Let's consider possible variant restoration of the device, which is not helped by the usual “soaking”. That is, “soaking” for several days does not change the situation. One or more colors have not been printed and continue to disappear.
For example, let's take Epson printer L100, which we had been trying to restore for a week before. The problem with the device is that the black color disappears.
What to do if your inkjet printer is printing the wrong colors
This is likely due to the ink cartridges or their installation. Prints always have a blue tint and no other colors appear. However, assuming the printer has previously printed these cartridges correctly, this is most likely due to a clogged print head.
Your printer has a utility called Nozzle Check that will check the nozzles in the print head and help you diagnose the problem. If you can't find it software, you can also run the nozzle check directly from the printer using the menu buttons.
Let's start restoration. Let's try the so-called “pushing” method.
In order to push it through and not make too much of a mess inside the printer, take a small cloth. Let's fold it to the size of the place where we will then move the printer head and where the ink will drain during the cleaning process.
Now, in order for us to “unpark” the head, we move it to the right all the way. You also need to turn the gears that are located on the upper left edge of the head towards you.
Users of other inkjet printers will find similar tools, as this is a common problem with an inkjet system, especially if you haven't been printing for a while. Do not use this feature, however, as it can consume a very large amount of ink when cleaning the nozzles.
This understandably irritates our customers quite a bit, so we went and got the answer for you! If the ink is not in the tubes from the head to the cartridge, air will be sucked in and therefore damage the print head. This is because the nozzles are located in the print head and not in the cartridge.
You need to turn it once or twice.
After this, carefully move your head behind the train to the left. At the same time, hold the cloth so that when you move your head, it does not gather into an “accordion”, but neatly ends up under your head.
We need to get paint tanks. To do this, unscrew the lid. In our case, it is secured with two bolts. If you have another similar device, the cover may be secured with three bolts, or there may be a different configuration.
This air will ruin the vacuum effect the print head needs to print, meaning your print head will be at risk of never printing again. Also, if any air is allowed into the above tubes from the head to the cartridge, any remaining ink will coagulate.
Will it print black without tearing my printer?
Essentially, whether you think this is true or not, there is an issue and something to consider. As a result, you can print anything. It really makes you annoying and even drives you crazy if you don't know how to fix the problem at all. Please try them one by one until you fix the error due to different reasons for the error.
We remove the cover to gain access to the tanks (reservoirs) with paint.
In order to remove these tanks, we press on the latches that hold them in the grooves. The latches are located on the far side of the tank.
Gently press the latches, the tanks will pop out of the grooves. Then we need to raise them. We hook them with something, take them out and put them aside.
Reasons why Epson printer does not print black
The above steps may solve this problem, but if they don't, or you are not sure about playing with the drivers manually, you can do it automatically. Then find the marked port with a √ label. You can also scan your files to your device or send via email. You can even scan and save files or send via email. You can post up to 10 pages.
Version 0 supports the following features. Perform product maintenance such as cleaning the head and checking the nozzles.
- Pure online storage services.
- Printing web pages.
We are interested in black color. Therefore, we take a tank with a black color and make sure that there is no air in it. Air may also cause printing problems.
If you have air there, you will need to pump out the air from the reservoir with something and refill it with ink.
List below for supported products.
- Seal, Email or Save file.
- Store the file in online storage.
Epson inkjet printer does not print in black: repair
If your printer is selected, click Print. If your product is not selected, tap, select your product, then tap Print. Note. Before you save the file, you will need an online storage service. Tap Photos or Documents, then select a photo or document.
If everything is fine here, then proceed to the next step.
We take a special syringe with a rubber band. We must put this rubber band on the fitting where the ink reservoir goes. The elastic band is taken from a diaper of the same device.
If there is no such rubber band, then you will have to come up with something. You can take it from under the system. It seems to fit too, or look for a similar elastic band.
Turn on the scanner. Select your scanner, then click Finish. If you don't see your scanner, make sure your mobile device is on the same network as your scanner. Turn on your device. Select your product, then click Done. If you don't see your product listed, make sure your mobile device is on the same network as your product.
