Set vibration on iphone 7. How to enable and how to disable vibration on iPhone. Putting the device into silent mode

IN modern world it’s rather unpleasant to be without the Internet, especially if you need to have Internet on your laptop for work, and something happens to the provider or there is a power failure.

Fortunately, with advances in technology, our phones and tablets are no longer just a way to conveniently make calls or play games on the big screen. They can perform many functions, especially if they are connected Mobile Internet through a SIM card of any operator. Since mobile Internet tariffs are now much more affordable than even five years ago, almost all smartphones now have access to the network and you can easily turn your phone into a modem with a few settings.

In this article, we will figure out how to distribute the Internet on an iPhone, as well as what to do if there are problems with distributing the Internet.

Setting up tethering on iPhone

Tethering mode is a special feature in a smartphone that allows you to transfer the Internet that is on your phone to other devices like using a router.

In order to set up this mode on your phone, you need to:

• Go to "Settings", then select the "Cellular" item there or the "Tethering Mode" item - it depends on what phone you have.
• After that, in the tab called "Modem Mode" you need to switch the tuibler with a flick of your finger so that the head is opposite the on position.
• If you do not have the "Tethering mode" option on your phone, you need to contact your operator mobile communications. Some plans do not allow this feature.

Connect to the Internet using your phone via Wi-Fi, Bluetooth or USB

Also, iPhone owners should know that they can connect to a phone that distributes the Internet in three different ways - Wi-Fi, Bluetooth or USB. If you have a desktop computer, then the third method is most likely suitable, and if you need to distribute the Internet to a device that cannot connect to Wi-Fi, then the second or third method will do.

When a device connects to your iPhone, which acts as a router, the status bar on the phone turns blue and displays how many devices are connected to it. How many devices can connect to the internet from your phone depends on your plan. mobile operator, as well as iPhone models.

It is also important to know that if you distribute the Internet through your phone and other devices are connected to it in Wi-Fi mode, then on your phone you can only use the mobile Internet and cannot connect to Wi-Fi from the router, otherwise the connection will be modem mode will disappear.

WiFi Mode

In order to connect other devices to the Internet via iPhone, you need to turn on the modem mode on your phone (“Settings”, “Cellular”, “Tethering mode” or “Settings”, “Tethering mode”, move the slider to “On”).

After that, you should check the name of the phone (it will be the name of the network), check the password through which you can connect to Wi-Fi. Note that these settings do not need to be closed until another phone or computer is connected to the network.

On the device that you want to connect to the Internet, you should open "Settings", then "Wi-Fi", and select iPhone or iPad from the list. After that, click on the network to which you want to connect (the network name is the name of your phone), and also enter the password for the network.

In addition, you can connect by simply searching for networks, as you usually do from your phone or laptop, select the iPhone modem, enter the password and connect.

Bluetooth

Before you connect to the network via Bluetooth, you need to look in the settings to see if the iPhone or iPad is visible. To do this, go to the "Settings" screen and select the "Bluetooth" item in it, leave the phone like this, do not close the screen. Then you need to set up Bluetooth on your computer. This may require a special adapter or settings. It all depends on your computer, you just need to google the model of your computer or laptop and look for how to connect via this wireless network.

Please note that the phone can distribute the Internet via tethering to Macs, PCs and other non-Apple devices. If you want to connect an iOS device (another phone or tablet), you should use Wi-Fi connectivity.

USB

In order to connect to the Internet from iPhone via USB, you need to have the latest installed on your Mac or PC. iTunes version. If necessary, you need to update or download it.

After that, you need to connect a phone that will distribute the Internet to the computer via USB cable, it should come with your phone. After you have connected the device, you should have the question “Trust this computer” on your phone, in order to connect, you should select “Trust”.

To disconnect your computer, tablet, or phone from your iPhone in hotspot mode, you need to disconnect the cable from your phone or turn off Bluetooth on your iPhone, and turn off Wi-Fi on your phone or tablet.

Setting or changing a Wi-Fi password

In order to prevent other people from connecting to your phone when you distribute the Internet, you need to set a password for the connection.

