Today, I think we need to devote time to the question of how to close the program. Of course, many will think it’s as simple as just clicking the “Close” button. But everything is not always so simple, especially if the program itself is frozen and does not respond to any commands. But such situations are not enough powerful computers happen quite often and if the user does not know what to do, they usually do it the old fashioned way - reboot the computer. But, this kind of reboot should be used only in extreme cases, otherwise you can say goodbye to all the information on the computer. Therefore, we carefully read the article, learn and remember. Everything is done quite simply, but let's look at all the ways to close the program; in fact, there are not very many of them.

How to close the program?
1 way. Almost always, in the right top corner any window or program has a close button:

All programs are written by people, which means they are not perfect and may crash. , which is frozen? In general, the developers did a great job in Windows 7/10. In these operating systems, programs began to freeze much less often and it became easier to close such programs. In Windows XP, I had to restart my computer much more often because programs would freeze.

Let's look at all the available methods on how to close a program that has frozen, with specific examples, and learn how to avoid such problems.

How can you tell if a program is frozen?

Usually the program stops responding to user actions, and the cursor turns into an hourglass. In this case, the program title may say “(Not responding)” in parentheses. All attempts to close the program with a “cross” do not yield anything, or the cross cannot be pressed. You also need to understand that resource-intensive operations require execution time. That is, if you “loaded” the entire computer with something heavy, then the programs may behave as if they were frozen, especially if the computer is weak and old. In this case, you just need to wait, but no more than 5-10 minutes.

What not to do if the program freezes

Many users do a lot of unnecessary actions, wasting their time.

Firstly, do not immediately reach for the “Reset” button or turn off the computer. Although, this is the most radical way to close the program (and all other programs :)). But are you going to restart your computer every time? You could spend the whole day doing this activity and not get anything done! In addition, unsaved data in other programs can be lost.

Secondly, there is no need to try to run the frozen program again. This will not help the matter in any way, but it will make the problem even worse!

And thirdly, you should not run other programs. This will only slow down the system even more.

How to close a program if it hangs

Since you can’t close the program with a cross, you can try pressing “ALT + F4”. This key combination closes the active program. Or click on the program icon in the upper left corner and select “Close”

Another harmless way to close a frozen program is to right-click on the program in the taskbar and select “Close program” there.

Sequencing:

• In the task manager, on the “Applications” tab, find our program and right-click on it
• In the context menu, select “End task” (or instead of the menu, click the button of the same name). If the program does not close immediately, then wait a little, a window confirming the end of the application should appear
• If, after confirmation, the program is still “hanging”, then right-click on it again, but this time select “Go to process”. Each running program has one or more processes in the computer's memory. If you close the corresponding process, the program will also close.
• After switching to the “Processes” tab, the cursor should already be on the process of the frozen program. Feel free to right-click on it and select “End process” or, to be sure, “End process tree”. The program should close almost immediately.

What to do if the program is not on the "Applications" tab

It may also be that when you call the task manager, our program is not in the list of running programs. Then you will have to go to the “Processes” tab and find the required process yourself. To do this, you can click on the header of the “CPU” column (processor load), thereby sorting all processes by processor load, and see the process that uses the most processor, and terminate it.

But a frozen program will not always load the processor, then you need to sort the processes by name and look for one similar to the name of the program. You can more accurately determine the process you are looking for by finding out the name of the launched file of our program. To do this, right-click on the program shortcut (whether on the desktop or in the Start menu) and select “Properties”.

In the “Object” line, look at the name of the file to be launched, which ends in “.exe”. This will be the name of the process that needs to be found in the task manager and terminated.

How can I close the program in another way?

You can also close the program using third party programs, for example from Sysinternals. This is a lightweight and free program that does not require installation. Just download and run “procexp.exe” from the archive.

Is there another way?

