My Hot Spot is a program for creating a safe and private point WiFi access on a Windows PC or laptop. At the same time, it works with both home and public networks. For security, HTTPS encryption is used. The application supports Russified and English-language interface, which is a definite plus.
With the MyHotSpot program, the user does not have to worry about personal correspondence, since this information will remain invisible to external web services and the connection provider. The same applies to the log of user visits to web pages. Having opened this or that site, you should not worry that someone will be able to see these actions, the web session will remain anonymous. Incoming and outgoing traffic is also subject to strong encryption.
Program features:
- high degree of protection of transmitted and received data;
- complete confidentiality of user information;
- absolute access to all network content;
- repelling a spy invasion from outside;
- the ability to work with both wired and wireless communications;
- web session protection and data encryption via the HTTPS protocol.
Wi-Fi Point is a great alternative to an expensive router. Using it, you can make a full-fledged Wi-Fi access point out of your laptop (you can find other programs for running HotSpot on Windows and instructions for them), and then connect to it using a smartphone, tablet, etc. portable devices. It is very profitable and convenient: you do not need to purchase additional equipment that often breaks down.
After launch, the application will determine everything network connections, which are available on this computer and select the active one among them. That is, you need to download Wi-Fi Point and run it - the program will do the rest by itself. Next, you just set the name of the access point, set a password (if necessary) and limit the number of devices that can connect to Wi-Fi at the same time.
Where can I use Wi-Fi Point? First of all, in a house or apartment, when the size of the room is relatively small, and the created Wi-Fi point will allow you to surf the Internet even in the kitchen. Also, the program will help to create a temporary network access point in a conference room, office or hotel room.
Other advantages of Wi-Fi Point are no less interesting:
- The software is very easy to use. It does not even require installation, the use of any special devices.
- To create a hotspot (another name for a Wi-Fi point), you only need to set the SSID and network password. The name can be anything!
- At the same time, 10 clients can connect to the point created in the Wi-Fi Point program. This is maximum.
- You don't have to worry about the security of the transmitted data. At least because encryption takes place using the reliable WPA protocol
- In the status of the program, the user will be able to monitor network data, its status (active or not), as well as the number of connected clients.
MyPublic WiFi – free utility, with which you can turn your laptop or computer into a WiFi hotspot.
According to the developers themselves, the MyPublicWiFi program is ideal for organizing network access in an apartment, hotel room, office or conference room. The creation of a Wi-Fi hotspot is fully automated.
MyPublicWiFi Features:
- Distribution of access to the Internet via a wireless Wi-Fi communication channel. Anyone who knows the password can connect to such a point: your relatives, colleagues, friends.
- Support for WPA2 encryption. When creating an access point, it is recommended to come up with a complex password so that only trusted people can use your hotspot.
- built-in (firewall). It is a powerful and at the same time easy-to-use tool for monitoring outgoing traffic. It also allows you to restrict access to specific servers. For example, it can be used to prevent downloading files from certain sites.
- Accounting for all actions of users connected to the access point within the working session. Thanks to this feature, the administrator or owner of the "hotspot" can see the URLs of all pages visited from a portable device.
- Logging. All actions of the program are recorded in a text file.
- Small size. The installation file of the MyPublicWiFi application is a little over 1 MB.
It is enough to download MyPublicWiFi and activate the hotspot in the contribution "Settings", specifying the network name, network type, and password. In another contribution Client Tab the user will see a list of all devices connected to the created hotspot.
Program screenshots
In this article, we will look at the most popular programs with which you can start distributing Wi-Fi from a laptop, or a computer that runs on Windows 10, Windows 8 (8.1), and Windows 7. But, I will show the setup process using a laptop as an example on which Windows 10 is installed. All the same, this is a new, popular system, and we will consider it using its example. But, you will not notice any significant difference even with Windows 7. So, this instruction is suitable for all computers and laptops that run on Windows 7 and newer systems.
For those who are not in the know, and do not know how to distribute Wi-Fi from a laptop, start an access point, and what to use special programs, I explain. Windows has the ability to run virtual wifi net. Simply put, turn a laptop or computer with a Wi-Fi adapter into a regular router. Our laptop is connected to the Internet. We launch a Wi-Fi access point, in our case with the help of a program, and the laptop starts distributing the Internet wirelessly. In this way, you can distribute Wi-Fi to your phone, tablet, other laptops, etc. The main thing is that your computer must have Wi-Fi and the Internet (via network cable, or via USB modem).
To launch a wireless access point, you can use special programs. And you can do without them, and start the distribution by executing certain commands in command line, and opening the general access to the Internet. For example, it’s easier for me to start the network using commands than to use third party programs. We already have detailed instructions to launch an access point on a laptop through the command line:
- And instructions specifically for those who have.
