Windows 10 touch input does not work. How to disable the touch screen on a laptop: tips and tricks. Additional software to help

Despite Microsoft's extensive efforts to Windows optimization and programs for using a touch screen, today not all software is adapted for tablets and transformers on Windows 10. Every now and then there are small controls that are very difficult to operate without a mouse. Before Windows 10 came out Creators Update Users could install various applications, such as TouchMousePointer, to display a virtual touchpad on the screen. In Windows 10 1703, the developers have freed us from this need and now the virtual panel is built directly into the system.

How to enable virtual touchpad in Windows 10

The virtual touchpad icon can be placed in the system tray, next to the touch keyboard button and Windows Ink.

To open the touchpad, just press this button. The panel can be moved around the entire screen, and it is closed using the cross at the top right. If you want to remove the button from the tray, just uncheck the context menu taskbar.

How to set up a virtual touchpad in Windows 10

All settings of high-precision physical panels are available for the virtual touchpad. Note that before setting up the touchpad, you need to place it on the screen, and not just activate the tray icon. Otherwise, the panel settings simply will not appear.

You can activate the touchpad to automatically turn off when a mouse is connected, change its sensitivity and cursor speed. You can customize the two-, three-, and four-finger gestures as you wish. Among the available actions, we note switching desktops, changing the volume, opening search or the notification center.

The virtual touchpad will allow you to work with Windows much more conveniently, and now you know how to enable and configure it.

Below are answers to some frequently asked questions regarding pen setup and touch device on Windows 8.1 system.

How do I know if my computer has a touch screen?

Try pressing the tile with your finger home page. If the screen is touchscreen, the application will open. You can also check your current system settings using your mouse:

Calibrating the tablet display

Most problems are caused by driver incompatibility. This is even more likely if touch screen will stop working between you. If you are still not sure, you should wait. Do a system search to troubleshoot and select the appropriate result.

The tool will automatically detect problems and then repair them. However, this is by no means comprehensive and you may need to continue reading. When your touchscreen is slow to respond or records your touch gestures inaccurately, it may require recalibration to get it up to speed.

1. Select the lower right corner of the screen, move your mouse up, select the Settings panel, then click Change PC settings.
2. Select Computer and devices, and then select Computer information.
3. In chapter Computer check the setting Pen and touch input, which determines what type of input the screen supports.

If your device has a touch display, touch input is enabled by default and cannot be disabled.

Disable and re-enable the touch screen

Do a search for the system and select "Calibrate screen for pen or touch." Closest fix: "Have you tried rebooting?" This is a technical tip that throws around a lot, but there's a reason: it works. We explain why. which should have been your first step, disables and re-enables the touchscreen.

This is one of the most simple solutions, but it doesn't always work. In fact, you may find that the problem still continues after rebooting the system. If so, please read. A driver is a piece of software that helps your hardware, such as your touchscreen, communicate with your computer's processor. Thus, touchscreen malfunctions may be caused by a faulty driver.

How do I calibrate pen and touch device settings?

To configure pen or finger touch detection accuracy settings:

1. Enter your query in the search field Calibration, then click the button Screen calibration
2. Click the Calibrate button and then follow the instructions that appear on the screen.

What should I do if, after calibrating the pen and touch device settings, I can’t open the function panels?

If you are calibrating your pen and touch device settings, if quickly moving away from the right edge of the screen does not display the feature bars, it is likely that Windows is not recognizing the edge of the screen correctly as a result of the screen edges being reset during calibration. Try the following steps to calibrate your pen and touch device settings.

You want to automatically search for updated driver software. Follow the wizard if necessary, then restart and check if your problem is resolved. If not, try going directly to the manufacturer's website, looking at their drivers page, selecting your device number, and downloading the latest driver.

When you download this driver, you will be able to extract it and install it automatically. For getting additional information about updating your drivers, check out our guide on how your drivers may be outdated and need updating, but how will you know? First of all, don't fix it unless it's broken!

