HP laserjet 1020 does not print windows 7. What if the hp laserjet p1102 printer does not print? The printer cover is open.

Any of the peripheral devices that facilitate many printing tasks can fail, which can lead to a decrease in the quality of processed documents. And if the HP LaserJet P1102 printer has stopped printing or is printing faintly, there are a series of steps you can take to help troubleshoot the problem.

Some device models from the same manufacturer (for example, HP LaserJet 1018, HP LaserJet 1020, HP LaserJet 1022, HP LaserJet p1102) may display the same errors. Why this happens can be explained by the similarity of printing technologies. However, the problem will need to be solved in each individual case on an individual basis.

A checklist with sequential troubleshooting steps allows you to rule out different reasons why your printer is not printing, one by one.

Initially, if the HP LaserJet p1102 does not print, you need to check all connections. If the printer is connected to the network, try starting it by turning on the start button. Next, make sure that the device is connected by cable or wirelessly to PC. Reliability of this connection should also be checked. Then you can check the connection settings (compare the routing protocol of the device and the access point).

In cases where the printing device with wireless connection does not print, you need to make sure the connection is secure. If the printer is searching, the light will blink. In this case, you can wait until it connects to the specified access point, after checking the settings and connection path. If the indicator does not blink, this may indicate a lack of wireless connection. For such situations, you can force the device to connect or run a program that will help you configure and connect. To check how the printer prints, you can then print a document with configurations.

If the unit does not print the specified page, you will need to remove it from the system, after which you should try installing it again.

If these steps are not enough for the printer to start printing, you can contact the Consumer Support Center, indicating the device model.

There are other reasons why a printer may stop functioning. First of all, this incorrect position paper in the input tray. Perhaps this is why the device does not print. It is also necessary to establish what are the technical characteristics of the paper used and whether it meets the requirements of use Supplies to the HP LaserJet p1102.

On the technical side, the printer may stop printing if:

• Inappropriate software is installed;
• the print driver is not installed;
• The driver installed does not correspond to the device model.

In such cases, you can check why the device failed by trying to print a configuration page. If the print is not reproduced, you should perform the same steps from another PC on which the appropriate drivers and software are installed.

How to reinstall the driver?

Having ruled out hardware problems (unstable line voltage, blinking indicator lights, error messages, etc.), you should try reinstalling the driver.

If it worked before, but now it doesn’t print, you should find a new driver, download it to your PC and prepare the printer for manipulating the drivers. First, the printing device is disconnected from the computer. Next, through “Start” you need to open the “Devices and Printers” section and remove from it the driver installed for your printer model (HP LaserJet p1102). After this, you can run the driver file that you downloaded previously and install it, following the wizard’s prompts.

After connecting the printer to your PC, try to print the document. If the device does not print again, you can reinstall the driver again or check through operating system Why did the printer stop printing?

If the device runs Windows XP, Vista, Windows 7, 8

If you have problems with an HP printer that interacts with Windows XP, Vista, Windows 7 or Windows 8, you can use a special program developed by the device manufacturers Hewlett Packard– HP Print and Scan Doctor. It was created to support users of HP devices (for printing, scanning).

You can also check why your printer is not printing by checking the print driver configurations. That is, if by default you have one device installed, and you use several, you need to check each time that the configurations of the access point and the device match.

If the printer does not print, you should check that the application is functioning correctly. If you cannot print a document from the specified program, you need to check that it is working correctly. To do this, try sending a document for printing from another program. For example, after typing a few lines in Notepad, try to print them. If the operation went without problems, then the original application is not working correctly.

Printer malfunctions may occur due to insufficient virtual memory. In order to print a given document, the HP LaserJet p1102 printer first processes it in a virtual area on a PC. If this area is not enough (at least the stated 200 MB), the printer will produce blank sheets of paper. To make the printer print again, you can increase this volume through the OS settings (the procedure may differ for each of them).

If your device is running Mac OS X 10.6, OS X 10.7 Lion, OS X10.8 Mountain Lion

If a printer that interacts with Mac OS X 10.6, OS X 10.7 Lion, OS X10.8 Mountain Lion does not print, you must also rule out connection problems, problems with the USB cable, and check that the “print queue” function is disabled.

To return the printer to operation, you can delete and resume the device in the list of printers. To do this, the Apple sign opens and through it the user is taken to the “Printing Settings” section. Having found the “Print and Fax” section, go through it to “Printers” and select “Your printer” (HP LaserJet p1102). After removing the device (“-”), disconnect it from the PC and restart the latter. Next, you need to follow the same procedure and connect the device again by pressing “+”. Try printing the page again.