In this article, I will show several programs created specifically for launching Wi-Fi distribution from a laptop and for managing a virtual network. I picked 4 of the best popular programs, including one paid (I don't know if it's necessary, but I'll show it). Today I sat for half a day and checked these programs on a computer with Windows 10. I figured out each one, configured it, and checked it. Everything works for me, the laptop distributed Wi-Fi to the smartphone, the Internet worked.
Choose a program:
- Virtual Router, she is Virtual Router Plus (As far as I understand, in older versions). The easiest, free and working programm. Well, probably the most popular. Works great in Windows 10. There is a Russian language, but the translation is very bad (he is not needed there).
- Switch Virtual Router. Another demon paid program for distributing Wi-Fi from a computer. It has more settings than "Virtual Router". There is a Russian language and a clear interface. I have already written about this program, but let's look at it again.
- Maryfi(Russian version) . The program is also free, but something didn’t work out for me with it. At first, Yandex did not let me go to the official website, they say there is a virus (but, this is not a fact, the antivirus did not swear). I downloaded it, installed it, but I could not start the access point. And in general, problems with the virtual adapter started, I had to reinstall the drivers. Maybe it's just me having these problems. So it seems like the program is good and popular.
- Connectify 2016. Very cool and functional app. But paid. There seems to be a trial period. At least I managed to launch a virtual Wi-Fi network with it. It is immediately clear that the software is paid, there are a lot of cool chips. But, I did not find the Russian language.
Of course, there are other options, but we will consider only these programs. They are enough.
Important advice! Choose one program for you (Which one do you like the most), download and use it. No need to download and install / run everything at once. And then nothing at all will work. If, for example, when starting the network in the Virtual Router program, an error appears that it is impossible to start, then it will also be in other programs, since the problem is most likely in the Wi-Fi adapter (no driver, it's disabled, wrong driver). The principle of operation of these programs is the same, we can say that they differ only in the interface and not very necessary functions. (such as autorun, displaying Wi-Fi clients, etc.).
The program will only create and run a virtual network. You can connect to it, but in order for the Internet to work, you need be sure to allow public access to the internet (except Connectify) . How to do this, I will write at the end of the article.
We set it up like this:
- Download and install the selected program.
- We start the distribution of Wi-Fi in the program. If a startup error appears, then we solve it.
- We open the general access to the Internet, in the properties of the connection.
Here we go!
Virtual Router Plus: Wi-Fi Sharing Software for Windows 10
I checked the version of Virtual Router v3.3. It is of course very different from Virtual Router Plus, but it works well. You can download it from .
No installation required. Just unzip the downloaded archive and run the file VirtualRouter.exe. Most likely, the official website will open in the browser, just close it.
Immediately after launch, Virtual Router will try to start distributing a Wi-Fi network. If the status says "work", then the network is already running. And now, you need to open the general access to the Internet (how to do this, see the end of the article), restart your computer, and run the program again.
And if the status says "Virtual Router failed to start", then the problem is most likely in the wireless adapter itself. He wrote about solving this problem in an article:.
Using the program is very simple: turned it off, it hid in the notification panel. Closed, the distribution of the wireless network has stopped.
Switch Virtual Router Program to Run Wi-Fi Hotspot on Windows
It seems to me that this the best program. There are all the necessary functions, Russian language and it is free. You can download from the link. Or, from the official website http://switchvirtualrouter.narod.ru.
We start the installation, and install Switch Virtual Router. Then, we start the program. If you want to change the default network name and password, then click on the button in the form of a gear and set new parameters. There are also other settings there.
To start the hotspot, just click on the "Start" button, and open Internet sharing (instruction at the end of the article).
I will not write anything else on this program, since we already have it on the site. Everything is very detailed there, with all the nuances. By the way, if the error "Wi-Fi adapter is turned off" appears, then you need to check the operation of the virtual adapter.
Maryfi setup. Share internet from laptop
If you decide to use the Maryfi program, then the Russian version can be downloaded from (version 1.1), or from the page on the official website http://www.maryfi.com/maryfi-russian-edition.php (I don’t give a direct link, since Yandex says the site is harmful. But the antivirus did not find any viruses).
Run setup file, and install the application. Most likely, during the first launch of Maryfi, the program will ask you to install the Microsoft . NET Framework 3.5. You just need to agree. The system itself will download and install everything. After that, you can start Maryfi.
In fact, the entire program fit into one small window. There we set the network name and password, and click on the "Start Wi-Fi" button. If everything is in order with the Wi-Fi adapter, then the network will be launched.
If the network starts up, then you need to open the general access to the Internet, and you're done.