To install or change wifi password, you need to go to “Settings”, select “Cellular”, and after that “Tethering mode” or just “Settings”, and after that “Tethering mode”. After that, in the paragraph it is worth clicking "Wi-Fi Password".

In order for you to be able to set a password, it must be no shorter than eight ASCII characters. If you use characters not in this table, you may experience difficulty connecting other devices to your phone. This table does not include characters from Chinese, Russian, Japanese, and other languages ​​that do not use standard Latin. It's just:

1. All letters of the Latin alphabet, both small and large.
2. Numbers.
3. Certain punctuation marks.

Please note that after you change the password or put it on the device, the computer or phone that was connected to the phone in modem mode will be disconnected from the Internet.

Attention! Some programs or functionality in some programs that require an Internet connection may not run or work if the World Wide Web is supplied through a phone that distributes the Internet. Yes, maybe not backup iCloud, and you won't be able to upload images to your library.

Do you use Apple products? Then you will be interested in our article about TOP 5 ways to record calls on the IPhone, where we analyzed this topic in detail.

If the tethering function does not work

If you have lost the modem mode, first of all you need to make sure that everything is on. Check again the “Tethering mode” parameter in the settings section. If the setting is enabled, then you need to call the operator cellular communication and ask if your tariff supports the function of distributing the Internet to other devices.

Also, if connection attempts fail, you should reboot both devices and try again. Perhaps the reason for the failure is that the iPhone has not received updates for a long time. Try updating the system version.

1. If none of the above applies to you, try the following method:
2. On the iPhone, select "Settings", then "General", then select "Reset", and in this tab "Reset network settings".
3. If after that it was not possible to connect, you need to act more pointwise and solve the problem with each specific connection.

If you can't connect via Wi-Fi

On the phone that will act as a modem, tap Settings followed by Hotspot Mode. After that, you should do the following:

• Make sure all features are working and connected.
• Make a note of the device name and password that will be displayed there.
• Disconnect and reconnect wireless network on the phone or personal computer that you want to connect to the internet connect to the network.
• Enter the password again on the laptop, desktop computer or tablet that you want to connect to the internet.
• You also need to be sure that you are connecting to correct network. There may be another phone in the area with a very similar name. In this case, you should have a window that warns you that the password does not match the network.

If you still can’t connect to the device, read the last paragraph in our article.

If you cannot connect via USB

If you are connecting via a wire, then in order not to spend extra money on mobile Internet, turn off “Tethering Mode” when you are not using them. Otherwise, every time you connect your phone to your computer via a wire, your computer will use the Internet from your phone.

If you are unable to connect to the Internet via a wire, then try the following:

• Update iTunes to latest version, most often the reason for the failure of the connection is in it.
• When you connect to the Internet via USB, you need to make the device trusted - confirm that you trust the computer.
• You should also be sure that iTunes sees your device. In the case when he does not see, then try connecting through a new wire.
• You can also try going to System settings”, there select the “Network” item and check the box next to the inscription iPhone USB.
• If you can't connect via Bluetooth

If you can't connect on this network, you need to pair your phone and tablet, another phone, or a computer. To create a pair:

1. On the phone that distributes the Internet, go to the settings and see that the network distribution function is connected.
2. Also, in the settings, see if Bluetooth is enabled, then leave the screen on the phone open, do not exit the settings.
3. On the computer or phone you're connecting to, select your Bluetooth device name and click Pair. The same must be selected in the Bluetooth settings and on the second device.

If you cannot connect via Bluetooth

After we figured out how to make a modem mode on an iPhone and connect it to a phone or tablet, it's worth talking about connecting to a Mac or another computer if you can't do it the first time.

To connect, click the Bluetooth icon in the menu, when you have a list, select your device, click Connect to Network. In order to confirm the connection, you need to select “System Settings”, and in them find “Network”.

If you still can’t connect, then on the computer click “Bluetooth” and in it “Join personal network(PAN)”, then find your device in the item “Connect via” - “Access point”. In this case, everything should work.