If print quality has decreased

For situations, it is worth double-checking the print settings with the parameters of the media used. Also, the reasons for pale printing may be hidden in the components of the cartridge and the characteristics of the toner.

HP monochrome printers often experience printing problems (the printer prints faintly) due to wear of some parts of the cartridge. First of all, these are the dosing blade and the magnetic shaft, which it is advisable to change at the same time in order to extend the service life of the consumable. To understand why the device prints faintly and whether such components need to be replaced, you can send a document for printing that is completely filled with gray shading. If the result is not satisfactory, replace the specified parts. After the procedure, the result should improve significantly.

Faded print from the printer can be corrected by replacing the drum unit. But this manipulation will be effective if the new drum agrees technical specifications, declared by the manufacturer, is able to more actively attract toner than the previous drum or the drum wear cycle has almost reached the end.

Below is a helpful video:

HP LaserJet 1018 are facing various kinds of problems. Some of them are resolved quickly, as if on their own. But eliminating other faults requires a certain amount of time, sometimes quite a long time. If your HP LaserJet 1018 printer does not print, does not install, does not see the computer, or other problems occur, in particular, the printer does not pick up paper, chews paper, prints blank sheets, as well as other printer errors; in this article we will look in detail at the main causes of their occurrence, as well as solutions.

HP LASERJET 1018 WILL NOT PRINT

There is a paper jam in the printer

Typically, if a printer gets a paper jam, it will stop printing. At the same time, the lights and indicators begin to blink. At the same time, you can see the corresponding error message on the monitor screen, as well as suggestions for troubleshooting. To fix the problem, simply follow the on-screen instructions.

But before you do this, use one simple advice. . What does this mean? It's simple. Unplug the printer completely, wait a few seconds, and turn it back on. In some cases this method helps. The printer restarts and all of its components restart. Therefore, the paper that is stuck there may come out by itself.

If the method does not work, for example, too much paper is stuck in the printer, then we use the services of an assistant on the monitor screen. But there may be some problem here too. The fact is that such an advisor does not always appear to help solve the problem with paper jams in the printer. For example, the computer is not installed special program HP LaserJet 1018. In this case, You must remove jammed sheets from the printer yourself. To do this, you need to open the printer cover, as well as all other elements that provide free paper exit. There is no need to completely disassemble the printer.

Then, using gentle movements, remove the sheet or sheets, if there are several, from the printer. When removing paper, be careful not to forcefully pull on it to avoid tearing it off. In the worst case, if the sheet accidentally breaks and a piece of paper remains in the printer, carefully use tweezers or a similar tool to grab the edge of the paper and pull it towards you.In any case, until the paper is completely removed from the printer, it will not work. And even if it does, it becomes unsafe, in terms of possible failure of important printing elements of the printer.

Paper jam in printer

In addition to the problem with jammed paper described above, we can only add that when a message is displayed on the screen, its text will be approximately related to a paper jam in the printer. And the same thing, if the HP LaserJet 1018 printer says paper jam, then this same paper needs to be removed from it. Printer printing naturally pauses, and The printer will not print until you remove the paper..

The difference between this problem and the previous one is that, if in the first case the paper can still be somehow removed without disassembling the printer, then in the second case the paper jams, breaks, that is, it curls up to such an extent that even manually it is not always possible to remove her from there.

Why does the printer jam paper?

We described above how to remove paper from the printer. Here we will look at the reasons why jams actually occur and why the printer jams the paper.

1. The paper in the printer is magnetic

   This problem often occurs with sheets of paper that have been fed through laser printer and received some electrostatic charge. For example, you need to print a document on both sides of the sheet, that is, double-sided printing. In this regard, electrified sheets are magnetized to each other. To avoid this, take a stack of printed sheets, flip through them all, tap the edge on a hard surface, wait a while, and then start printing again. If in the process of work you often have to deal with double-sided printing, in this case, a regular antistatic agent, which is used for clothing, can help.

2. Printer paper sticks together

   As in the case above, if a number of sheets have been printed before, the printing element heats up, causing the sheets of paper to heat up. And if you continue printing on the reverse sides of the same sheets, the sheets stick together. Flipping and tapping the sheets will help correct the situation. Moreover, when you leaf through the sheets, to be sure, place the stack on the table and pull one sheet. If another one is following it, it means the sheets are sticking together and it is too early to continue printing. Go through the entire stack of sheets again. Blow on them or shake them.

   Also, if you load too much paper into the tray, the printer may accidentally pick up several sheets of paper, causing them to fail to pass through the print element and become jammed. The sheets may appear to be stuck together. As stated above.