Connectify 2016 to Run Hotspot on Computer
I remind you that this is a paid program, but it seems to be with a free, greatly curtailed version, or with a trial period. But the program is very cool. Lots of different features. What I liked the most is that you don't have to manually open Internet Sharing (many people have problems with this). Just choose from which connection to share the Internet, and you're done.
I downloaded Connectify from the official site: http://www.connectify.me/hotspot/ . After downloading the program, you need to install it on your computer and run it.
Further, everything is very simple (even without Russian language). We select the connection through which you are connected to the Internet, if necessary, change the network name and password, and click on the "Start Hotspot" button.
The computer will immediately start distributing the Internet. I connected the phone, and the Internet was already working. After launch, a tab immediately opens, which displays connected devices (clients). And even statistics are displayed, how much Internet they use. In the program, near the fields, you can see the inscriptions "MAX", and "PRO". These are most likely features that are only available in the paid version. But you can do without them.
If I'm not mistaken, and there really is a free, stripped-down version of this program, then I advise you to use it.
Opening public access to the Internet
If you launched a Wi-Fi network through the Virtual Router, Switch Virtual Router, or Maryfi program, then you definitely need to set up sharing. Otherwise, there will be no internet access.
Right-click on the Internet connection icon and open "Network and Sharing Center". Next, go to "Change adapter settings".
Right-click on the connection through which you are connected to the Internet, and select "Properties".
Open the "Access" tab, check the box next to "Allow other network users ...", select the connection we created from the list, and click "Ok".
Important! After these steps, you need to restart your computer and restart the distribution of Wi-Fi in the program. After that, you can connect your devices to the network. The internet should be up and running.
If devices do not connect to a running Wi-Fi network
If an error occurs during connection that it is impossible to connect, or an IP address is constantly obtained, then the first step is to disable the antivirus. Also, you can disable the firewall, and other programs that can block the connection.
Most often, it is the antivirus that is to blame. It blocks the connection of the device.
Afterword
Something seems to me that this article will be a lot of questions. Ask them in the comments.
I tried to describe all the points that may appear during the launch of the access point using programs. But the equipment operating system, the set of programs and drivers is different for everyone. Therefore, various problems may appear. Read the article carefully, see the links I gave, but if nothing works, then describe the problem in the comments. Best wishes!
Meet the best selection free applications for computer and laptop to create a distribution WiFi connections. See instructions for creating an access point without a router and solving a problem with a wireless network problem using third-party programs.
If there is one, then your laptop has a Wi-Fi module.
| Photo | Name | Description |
|---|---|---|
| WiFi Virtual Router | An application that creates a router from your PC or laptop using the computer's system settings for this. Now you can share Wi-Fi and receive it with other devices if they are within range | |
| Connectify | The program does not take up much space and uses your computer as a Wi-Fi hotspot. Installed for free, only works with Windows 7 and above, no additional devices required | |
| MyPublic WiFi | The application will quickly set up an access point with Internet access on your device. Restricts the use of special P2P connection functions so that the user can comfortably surf sites and watch videos. These actions require a built-in Wi-Fi module. | |
| mHotspot | When connected to the Internet, this program can create a hotspot from your Wi-Fi device. Convenient and simple setup will help you easily deal with this utility. | |
| SwitchVirtualRouter | The utility does an excellent job of creating and managing a virtual access point to the Internet. Built-in convenient settings for starting and disabling a wireless Wi-Fi network. The program was developed specifically for Windows OS | |
| winhot spot | If your PC or laptop has a built-in wireless module to receive and transmit the Internet, then you can install this free app. With this program, you can create a virtual point for accessing the Internet by other devices via Wi-Fi |
Detailed description of Connectify
The program uses the capabilities of your module on a laptop to create a point public access Internet with other gadgets. Works with Windows 7 and up. Simplifies standard settings OS for sharing Wi-Fi and indispensable for using together with several devices. It saves users from tangled router wires, and if you follow the installation instructions and recommendations for work, then this is an indispensable alternative to expensive modems.
How to install connectify
How to set Connectify to start automatically
When the computer restarts, a shortcut with the name of the program will appear on the desktop, launch it.
- In the program menu top panel click on "Settings" and in the "Startup" option, check the box. This will allow you to run the program along with the PC. To disable services, you can use the "Disable all .." item.
Note! In the Display parameter, you can activate services for displaying and connecting Connectify. And for advanced users, there are settings in the Advanced tab. But these functions are active only in the paid version of the program. They are disabled in the free version.
- Pay attention to the "Firewall" block. Checkboxes must be active.
More experienced users can use the “Wired Router” item instead of an access point to distribute the Internet using the controller.