Another way to connect. First, disconnect and reconnect the wireless network on the computer, tablet or other device that you want to connect to the Internet and also restart the phone, which works like a router. After:

1. On iOS, click "Settings", go to the "Bluetooth" section.
2. On an Apple computer, select “Bluetooth” and reconnect it by turning it off and on again.
3. On a computer from another company, you should click on the “Settings” tab, then “Bluetooth”, and then reconnect through shutdown and connection.

If you still can't connect

If you've tried all of the options above and still can't establish a connection between your iPhone in hotspot mode and another device, you should try the solutions below.

If you want to connect to a phone that distributes the Internet iPad or iPod touch, then on the device that will connect, select “Settings”, “Bluetooth”, then click on the icon next to the phone name and select “Forget this device”, then try to connect again by entering the required password and before that restarting both devices .

If you are going to connect to the Internet via phone Mac computer, then select “ Apple Menu”, go to “System Settings” and select “Bluetooth” there, you will have an icon, you should click on the device that distributes the Internet and click on “X”. After that, try to reconnect to the Internet through your phone, before doing so, restarting both devices.

You may be interested in the article on our website on the topic “How to turn on the flash on iPhone when calling and texting”, where there is detailed instructions and a description of the function.

On a Windows PC, you need to select “Bluetooth” to reconnect, it will be in the lower right corner where you receive notifications. You need to click "Show Bluetooth devices” and select the name of your phone, which distributes the Internet. Then click "Delete" and confirm your action in a special window. After these steps, restart both devices and try to connect again.

If you are unable to connect, then the problem is most likely with your phone. You need to contact Apple Support for assistance or take your device to service center.

conclusions

In this article, we have tried to cover all possible reasons, by which the modem mode on the iPhone most often disappears, and also figured out how to connect different devices and use different ways connections. If you still have questions, ask them in the comments, and also share your own ways to solve the problem of connecting to the phone in modem mode.

Hi all! I will not start the article with a description of how important vibrating is and that anyone iPhone owner without it, just nowhere. Although it would be possible - after all, this is a fairly common practice on these Internets of yours. For example, to a simple query “why did the vibrating call break down”, some authors begin the answer almost with the history of the emergence and appearance of the vibration motor. I saw such informative instructions ...

I didn't want to, but I got distracted anyway. Okay, let's move on to the main problem - what to do if the vibration in the iPhone does not work and can you fix it all yourself without resorting to the services of a service center? Looking ahead, I will note - in some cases, as much as possible. That's what we'll talk about today. Let's go!

So, there are three reasons why your iPhone does not vibrate:

1. Software failures and settings.
2. "Sticking" of the vibration motor.
3. Vibro breakdown.

Vibro does not work - check iOS settings

Yes, yes, yes, you have almost certainly already checked everything and decided to skip this paragraph. But in vain. For example, if the vibration does not work only when making a call and in silent mode (everything is “OK” for other actions), then you should go to “Settings - Sounds” and:

Also, in order to exclude all software “glitches” of iOS, it will not be superfluous to do:

1. Remember if you have installed any programs directly or indirectly related to sound and ringtones. If yes, then remove them for a while.
2. I met advice on many sites -. In my opinion, you only need to do this when you have a jailbreak installed. Some of his tweaks can "stand up" incorrectly and create vibration problems at the software level.

Did all the steps and did not find any signs of vibration - did it disappear entirely? Most likely, the vibration motor itself is to blame.

iPhone not vibrating due to sticky motor

No matter how strange the title sounds, but this is also possible. Moreover, this is the simplest “breakdown” (if it can be called that at all) and, in some cases, it is corrected very simply.

Reasons for this behavior:

1. Moisture ingress.
2. Falls and hits.
3. Poor repair and accessories. Often (but not always!) The replacement of the display is to blame.
4. The inexplicable ones are when they say “I didn’t do anything with the iPhone, but the vibro stopped working for it.”