3. Bad printer paper

   Question: is it worth talking about this at all? I think the user knows what he is getting into when he inserts old, wrinkled sheets of paper into the printer in the hope of printing a document normally. And why? Of course, if the importance of such a document is indifferent, then you can print whatever you want. But on the other hand, imagine that you need to test the printer and for this we turn on test printing, and select paper that has already been used before - draft. Why not? But the best advice would be not to use such printing techniques, so as not to subsequently break the printer due to some kind of problem. unsuccessful attempt remove the paper from the printer.

4. The paper is not suitable for the printer

   Another option, also quite common. The fact is that there are different paper formats, different paper quality, size, weight, etc. If the printer jams the paper, perhaps you are using paper that does not meet the requirements!? Too thin or, conversely, too thick. Just check this and replace the paper if necessary.

5. The paper was inserted unevenly into the printer

   There is a situation when you accidentally put paper unevenly in the tray and the printer also fails to grab it. It happens that the printer itself grips the paper unevenly. Perhaps he was just tired!? Cool down the printer and let it rest.

How to remove paper from the printer

In principle, this has already been written above. In order to remove paper from the printer, you must open the printer cover, as well as all closing elements that allow paper to exit. Using caution, remove the paper using gentle movements. There is no need to pull it out sharply, as this can tear off most of it, after which it will be much more difficult to remove the remaining paper.

Important! Very often, users with such a problem When you try to remove the paper from the printer, it comes off. This happens like this: we grabbed one end of the sheet - it goes with tension. As soon as the paper seems to have gone, we, satisfied, begin to pull harder on it, as a result of which the sheet comes off and remains of the paper remain in the printer.If this happens, use tweezers or another similar tool, grab the edge of the sheet and pull towards the paper exit.

The printer cover is open

If any printer, including the HP LaserJet 1018, has the lid is open or not tightly closed, the printer will not print. Sometimes even a micro-hole in the lid can cause the printer to stop printing. The reason may be failure of the closing element or locking devices. And therefore, while any of the covers is open, the printer does not print.

In order to correct the situation, it is necessary to check all doors, covers and other closing elements. If necessary, open them and close them tightly.

Problem with cables

The HP LaserJet 1018 printer is connected to the computer via a USB cable. Often such cables are short-lived and therefore often fail. To check the functionality of the cable, you must use another cable. To be sure, connect the problematic USB cable to another printer. If after connecting the new cable the printer starts printing, then the problem is in the USB cable.

Also, it would be a good idea to check the network cable and power cable. These cables do not fail so often, but still, in a similar way, we check its performance and draw the appropriate conclusions.

PRINTER DEFAULT

It happens that the HP LaserJet 1018 printer is installed, but when you try to print, it doesn't print, is silent. If you have another printer installed on your computer, it is quite possible that HP LaserJet 1018 is not installed by default. You can check this in the list of printers, for which you need to open Control Panel and choose Devices and Printers. The printer with the green checkbox is the default printer, which means that all programs and applications will send print jobs to this printer by default.

Computer news, reviews, computer problem solving, computer games, drivers and devices and other computer programs." title="programs, drivers, problems with the computer, games" target="_blank">Компьютерная помощь, драйверы, программы, игры!}

CARTRIDGE OUT

A common occurrence when The cartridge is out of ink or The printer is out of cartridge. Therefore it needs to be replaced. This is exactly what printer manufacturers dictate. Just buy a new cartridge. However, there are craftsmen who can bypass this problem using various printer firmware.

HP LASERJET 1018 DOES NOT SEEN THE COMPUTER

Faulty connectors and wires

If your printer HP LaserJet 1018 does not see the computer , not determined by the system, there may be various reasons for the fault. If in the case described above, the computer somehow finds the printer, then in this case, with the same problems with the wires, the printer does not see the computer at all and does not react in any way to any attempts to connect it.

The fact is that in the previous version, the computer sees the printer partially, that is, it sees it, but this is the only thing it is enough for. The cable is old, does not pull, and therefore occurs in the printer HP LaserJet 1018 errors. In our case, the cable completely failed. Only replacement will help. Fortunately, their prices are not so high that it can be replaced.

HP LASERJET 1018 NOT WORKING

If your printer HP LaserJet 1018 not working , stood up, not only stopped typing, but became so worn out that even won't turn on , the solution here is only possible in one of two ways, provided that independent attempts to repair the printer are unsuccessful - take the printer in for repair or buy a new one. If the printer is new, under warranty, you can use warranty repair services.

Here are few of the problems that HP LaserJet 1018 users may encounter. If you do not find the answer to your questions, please ask them in the comments. Or you have your own solution, you yourself fixed the HP LaserJet 1018 printing problem, as well as other problems, please share them. After all, perhaps someone needs help right now, and it is your solution that can help. Good luck to all!