And you can also use a repeater that amplifies the signal and range of Wi-Fi.
- Now you can click on the "Launch Hotspot" button.
In the menu bar there is an item "Clients". In it, you can get acquainted with the connected devices to your created wireless access point to the Internet.
If the program notifies you that there is no distribution, then check your Internet connection by disabling the utility. If the Internet is working, there is a possibility that the Wi-Fi module on the laptop is missing. How to check if the device is installed for wireless communication, read at the beginning of the article.
Detailed description of WiFi Virtual Router
A program that does not require the presence of a router and similar additional equipment. The built-in Wi-Fi module will completely replace these devices, but with a smaller signal radius and coverage area for receiving Internet connections on a phone, tablet, etc. your laptop with WiFi utilities Virtual Router will broadcast a signal as the same router, using the built-in module and system parameters computer.
Advantages and disadvantages
| Advantages | Flaws |
|---|---|
| Minimum options for setting up (to create a workplace with Wi-Fi access, you need to select the name of the point, come up with a password and activate the Internet connection) | Fresh and raw program has no support and guarantees. Released by the manufacturer as an experimental version, which is no longer alarming |
| Installed without additional software and does not contain ads. Has a free version | It may be necessary, after installing this software, to configure the PC for the correct functionality of the utility |
| There is no need to purchase any of the additional equipment. System resources when working with the application are not consumed much |
See photos of WiFi Virtual Router
Detailed description of MyPublicWiFi
The most quick setup for distributing the Internet through a laptop with the English program MyPublicWiFi is a couple of mouse clicks. The program does not require the connection of additional software and third-party equipment. Compatibility: Windows 10, 8.1, 8, 7, Vista.
After installation, the utility should be launched: right-click on the shortcut and select "Run this program as administrator".
The simple interface is divided into several panels:
- Management- Responsible for configuring the Firewall. Excludes torrent and file sharing icons to free up channels. The program can be launched together with the OS at startup, in the same menu, you need to activate the checkbox for this;
- Clients- an information window for monitoring devices connected to the Internet access point created by the program;
- Setting- the settings mode window, in which you can assign a name, come up with and enter the desired password for wireless connection to the internet. You can also use the possibility of 3G / 4G connections if the laptop supports the connection of Sim-cards (in case the service is allowed by the operator mobile communications distribute Wi-Fi).
Advantages and disadvantages
| Advantages | Flaws |
|---|---|
| Regular program updates | No possibility to use various laptops to create available Wi-Fi hotspots. The developers of the program attribute this to non-standard configurations of network modules located in laptops. |
| Setting a password on Wi-Fi to prevent third-party connection by users | Supported hardware expands with updates |
| Quick setup of a wireless access point | Always run as administrator program requirements |
| In the options for choosing the language interface, Russian is missing |
See photos of the program MyPublicWiFi
Detailed description of mHotspot
The program has a free license with which you agree before installation. Supports multiple encryption processing options, which is convenient and reliable for protecting your Internet connection. Attempts by attackers to break into your confidential information will be unsuccessful. Compatibility: Windows 10, 8.1, 8, 7. The developers are trying to please users as much as possible and are now looking for a solution to run this utility on Ubuntu OS.
The main panel of the program interface contains active information in English:
- information about the volume of incoming and outgoing data:
- the speed of information received and return via the Internet;
- number of connected users/devices to a given Wi-Fi hotspot
- in the "Clients connected" tab you can learn more about connected clients.
Advantages and disadvantages
| Advantages | Flaws |
|---|---|
| Supports maintenance of 10 gadgets at the same time | Program updates delay |
| Fast, independent and auto tuning Wi-Fi access with password setting | |
| Support for working with Internet protocols 3G, 4G, Lan in the background |
See photos of the mHotspot program
Detailed description of SwitchVirtualRouter
Create a virtual "Hot Spot" Wi-Fi hotspot using the SwitchVirtualRouter utility. The lack of a router will replace the wireless internet module installed on your laptop. After installing and configuring the application, the Internet can be used by several devices at once through the Wi-Fi module.
Setting up the application is quite simple.
- On home page you can set the functions to work: start with OS loading, add an icon to the tray, and much more.
- After downloading the application, specify the parameters of the wireless Internet distribution for it to work in automatic mode. The program also supports the distribution of the Internet to several devices at once.
Advantages and Disadvantages of SwitchVirtualRouter
| Advantages | Flaws |
|---|---|
| A small amount of the program does not require resource costs | The program is configured to work only with Windows 7 and 8 version |
| Control over connected devices | |
| Built-in function to turn off the computer or put it into "Hibernation" mode |
See photos of the program SwitchVirtualRouter