1. Open the Function Panel using the keyboard shortcut: Windows Logo Key+C. Then click the Search button.
2. Enter your query in the search field Calibration, then click the button Screen calibration at a pen or touch angle to open the tablet settings window.
3. Make sure the monitor in the Screen window matches the screen you want to adjust.
4. Click Reset You may be required to enter an administrator password to confirm your selection.

Unfortunately, not all driver versions work equally well. If it is indeed driver updates that are causing problems, you should try reverting to default. Then go to the Driver tab and select. If you know there is a specific older version of the driver that will work, but you won't be able to get to it through a rollback, on the Driver tab, select Uninstall and then follow the method in step 4 above.

Now you can pick and choose. This has benefits, like improved security, but it can also go wrong. Hopefully our advice above has resolved any issues you had with your touchscreen. If you've never been able to get your touchscreen to work, especially if it's on multiple operating systems, contact the manufacturer for support.

If resetting your device's pen and touch screen settings does not help, try calibrating again by pressing Calibrate, then follow the onscreen instructions. To ensure that the Windows operating system correctly detects the edge of the screen, try gently dragging closer to the center of the screen while touching the calibration points.

For related touch content, if you're having trouble with your tablet screen, check out our guide on how. Some products may not be available in your country or region. Before you look at the solutions below, here are some things you need to know.

The solutions most likely to solve your problem are at the top. If you're having trouble touching only the item you want, try using a surface pen or other capacitive stylus. To find out more, watch. . Use a soft, lint-free cloth dampened with water or eyeglass cleaner, but do not apply liquids directly to the screen.

How to set up touch input on your screen?

If you have two monitors, one of which is touch, the touch input signal may not work as expected. For example, clicking on one monitor causes the cursor to move on the second. To solve this problem:

1. Quickly slide your finger inward from the right edge of the screen, and then click on the Search bar. (If you're using a mouse, select the top-right corner of the screen, move the mouse pointer down, and then click on the Search bar).
2. Enter your query in the search field Calibration, then click the Calibrate button to open the tablet setup window.
3. Click the Setup button, and then follow the instructions that appear on the screen.

How do I change the actions of my pen and touch device?

To change speed, range, and duration:

Solution 3: Install the latest updates

You will need a keyboard or mouse connected to your surface. Sometimes all you need to get your touchscreen working again is a reboot. Your touchscreen may not be working because you don't have the latest updates.

Solution 5: Disable and enable the touch screen driver

You will need a keyboard or mouse connected to your surface, as in the solution. If the two button shutdown doesn't work, try the following.

Solution 6: Reinstall the touchscreen driver

1. Quickly slide inward from the right edge of the screen, and then click on the Search bar. (If you're using a mouse, select the top-right corner of the screen, move your mouse pointer down, and then click on the Search bar.)
2. Enter a phrase in the search field pen and touch input, and then click the Pen and touch button.
3. Tap or select the action you want to configure, and then select Settings.
4. Follow the instructions that appear on the screen.

Solution 7: Reset touch screen calibration

Your surface will automatically download and install the touchscreen driver when connected to the Internet. If solutions 1-6 do not work, recalibrate the touchscreen. After your surface has cleared the recalibration data, test the touchscreen to ensure it is responding appropriately.

Check electromagnetic interference

If we say what multi-touch is in a tablet in ordinary words, then it is its ability to recognize several touches at the same time. So, the first tablets had resistive displays and could only understand one touch (+ there was an imitation of the second). True, this is also considered multi-touch. After the advent of capacitive models, the possibility of multi-touch appeared. At first there was an understanding of only two touches, but now their number reaches 10.

Solution 9: Restore or reset your surface

The culprit could simply be a power strip or lamp on your desk, or it could be something like large equipment or banks of computers. Turn off all other devices in the area and then turn them on one at a time to find out which device is causing the problem. If you don't find the source of the problem, check nearby rooms for more powerful equipment that may be causing electronic interference. If you are still having problems with your touch screen, try restoring or resetting your surface in this order.