For the most advanced there is another way how to close a frozen program. To do this, call the “Run” window either through the “Start -> Run” menu, or with the hot keys “Win ​​+ R” and write “cmd” there. In the black window that opens, write:

"taskkill /f /im process_name.exe /t"

where "process_name.exe" is the process name of the hung program, for example "explorer.exe"

Most applications on your computer start and close in a similar way. There are usually several ways to terminate a program. Depending on the circumstances, you can choose to exit the program normally or urgently interrupt the processes it is running.

Posting sponsor P&G Articles on the topic "How to close an application on a computer" How to create a compiled file How to close a window on the desktop How to force it to load

Instructions

Other news on the topic:

In the Microsoft Windows operating system, each user can set their own parameters necessary for their work. Each user has their own account. You can change a user or end a user session in one of several ways. Placement Sponsor P&G

Using Windows Task Manager, the user can obtain information about the performance of the computer, currently running programs and running processes. To obtain the information you are interested in, you need to open the “Dispatcher” window. There are several ways to do this. Sponsor

To open files and folders, as well as to launch various applications on the computer, you need to left-click on the desired icon in the file location directory, the Start menu, in the panel quick launch or on the "Desktop". There are different ways to close an application window or folder.

The Task Manager application allows the user to close programs, monitor their execution and computer performance, and assign the priority of running processes. Knowing how to use the “dispatcher” is very useful, especially in cases where a program is not responding or

As a rule, the user knows what applications he is working with, what files he is opening, and what equipment he is connecting to the computer. But if there is a need to clarify whether a particular file is open, this can be done in several ways. The main thing is to know what and where to look. Sponsor of the placement

In some cases, unloading the antivirus is not necessary for uninstallation, but to temporarily suspend the operation of the antivirus package, which creates problems for correct operation certain programs. This operation is not difficult even for an inexperienced user, despite the abundance

Each launched on Windows application, which you use directly or which runs in the background, has its own process, the cache of which is stored in RAM and processed by the computer's processor. The list of running processes can be found in the task manager. Sponsor

Very often, users encounter such a problem when the software stops responding to any actions, and instead of the usual cursor an hourglass (Windows) appears, indicating that some process is happening, but after a certain time no changes are observed. In this case, the program is said to be frozen. If work will not continue after 5-10 minutes, then it is best to close it in emergency mode this application go play. The article will talk about what is not needed and what needs to be done if the program freezes.

What not to do?

Very often, not the most advanced users make many rash actions that can aggravate the situation and disable both the operating system and the “hardware” - computer parts. There is even a list of erroneous actions that are especially popular when the program freezes. You should study it carefully and never do the following actions.

1. Disconnecting a computer from the power supply is the most rash decision, since a computer, like any other device, runs on electrical energy. Problems can arise in a variety of ways: from a malfunction of the operating system to a burned-out power supply. Disabling using the "Start" button on the system unit can cause a similar effect.
2. An emergency reboot or “Reset” is advisable to use in situations where basic methods simply do not work.
3. Extra mouse movements, trying all the keys on the keyboard, etc. are not effective during a freeze, since each additional action loads the system, which is already slowed down by a non-working program.
4. Long waits will also not help resolve the problem, since statistics show that such a freeze goes away within 5-10 minutes. If you exceed this period of time, you should think about starting any active steps to fix the problem.
5. There is no need to be nervous or hysterical. If you were gaining Text Document, then most likely backing up in a text editor will allow you to save part of what you typed, but the nerve cells will not be restored. There is no need to kick the processor or hit the keyboard and mouse out of anger, since such actions can only lead to physical deformation, but will not save the situation.

Steps to close a frozen program in Windows

In the case of everyone popular versions Windows is simpler in all, since the initial action to close the program that caused the problem is organized by the operating system itself. A similar window (picture) will appear when any program freezes and will allow you to: wait until the freeze passes, close the program, or search for a solution to the problem on the Internet. In practice, only the first two buttons are used.