- Make sure there is no paper jam in the printer.
- Make sure paper is loaded correctly in the printer.
- Make sure the correct paper size is loaded in the printer.
Now we put our syringe with an elastic band on the fitting. The process is quite inconvenient, so to make it easier, you can use improvised means, such as scissors or tweezers. We dress very tightly and all the way.
Let's start pushing. It’s better to play it safe and tightly hold our rubber band on the fitting with something. You can use the same scissors.
Each staggered horizontal and straight vertical line must be complete, with no gaps in the dot pattern. If there are gaps in the dot pattern, continue with another loop. Perform up to four cycles if necessary. If the nozzle check does not print completely, and if cleaning the head does not help the nozzle pattern print completely, try replacing the ink cartridge. You can also turn off the printer and wait overnight to soften any dried ink, then try cleaning the print head again.
However, there may also be a technical defect or the ink cartridge is too old. Otherwise, the devices will not be able to communicate normally - in this case, jobs and signals that are sent to the device cannot be received. Open the first one and go to the "Devices and Printers" menu. . If the printer does not work or is older, you should buy new printer. Good printers are pretty cheap right now - take a look at the most popular models here.
We do this because when pushing, a lot of pressure occurs. And if everything is clogged there, then the liquid has nowhere to go, the rubber band can come off and splash everything around.
We squeeze the rubber band and squeeze out all our flushing liquid. Squeezing two to three milliliters of liquid is enough.
If flushing is difficult, it means the nozzles in the device are clogged - this is a bad sign.
If all these tips don't help, contact her. Customer service helps you with big problems and may advise you to exchange the device. This includes the device number and model description so that the employee can directly provide assistance.
Several small problems may be caused by your printer not working. In most cases, the printer does not print due to a bad connection. Turn off the printer or unplug the device from the power source for a few seconds. Last but not least, this may be due to an empty cartridge that is not printing.
The meaning of this washing is as follows. Particles of dried ink inside the nozzles that cannot be dissolved can be squeezed out under the pressure of the washing fluid and your machine will print normally again.
After we have pushed all this through, we install our tanks back.
You need to be careful when putting them back, since the tanks should be placed tightly to the edge of the grooves closest to you. Because if the tank is placed on the far edge, it will fit, but not tightly in the grooves and can break the holder.
Even if color is not required for printing, some printers will only print when there is enough ink in all cartridges. If your printer does not appear or is set to Offline, it may not be connected correctly. To test, disconnect the cable from the printer to prevent damage to the cable. Open Hardware and Sound > Devices and Printers. . And now in almost every private home. In everyday life, it takes care of printing applications, forms, photos and other documents.
Choose the right printer
However, very often there are days when the printer categorically refuses service. In most cases, the cause of the error should resolve itself so that the printer does not need to be repaired. Before you can print on your computer, the printer must be configured and selected in your applications. This can lead to conflicts if multiple printers are detected on the system. Under installed printers the correct one must first be selected. To free up a fixed printer, it is often worth setting the corresponding printer as the default printer on the system.
After installing the tanks, screw on the lid and move our head to the side.
We will notice that our rag will be covered in washing liquid. Carefully take it or another cloth and once again blot the place where it was lying and any possible liquid leaks nearby.
Let the printer dry and the next day you can test it and see if the problem is resolved.
A continuous connection is a must for printing. If the reason is a lack of connection, you need to check the plugs and cables to make sure they are connected tightly. To check if there is a connection, you can go to the “system control” of your computer. "Ready" should be set to "Printer". This means you can now print if there are no other errors. When network problems the computer usually provides the necessary instructions as to how they can be solved.
Check the ink or toner levels
In this case, it is natural to buy new ink cartridges or new toner. It is important to pay attention to the correct sizes. If you buy your ink or toner directly from the manufacturer, it is safe. However, there are cheaper as well as quality alternatives such as choosing compatible ink cartridges or toners. This guide will provide you with helpful instructions. Sometimes color printers won't print when only one cartridge is empty. Of course, this must also be ensured in the paper warehouse.