1. Device management
2. Special Applications

The system uses multi-touch to control widgets and other system applications. Much more possibilities are implemented in third-party applications. For example, Google Maps perfectly demonstrates the capabilities of multi-touch. With just two fingers you can go anywhere on Earth.

Solution 10: Submit your surface for service

If the touch screen still doesn't work after these steps, your surface needs servicing. If your touch screen doesn't respond correctly to touch, try these solutions. Section “What to do if the surface screen is damaged.” . Section "Cleaning and caring for your surface." If the touch screen still does not work properly, go to Solution 2.

Solution 2: Reboot the surface

To complete the remaining troubleshooting steps, you will need a keyboard or mouse connected to your surface. Here's how to reset your surface when your touchscreen isn't working. If the touch screen still does not work, go to Solution 3.

Interesting technology implemented in Windows systems. You can program your own gestures. That is, to give each movement almost any function or option.

But in games, multi-touch reveals its full potential. They often use a joystick on which you need to press several buttons at the same time. For example, take the game Mortal Combat, where you need to press different combinations of buttons to achieve certain hits, combos and fatalities.

Resetting your touch screen settings

The touchscreen does not need to be recalibrated, but if someone recalibrates it, it may affect its performance. Here's how to check the calibration and restore the factory default calibration if necessary using your keyboard or mouse.

Solution 4

Enter calibration, use the arrow keys to highlight "Calibrate screen for pen" or "touch input" and press Enter. Press the Enter key until the Yes button is selected, press Enter, and follow the onscreen instructions. After your surface has cleared the recalibration data, check the touchscreen to make sure it is responding correctly. Go to solution 4. . Here's how, using your keyboard or mouse. If the touch screen still does not work after you have installed Latest updates, try Solution 5.

How to check multitouch on a tablet? It's easy to check multitouch. There is a primitive way. Right at the inspection site, launch the camera and take a photo. Open it and, by moving two fingers apart and sliding on the display, see if the picture enlarges/shrinks.

To check for more than 2 touch points, download one of the special programs. For example, Multi-Touch Tester. It is small in size and immediately determines the number of possible touches. In addition, you can personally see the result by touching the display again.

Solution 5: Check for EMI

Sometimes other electronic devices can interfere with the touch screen. For example, they may cause the cursor to move unexpectedly. The culprit could be as simple as a nearby power strip or a lamp on your desk, or it could be something like large pieces of equipment or banks of computers.

If your touchscreen problem only occurs in certain areas, you may be getting electronic interference. If you think your touchscreen is experiencing interference, turn off devices in the area where you use your surface until you can determine the source of the problem. If you do not find the source of the problem in the room where you are using your surface, check adjacent rooms for more powerful equipment that may be creating electronic interference. If the touch screen is still not working properly, try Solution 6.

Calibrating the tablet display

Calibration is needed so that your gadget responds adequately to the touch of your fingers. An uncalibrated device behaves as follows. For example, you write an SMS, press the letter “A”, and the display shows the letter “K” or “E”. Not very convenient, right?

Solution 6: On/off switch

Use this two-button stop process to ensure your surface is completely disabled. After your Surface turns off, press and hold the Volume Up button and the Power button at the same time for at least 15 seconds and then release both. After you release the buttons, wait 10 seconds. Press and release the power button again to turn your surface back on. Use the arrow keys to highlight Shut Down and press Enter. . If the touch screen still doesn't work, try Solution 7.

Calibration in Windows

Since the tablets contain several Windows options, then there are several ways to calibrate the screen. Or rather, there are several ways to get into a special application for this. In inferior Windows (such as Windows 8 CP), you need to open the general settings. Almost at the very bottom of the window there will be a treasured button. In full versions, the option is located in screen personalization.

Solution 7: Restore, refresh, or reset your surface

If you're still having problems with your touchscreen, try restoring, refreshing, or resetting your surface, in that order. Restoring your surface is a way to undo recent system changes that may be causing problems. Restoring your Surface doesn't change your personal files, but it may remove recently installed apps and drivers.