Also, for all versions of Windows, there is another method for emergency termination of any running applications - using the “Task Manager”. Typically, this service is called by the key combination “Ctrl” + “Shift” + “Esc”.

For regular user The functionality of this service is very simple. You will only have to use the tabs: “Applications” and “Processes”. In the applications tab you can see all active applications used by users (this does not include hidden processes in the operating system). Next, by opening the text menu when you right-click on a frozen application, you can “End task,” which should cause the program to close.

If this action does not help solve the problem, then you need to go to the “Processes” tab. But most often it contains a large list of processes corresponding to various programs running in the background. In order to quickly find the process we need, it is best to go to the “Applications” tab in the text menu specific program select the “Go to process” item, then on the selected line, repeat opening the text menu and click “End process”. If the software operates in multi-tabbed, multi-window mode, you can use another option and select “End process tree”, which will entail closing all open elements.

Also, the key combination “Alt” + “F4” often helps, which can only work if the user is in a window of a program that is not functioning normally. If pressed, emergency closure may occur. This method, like the task manager, copes well with emergency shutdowns and normally functioning applications.

How to close a frozen program on Mac?

If the device you are using runs on the Mac OS platform, then there are a number of ways to close a program that hangs and does not respond to operator requests.

1. Use the combination “Cmd” + “Alt” + “Esc” and then the window “ Force termination programs”, in which you need to select the disturbing program. If the user cannot decide which application is causing the entire system to slow down, then it is necessary to turn off the one opposite which the “Not responding” parameter appears in the line. Disabling occurs when you select and press the “End” button or when you use the more cumbersome key combination “Cmd” + “Alt” “Shift” + “Esc”. Alternatively, the shutdown window can be called up through the “Apple” menu, which can be entered by clicking on the “Apple” logo on the control panel at the top of the screen and then selecting “Force shutdown”.

1. Another option is to close the application through the Dock located at the bottom of the screen. In order to force shutdown, you need to hold down “Alt”, then right-click on the shortcut of the hanging program and select “Finish” from the list that appears.

Also, more advanced users can learn additional methods of action in such a situation, which apply to working with the Terminal (console in Mac OS) and the System Monitor utility. More complex methods that require certain knowledge can be studied on the Internet.

From the above we can conclude that you can cope with any problem that arises during work software, but don't panic if the program simply doesn't respond to your requests. Each of these methods will be able to solve a specific problem, and if nothing helps, there are many useful tips on the Internet on how to avoid or eliminate a similar situation in the future. In case there is no effective method there, there is an emergency “Reset” button to restart the computer, but it should only be used as a last resort.

Windows programs and games can freeze and slow down your computer, some quite often. There are several ways to close them - you can wait until the program “wakes up” and exit it, or call the task manager and force it to close from there.

Sometimes a program or game can seriously freeze the system, and there is no way to go to the task manager. What to do? How to close a frozen program? What other ones are there? quick ways closing programs that don't respond?

The easiest way to close the program is to use the ALT + F4 keys. Almost every computer user knows this combination. But it will not help us if the program freezes and when closing the message “Not responding” is displayed.

You can close the program through the Task Manager (press the key combination Ctrl+Shift+Esc), select the frozen application and click on the “End task” button. Sometimes forced closed program causes crashes in the Windows system and blocks the computer. A similar situation can arise in the case of closing games - when a full-screen application freezes, the only thing we can see on the screen is a black image that covers all windows.

Automatically "close" apps that don't respond

The first method is to make changes to the system settings, so that Windows automatically closes applications that are in the “Not Responding” status, that is, those that are frozen.

To enable this feature, go to Registry Editor. To do this, press the combination Windows keys+ R, enter in the Run window regedit command and confirm its launch with Enter.
In the editor window, navigate to the following path:

HKEY_CURRENT_USER/Control Panel/Desktop.

Then right-click on the Desktop entry and select New - String Parameter.