If the color disappears again during printing, the problem will most likely be in the fine ink filter. It's clogged and the ink just can't keep up. the required speed pass through this filter to the head.
When printing large volumes, the problematic color will disappear. For small volumes, the problem may not be noticeable.
Try cleaning the print head using the printer software
Is there enough paper in the tray, and if so, is there enough paper on the right side? Typically, ink levels are displayed on the printer or computer screen. However, it may happen that the ink or toner low warning message is not displayed. However, you can even check it in the printer tool. Outdated driver no longer sends commands, which means printing no longer works. To check if the driver needs to be updated, open the Devices and Printers category in System Management.
To avoid problems with printing on an Epson printer, you should purchase consumables only from official dealers and trusted manufacturers, for example, from Master Service. We diagnose and repair printers with any malfunction.
Most Epson printers are equipped with a separate print head. The ink is located in a separate part of the printer and serves as a kind of storage. As commands are received, ink is drawn from the front of the printer into the device and applied to the paper.
One of the frequent breakdowns in which people turn to service center, is that the Epson printer does not print black. It is possible that other colors appear on the screen correctly, but black ink does not appear.
What to do if all else fails?
The printer must be turned on during this process. For "Hardware" there is a subcategory "Properties". There you can finally click on "Driver" and get all the information you need. You may have to update the driver manually. This identifies the problem. Here you can quickly reach the desired category.
Sources of images in this article. However, if this method is successful, it helps temporarily. The cap assembly that waits for the head. The rubber wipers and bearing pads are so tangled that it won't last long before the head lubricates again and finally sticks or dries out.
Before making repairs, you should diagnose and understand why the epson printer does not print in black.
Reasons why Epson printer does not print black
Of course, only qualified service center technicians can identify the cause of the malfunction and fix the problem. However, users will also be interested to know about the most common causes of problems why the Epson inkjet printer does not print black. Among them:
Unfortunately, the colored head can also be attacked. Wipe the heads, in most cases only the nozzles become dirty. In addition, you need to turn your heads - to reach them correctly. The feed rollers are difficult to reach on all low-cost inkjet printers if they are dirty. Therefore, cleaning is often difficult. Paper dust gets caught on the rolls, causing them to draw poorly. The printer then starts printing too early and sprays ink onto the transfer roller, which distributes the ink throughout the paper path.
What all cheap inkjet printers have in common: a set of cartridges usually costs more than the entire device! These cartridges are also more expensive than professional printers. Manufacturers make more money with supplies - not with printers. Unfortunately, I don't have an exact answer to this question. Eventually the level will reach zero and the printer will stop printing even if it is in the middle of the sheet. This behavior is very annoying because by pressing the ink button to lift the printer lid and eject the cartridges, the printer ejects a sheet, prints in half, and then continues printing from that half onto another sheet - making the print unusable.
- Use of low quality Supplies. Sometimes incorrectly selected cartridges or combining cartridges from different sets leads to the printer not working correctly;
- Using ink that is too thick or thin will cause the nozzles to become clogged;
- For some Epson printer models, insufficient ink levels in the cartridges cause a malfunction. In this case, the black color may be absent or look very pale. It turns out that the printer does not print in black but prints in color;
- The print head is clogged. Only specialists can cope with this problem.
- The printer is not configured correctly. It may not be installed drivers, or not configured correctly, or the printer itself is not configured correctly in the settings. This is often the reason why the Epson printer does not print in black.
Epson inkjet printer does not print in black: repair
Manual cleaning is necessary when using the device for a long time. Only an experienced craftsman can do it efficiently.
In order to consult with a specialist, just call our service center and arrange a convenient time for a visit. Proper cleaning of your printer will extend its lifespan by several years. People come to us especially often because the Epson l120 and r300 printers do not print in black.
Highly qualified specialists, a competent approach to solving each situation and the availability modern equipment allow you to repair and cope with the problem when a color printer does not print black.