Other apps and your settings will disappear. You can reinstall them after the update is complete. Reset supports apps installed on your Surface. If you have trouble accurately selecting objects on the screen using touch, you can calibrate the screen alignment. If your touchscreen is not calibrated well, you may not be able to press the Calibrate button. Find the orientation lock on your tablet. If orientation lock is enabled, the screen will not rotate between portrait and landscape orientations. The screen displays lines all the way around, forming a box near the edge of the screen and a second box inside the first half inch from the edge. Lines connect these cells near each corner. The result was 16 intersections. Starting at the top left corner, use your finger or stylus to tap each intersection, which displays two short black lines that form a crosshair. If this touch is accepted, the crosshair will move to the next intersection to the right. If not, click the previous intersection again. As the crosshair moves, tap the highlighted intersection from left to right, down, and then left again. The process takes much more time than reading. What to do if you don't have a mouse? Once you have selected each of the 16 calibration points in turn, a window will appear asking if you want to save the calibration data.

• Then select Calibrate Screen for Pen or Touch.
• Ignore the order selection option where your screen rotates.

My dissatisfaction with changes in Windows 10 compared to Windows 8 that relate to touch controls. Two weeks have passed since that moment, during which I upgraded the family’s ultrabook with a touch screen to “ten” and tried Windows 10 in the process of setting up my own account - as I already said, I strongly recommend installing Windows 10 exclusively from scratch, no matter what I advise “ Microsoft", famous bloggers and other respected people.

In the end, my experience was better than I expected. Yes, I still like the “immersive” IE more than the “mouse” Edge. Yes, there are still not enough “miracle buttons” that could become a new “menu bar”, a single place to access printing, search, data exchange and settings functions for all new programs. Yes, the new “Start”, even when expanded to full screen, still does not provide the convenience of the initial Windows screen 8.

It's not all that sad. And in many places, on the contrary, there is reason for joy.

The usual finger gestures remain. Swiping down from the top of the screen brings up a title bar with window control buttons. Swiping from the right edge brings up the “Notification Center” - a definitely useful innovation in the “top ten”. In addition, at the bottom of this “center” there are several buttons for frequently required actions, as in Windows Phone 8.1, which, of course, is not a “miracle button,” but can also be useful.

And swiping from the left edge of the screen brings up a new task switcher. It doesn't look as impressive as switching programs in Windows 8, but it is definitely more functional. Unlike its predecessor, it always shows which program you are switching to.

For tablets, touch screens, and in general for anyone who wants to bring the behavior of Windows 10 closer to the “eight”, there is the so-called “tablet mode”. It forces not only “trusted” applications to fill the screen, but also desktop applications. It doesn’t always look pretty, especially for programs that are not designed for full screen mode, but for working with “classic” programs on a tablet it’s quite tolerable. He also cheats appearance some other elements. Thus, the taskbar when tablet mode is turned on removes all traces of programs, leaving only system buttons home screen, search, task switcher and back button, and leaves only system icons, such as battery indicator and clock.

From time to time, laptop users think about how to disable the touch screen on a laptop. This term usually refers to touchpads - touch-sensitive panels on devices that replace work computer mouse. Only in some laptop models the touch screen is actually a display that responds to “manual” commands. Therefore, let’s take a brief look at disabling them. Let's focus on disabling touchpads on laptops.

Methods for solving the problem

How to disable the touch screen on a laptop?

The user can:

• deactivate the touchpad using hot keys;
• disable the control through the OS settings;
• use additional software and drivers to implement the task.

Which is better to choose? There can be no clear answer to this question. For example, not all laptops have touchpad control buttons. And therefore, the first option will not work in the current situation, no matter how convenient it may be considered.

Lenovo and keyboard

How to disable the touch screen on Lenovo laptop? Devices from this company usually have hot keys.

Most often, users are offered the following combinations of buttons:

• Fn + F5;
• Fn + F6;
• Fn + F8.