How to deal with it?

knock on back cover around the vibration motor. I'm serious. I myself would never have believed that it works if I had not seen such a “repair” with my own eyes. It was probably the fastest troubleshooting I've ever seen.

Naturally, you need to knock carefully - throwing the iPhone into the wall is not recommended. Well, it’s clear that this will help only if the vibration motor is really “stuck” and stops working on its own.

If it doesn’t help, then you will have to disassemble the device - check the connection of the vibration motor and see what prevents it from rattling.

Vibration gone - broken motor

The most unpleasant situation is to “get” for repair and replacement of spare parts. Here, no matter how you knock, check the connection, or flash your iPhone, the vibration will not work until you replace the motor itself.

Why can it break or burn out? Yes, all for the same reasons mentioned above - falls or moisture ingress. Although, one should not exclude the defect of the part - especially if this part was originally not of the highest quality.

The only joy in all this is that the vibration motor for the iPhone is inexpensive and, with proper skill, you can replace it yourself “at home” (no soldering is required). However, if you do not have the necessary skills, it is better to contact the service center. There, they will also carry out diagnostics for free (in most cases) and quickly (if this is a normal workshop) correct the lack of vibration.

P.S. True, as usual, I hope that in your case it will not come to visiting the SC and everything will be fixed in other, simpler ways.

P.S.S. We put "like" so that everything can be done without serious repairs! Plus, be sure to ask questions and tell your stories in the comments. I will help with all I can!

Each contact in iOS can be assigned not only a personal ringtone, but also a personal vibration (vibration ringtone). Thanks to such actions, it becomes possible to always recognize the caller without looking at the smartphone screen. Even if the silent mode was turned on.

In order to set a personal vibro-ringtone for each of the contacts, open "Contacts", select the desired contact and click on the "Edit" button. In the editing window, use the "Vibration" item. Then, in the list that opens, select the vibro ringtone that you like best.

However, by default, iOS has 7 types of vibration. And this is definitely not enough. Fortunately, the user has the opportunity to create a vibro ringtone on their own. To do this, in the list of vibrations in the "Arbitrary" section, select "Create".

Creating vibration is a very simple procedure. Just tap on the screen. Pressing can be short and long, you can also alternate pauses between them. That, in fact, is all. If you need a short vibration, then the creation process can be stopped with the "Stop" button in the lower right part of the screen. As soon as the vibration is ready, click on the "Record" button, after which you will need to give the new vibrating call a name.

By the way, you can create vibrating alerts not only through "Contacts", but also through "Settings" - "Sounds". In the window that opens, in the item "Sounds and vibration patterns" select "Ringtone", then at the very top of the list that opens - "Vibration".

Vibration on the iPhone is one of the most common topics that concern users of these gadgets. In particular, smartphone owners are interested in questions about how to turn on iPhone vibration, how to turn off vibration. There are also some difficulties when vibration does not work on the iPhone 4, iPhone 5, iPhone 5S and other models of apple devices. An equally important question is how to remove vibration if this iPhone function has become unnecessary for the user.

The iPhone settings, which involve turning on the vibration motor, are very specific. Therefore, each user must figure out how to turn on vibration on an iPhone, what methods can be used for this, and what to do if the vibration disappears or the vibro switch does not work. These and many other questions will be discussed in today's article.

The easiest way to turn off this feature is when you just need to turn off vibration for calls and messages. This is meant to completely stop working when a call is in progress. To do this, you need to switch the corresponding parameter in the sound settings, namely, in the section during a call.

If the user is thinking about how to remove vibration during SMS, they will have to tinker a little here to instruct the function to stop working. Specifically, the following steps must be followed:

• Set your device to silent mode.
• Go to sound settings.
• Enter silent mode.
• Disable feature.

It should be noted that vibration control on a smartphone can only be done thanks to the above two parameters. Accordingly, in the future we will talk about how to work with them.

Ways to Completely Disable/Enable Vibration on iPhone

Apple gadgets have one secret, which is that in critical situations, the user has the ability to turn off the vibration function very quickly. And only one button will help him in this.

