobile Internet point
Be sure to turn on “Data transfer”, you can choose to turn on “Internet roaming”, then you will have to constantly monitor the traffic. Press and hold “Access Point” or press the “Functions ()” button on the tablet and click create a new point, where you will need to fill in the appropriate fields:
APN: internet.beeline.ru
Username: beeline
Password: beeline
After that, click on the “Functions” button again, Save all settings and reboot the device. This completes the instructions on how to set up an Internet Beeline on a tablet.
It is important to know that if you are not satisfied with the Internet data, you can service center unlock the feature on others mobile operators, as mentioned above.
To make a call from your tablet, you need to go to the “Phone” program and turn it on.
As you can see, the usual dialing window opens in front of us; I hope everyone knows how to use phones. There is nothing difficult about dialing a number and pressing the “Call” button.
Sending a message with tablet computer Beeline is also very easy to implement.
In the list of applications or on the desktop, find the “Messages” application, click on it and in the window that appears, select create a new message, then enter the phone number to whom you want to send the message. To enter a message, click on the “Text Entry” field.
Installing new firmware on the tablet
Instructions
- Now we connect the tablet itself via USB to the computer.
- Next in automatic mode The installation of the appropriate drivers on the tablet will begin.
- After installation, a message will appear in the notification area.
- In the firmware program, the “Launch Firmware” button will become active; click on it and wait for the installation to complete.
- After successfully updating the device, a message will appear in the program, click “Ok”, disconnect the tablet, remove the battery, insert it back, and turn on the device again using the Power button.
In addition, we can say that this software is not recommended to be installed on other devices, since the consequences can be very diverse.
Also, before purchasing, you should search for Beeline M2 tablet reviews in order to fully know all the pros and cons of this tablet. Find out what problems occur during operation, what shortcomings during assembly and everything else. Since it is difficult to fit all the most necessary and useful things into one review.
Finally, we can say that for that kind of money you can buy better tablet, but the fact that it is the first Russian brand is already a plus for the manufacturer.
A short video review of the Beeline Tablet M2:
28.07.2011, 14:14
Hello.
I was thinking about installing a tablet like a karpk in Logan, so I’m wondering whether the most affordable tablet for me, the Beeline M2, will suit me and whether it will be enough for me.
What do you need
Navigation
Video recorder
Rear View Camera
Who can say anything about this tablet price 9900 characteristics http://shop.beeline.ru/msk/gadget/planshety_bilajn
28.07.2011, 14:38
Percent is weak old version android. Video registration is still difficult to install; it’s better to use a stationary recorder.
29.07.2011, 15:33
I have such a percentage in my phone.. sometimes the graphics touches (surprises) due to the 3D accelerator.. but Navi + music from the phone - as a rule, leads to the closing of Navi.. I would advise looking towards the Chinese - the price is cheaper - the performance is greater. .
30.07.2011, 01:47
Thank you, I already bought this Beeline M2.
I don’t know, it seemed like a pretty nimble device to me. The Navigator has already installed a program for a video recorder based on the built-in camera, and there are no brakes in the joint operation of these programs, even the Navigator works faster than in a PDA.
I tried the film in avi 700mb and shows it without any brakes, although I had to install the player.
In general, I liked the device, the screen reacts well, faster than the Monique Lilliputian, there were no brakes yet, the only thing I didn’t like was the additional touch keys, sometimes my finger gets on them, mechanical ones are better.
If anyone has any questions about this device, I’m always happy to answer.
Video registration is still difficult to install; it’s better to use a stationary recorder.
I don’t know, I managed everything with the program. Now I'm wondering how to attach the rear view camera?
I have such a percentage in my phone.. sometimes the graphics touches (surprises) due to the 3D accelerator.. but Navi + music from the phone - as a rule, leads to the closing of Navi.. I would advise looking towards the Chinese - the price is cheaper - the performance is greater. .
Chinese! Well, I don’t know, I was embarrassed to buy a phone made by them, there was no guarantee, no certification, nothing. Here, although it’s China too, it’s a ZTE company and everything is included, including 3G and GPS.
And another question about Android, I can’t find how to remove the screen lock after startup?
06.08.2011, 01:26
old version of android.
By the way, it’s easy to update to 2.3.4:acute:
07.08.2011, 03:24
Disable blocking
http://www.appbrain.com/app/org.jraf.android.nolock
10.09.2011, 11:27
Updated the firmware to 2.3.5, the device has become noticeably faster, it is indicated that USB Host should work, has not checked yet, no adapter
16.09.2011, 20:27
18.09.2011, 13:01
avgaz! I also put this tablet in the car, everything is fine, but it lacks USB Host, how are things going with it after flashing it to 2.3.5? and tell me how I flashed it, preferably step by step with links indicating where to download it from and where to install it, I’m afraid to make a brick when flashing it.
USB Host works fine, if you don’t take into account that I haven’t been able to attach a webcam to it yet, flash drives, mice, and keyboards are great.
You need to flash it on the latest 2.3.5 only the host works there, link to the firmware (http://vtablet.rf/topic/77-recovery-%d0%be%d0%b1%d0%bd%d0%be%d0%b2 %d0%bb%d0%b5%d0%bd%d 0%b8%d0%b5-%d0%be%d1%82-19082011/)
First you need to flash it to 2.2 or 2.3.5 via the flasher, then update to the latest one from 08/19/2011 from a flash drive, how to flash it here (http://vtablet.rf/forum/48-zte-v9-light/)
Next you need to jews the wiring itself, that is, cut the plug micro usb and there solder an empty contact and black describes how to do it here (http://vtablet.rf/topic/18-%d0%b2%d0%be%d0%bf%d1%80%d0%be%d1%81%d1 %8b-%d0%b8-%d0%bf%d1%80%d0%be%d0%b1%d0%bb%d0%b5%d0%bc%d1%8b-zte-v9-light/)
Then he’ll buy a hub with external power and be happy. Of course, you can not solder the wiring, but order it on ebay; while I was waiting for the order, I soldered it myself, spending three wires for practice :).
It seems that in any case, flash to 2.3.5, the difference with 2.1 and 2.2 is very noticeable, especially if used in a car.