We name the created parameter as AutoEndTasks, then double-click on it and assign it the value “1” to activate it. After this, you should restart the system and you're done - now all applications running under account Windows user will close automatically when they freeze.

Closing applications using the ProcessKO utility

ProcessKO is a program that runs in the background and allows you to quickly close an application using hotkeys. Despite the use of hotkeys, the closing process is different from the usual ALT + F4 key combination. In the case of ProcessKO, the application will be closed instantly in the same way as when using the Task Manager. The only difference is that the utility does not require calling any window - you just need to remember the new key combination.

After installing the program, you need to leave it running in the background (it can be launched along with the system).

You also need to enable the keyboard shortcut - open the menu in the upper left corner, then go to the “Kill Hotkey” tab and select the first option.
From now on, when the program does not close (or when we simply want to close it quickly), just press the combination CTRL + ALT + F4. This will quickly close the application without saving any changes.

How to terminate a program via the command line

Sometimes open program or processes running in the background may freeze so much that even forcefully closing it through the Task Manager in Windows 10 does not help. In this case, it will be useful to close the process using command line.

This happens when the application either open window freezes to such an extent that nothing can be done with it. Such situations sometimes occur, and even the Windows Task Manager may have a problem closing the process responsible for this program. In such cases, we use another method to close processes running in the background - using the command line in administrator mode

Go to menu Windows Start 7 or before starting Windows screen 8.1 and enter the command in the search bar cmd. The list of found items should display the Command prompt. Right-click on it and select “Run as administrator.”

In Windows 10, right-click Start and select Command Prompt (Admin).

In the command prompt window, enter the command tasklist and confirm its execution with Enter. A table will open that lists the processes running on the computer. This is the same list that is found in the Task Manager window.

Then we look for a stuck or unnecessary program(process). You need to check what PID number it has - it is displayed next to the process name in the second column. We remember the PID number and type the following command on the keyboard to force it to close:

taskkill /pid ##

Instead of “##”, enter the PID of the process that you want to close. That is, if we want to close, for example, the AvastSvc.exe process, which is assigned PID 1496 in the list, then the command would look like this:

taskkill /pid 1496

After confirming with Enter, the specified process will be closed. In the same way, we can force close a program running in the background.

When working with mobile devices a certain amount of battery power is consumed. In addition, running programs load the operating system, which leads to software initialization errors, as well as slow operation of the phone or tablet. Next we will talk about how to close applications on Android. This is the OS that people use most often. Therefore, it will be useful for everyone to know about the correct shutdown of programs.

Ambiguity

In fact, there is no unique solution to the problem. It all depends on the phone model, as well as on the software used.

How to close applications on Android? Many developers provide a special button for this - “Exit”. Some programs require you to click "Back" several times to quit. It is recommended to take a closer look at the programs you are using - they probably have a special button to shut down the work.

Home and background mode

How to close applications on Android? Some people prefer to press the Home button. If you act in this way, the program you are using will actually close. More precisely, it will no longer be displayed on the screen, but nothing more.

Instead, the application will go to Or, as some users say, it will be minimized. Some programs go into the background when you click the "Exit" button. This fact must be taken into account. How to close background applications on Android?

Quick completion

The application manager will help you bring your idea to life. With its help, you can shut down programs and games on many Android devices.

The algorithm of actions boils down to the following manipulations:

1. Call the application manager. To do this, phones usually have a special button. For example, Samsung has it located to the left of the Home button.
2. In the list that appears, wipe from right to left (or vice versa) near the desired programs.
3. Click on the diagram image. A list of active applications that have not completed their work will appear.
4. Click on the "Finish" button.

How to close applications on Android? The answer to this question will no longer be difficult!

Dispatcher

But there is one more trick. It will help you complete everything background applications running on the device.

To use it, you need:

1. Click on Home button and go to the "Settings" section.
2. Find "Task/Application Manager" there.
3. In the list that appears, click on the button responsible for completing all running programs. It is usually located in the lower right corner.