In order for the device to stop vibrating during calls and SMS, the user must go to the main settings, select the accessibility section, and then vibration. If the owner of the iPhone then needs to activate the function in the future, it will be very simple to do this, for which you will need to follow the same steps, but in the last action, select the action to turn on the vibration. Otherwise, it may happen that the vibration does not work, and the user receives an important call or SMS.

Setting vibration with a smartphone alarm

Many owners of apple gadgets are interested in the question of how to set this function using an alarm clock. They mean that the alarm clock, when triggered, does not emit any melody, but only vibrates softly.

But in principle, there is no such function in the settings of iPhone parameters, therefore, in this situation, it is only possible to simply reduce the sound and reduce the signal strength.

Another way to solve this issue is to create an empty track and then set it as an alarm. Of course, doing this on the gadget itself will not work, you will have to resort to the help of third-party programs.

If the user wants to ensure that the device does not vibrate, and music plays during the alarm, you just need to turn off this function in silent mode. All night you need to put the device in the same mode.

Methods for turning off vibration VKontakte

Often, Apple smartphone users spend their evenings in in social networks. One of the most popular such networks is VKontakte. But when the owner starts writing it, there is a vibration, which is quite loud. How, in this case, to reduce the sound so that it does not act annoyingly, and so as not to wake up your loved ones? There are two main methods for this purpose, we will consider both of them below.

So, to use this method, you need to go to VKontakte left menu, go down the page and enter the settings. Why do you need to click on the notification item, find the vibration section there, and turn it off.

Well, since the above method does not completely solve the problem, consider another more complete method.

To implement this method, you need to go to the sound settings, select the silent mode, and confirm the installation of the smartphone in this mode. As you can see, this method is as simple and fast as the previous one. But the user after entertainment in social networks should not forget to turn on the vibration back so as not to miss important SMS and calls.

How to Disable Viber on iPhone

IN this application it is possible to use only one of the above methods, since this is not provided for in the settings of the device. Accordingly, to work with Viber, the user should simply use the second method, which we used on VKontakte. All steps are carried out in exactly the same sequence.

After using the Viber app with vibration turned off, you should also turn it back on so you don't miss calls or messages.

Vibration is a great way to announce an incoming call, text message or alarm. After all, vibration can be noticed even in a very noisy room, where sound signals are useless.

But, some users categorically do not like the vibration, and they want to turn it off. In this article, we will talk about how to turn off vibration on iPhone. The article will be relevant for all modern iPhone models. Including iPhone 5, 5s, 5c, se, 6, 6s and 7.

How to turn off vibration during a call or in silent mode

When it comes to turning off vibration, most often they mean the vibration that appears during a call in normal or silent mode. If you also want to turn off this particular vibration, then you need to follow these steps.

Open your iPhone settings and go to the settings section called "Sounds".

The "During a call" function is responsible for turning on and off the vibration that appears during a call. incoming call. If you turn it off, then only the sound signal. And the "In silent mode" function is responsible for turning vibration on and off from an incoming call while the silent mode is running. If you turn it off, then in silent mode, the iPhone will not make any sounds or vibrations at all.

How to turn off alarm vibration on iPhone

Some users are also annoyed by the vibration that appears when the alarm goes off. While playing the alarm melody, the iPhone starts to vibrate strongly and makes a rattling sound, which is not very pleasant to hear, especially in the morning.

In order to turn off the vibration of the alarm clock, you need to open the "Clock" application and go to the "Alarm Clock" section. Next, you need to click on the button with the “+” sign in order to add a new alarm clock and go to the “Sound” section.

After that, go to the "Vibration" subsection.

After that, we go back, select the alarm melody and save the created alarm. As a result, you will receive an alarm clock with a melody, but without vibration.

How to Completely Remove Vibration on iPhone

In addition to all of the above, iPhone has another feature that allows you to remove all vibrations altogether. In order to access this feature, you need to open the iPhone settings, go to the “General” section and open the “Accessibility” section there.

As a result, you will see a function called "Vibration". If disabled this function, then all vibrations will be turned off on the iPhone.