Important: if you need to disable the touch screen on Lenovo, and not the touchpad, you can use the combination Fn + F9 or F9.

By the way, the Fn + F5 combination works on most laptops. For example, on Samsung or Toshiba.

Asus and Acer

How to disable the touch screen on a laptop? You can refuse to use the touchpad on Acer and Asus without any problems by using the keyboard.

If we are talking about Acer, you should press Fn, and then, while holding the button pressed, click on F7. The touchpad will be activated in the same way.

How to disable the touch screen on Asus laptop? Usually the combination Fn + F9 works flawlessly. Just look at the labels on the buttons. If one of them has a picture with a crossed out touchpad, you can use this key.

HP laptops

Unfortunately, HP laptops do not have separate buttons to turn off touch control, but the user can try to cope with the task like this:

1. Double-tap the top left corner of the touchpad.
2. Hold down the left corner of the touchpad for about 5 seconds.

Most likely, one of these tricks will work. If not, you will have to use the built-in capabilities of the OS.

Windows 10

How to disable the touch screen on a laptop if the user is running Windows 10? This guide will help:

1. Open the "Options" menu item.
2. Go to "Devices" and click on " Touchpad".
3. Switch the toggle switch to the "Off" state.

That's all.

Additional software to help

Some laptops have Synaptics touchpads. This can work to the user's advantage. Synaptics has a number of separate drivers and a specialized application for configuring sensor parameters.

To disable the touchpad, you need to:

1. Go to "Control Panel" - "Mouse". To do this, the “Small icons” option must be selected in the information display settings.
2. Look at the "Settings..." section, next to which the Synaptics icon is drawn.
3. Select the touchpad and click on the "Disable" button.

Important: in this window, users will be able to configure the operation of the sensor. For example, the ability to disable the panel using individual keys or after connecting a USB mouse.

Mobility Center

How to disable the touch screen on a laptop? The following technique is not suitable for everyone. Some laptops display touchpad and touchscreen settings in Windows Mobility Center.

1. Right-click on the battery thumbnail in the system tray.
2. Select "Windows Mobility Center".
3. Find the blocks allocated for sensor control.
4. Set the value to "Disable" in the appropriate sections.

Standard solution

How to disable the touch screen on a laptop? The last trick works for all laptops.

Instructions for disabling the sensor in Windows look like this:

1. Open to anyone in a known way"Device Manager".
2. Expand the "Mice and Others..." tab.
3. Find the touchpad/touch screen.
4. Right-click on the corresponding menu item and select the “Disable” command.

Yesterday, and completely unexpectedly, Microsoft, which is available for download right now. This version brings a lot of improvements, especially when compared to the preview released last year, and almost all the changes were made based on feedback with users. Build 9926 comes with an improved Start menu, Cortana integration (does not support Russian), and new apps including Photos, Maps, Settings, and more.

One of the main features of this build is its Continuum operating mode (or simply put, tablet mode), which instantly improves the usability of the operating system on devices that support both touch and keyboard input. In other words, for convertible devices, the so-called “transformers,” there are two operating modes: tablet mode and normal desktop mode. In tablet mode, the operating system interface becomes convenient for working with it using the touch screen.

On convertible devices, this mode will be enabled automatically if the user detaches the keyboard, or converts the device for use in tablet mode (if it is a device such as Lenovo Yoga). When you reconnect the keyboard, it turns on again normal mode.

On other devices (with or without touch support), you can enable this mode manually. To do this, open the Action Center and click the "Tablet Mode" button

Alternatively, open the new Settings app (aka Settings) and go to System. In the menu on the left, find the “Tablet Mode” section and select the “Use Tablet Mode” option in the “When you sign in” section. Here you will find various tablet mode settings.

After this, the operating system will instantly switch to full-screen mode, i.e. any windows and Start menu will fill the entire display area.

In tablet mode, you can also use gestures to move between apps and operating system.

Have a great day!