Some people, thinking about how to close applications on Android, use so-called “task killers”. These utilities promise to complete everything with one click running processes. For Android, such programs are harmful. You can use them, but it is not recommended.

If some program has stopped responding, it does not respond to either the mouse or the keyboard, and perhaps even the message “program is not responding” appears, this is called a frozen program.

Sometimes it happens that a frozen program does not interfere with your work, but sometimes, on the contrary, because of one frozen program, the work of the entire OS can slow down, in any case, the problem must be solved, something must be done.

What not to do:

1) Unplug the plug from the socket- this is the biggest mistake you can make in this situation. A sudden power outage is very stressful for your computer. This item also includes turning off the computer using the start button on the system unit, and turning it off by pressing the power supply switch. The essence of these methods is the same, you stop the supply of electricity.

2) Press the reset button– this button is located on the front of the system unit and serves to force a reboot. It should be pressed only in the most hopeless situations, when other methods do not help.

3) Make unnecessary movements– if your operating system has started to slow down due to a frozen program, then any unnecessary action will only worsen the situation. By unnecessary actions I mean trying to restart a frozen program (under no circumstances should you do this), launching any other programs, opening the start menu or another menu. If the situation is particularly critical, then you should not just move the mouse, as the cursor may freeze and it will be more difficult to solve the problem.

4) Wait a very long time– as a rule, it is enough to wait five minutes in order to understand that the program has frozen; if you have a weak computer, give it 15–20 minutes. It is usually useless to wait further.

5) Be nervous- kicking system unit or banging the keyboard on the table won't help matters. I specifically wrote this point, because for unknown reasons people sometimes do this (probably due to our past, when a tube TV did not want to work, they usually hit it with their hand and this helped). A computer is not a tube TV, so don’t hit it.

What should be done

You need to try to close the program, if clicking on the cross in the upper right corner and the alt + f4 combination do not help, then you need to do the following:

Press the key combination to open the task manager:

For Windows xp “Ctrl + Alt + Del”.

For Windows 7 “Ctrl + Shift + Esc”.

In the task manager, go to the “Applications” tab, if your program is displayed in the task section, then select it and click on the “End task” button. If there is no reaction immediately, you do not need to press this button again, you just need to wait a little. After a while, a window will appear warning that the data may be lost, you will need to click on the “Finish now” button. For an example, see the screenshot (I completed work program, so your text will be different, but the principle is the same).

If you cannot terminate the program in this way, then right-click on the frozen program and select “Go to process” from the drop-down menu. You will automatically be taken to the “Processes” tab, the required process will already be highlighted, you just need to click on the “End Process” button.

If the frozen program is not displayed in the “Applications” tab, then you need to go to the “Processes” tab, find the process of the frozen program and end it. The easiest way to search for a process is by name; you can also search by the degree of processor load; usually a frozen application has a large percentage.

If you have launched many programs and you are dead tired of it, it's time to close them all. However, closing each program, one after another, is extremely tedious. Why not do it with one click using a program as simple as carrots called CloseAll.

To do this, download the program:

This is a regular archive that needs to be unpacked into any folder where you want.

Now just click on the file icon and all programs will be closed in one fell swoop.

However, I personally find it more convenient to use my chosen key combination to close programs. In addition, why not specify exception programs that cannot be closed in this way? Let's say an antivirus or a browser. You can do this as follows.

Right-click on the CloseAll icon located on the taskbar. A small pop-up window will appear.

In this window, right-click on the name CloseAll and select Properties.

A new window will open in which in the Shortcut field you need to specify a key combination for, simply amazingly, quickly launching this program.

Now you need to specify exceptions. To do this, enter the following value in the Object field:

X="program_name.exe"

If there are several programs, you can specify them with the separation “I”, say, like this:

X="chrome.exe|antivirus.exe|game.exe"

All you have to do is click on the button OK and the job is done. Now you can close all programs faster than you can blink your eye.