Each of us has heard at least once “put your phone into tone dialing". And I was sure that to do this you need to press the "*" key. However, this manipulation is not equally effective for all phones.
You will need
telephone set
instructions for using the telephone
Sponsor of the placement P&G Articles on the topic "How to transfer a radiotelephone to tone mode" How to calculate the extraction power Why the Decembrist does not bloom How to replant a cactus
Instructions
You can check whether the tone mode is turned on by pressing any button on the phone while the handset is off-hook. Your device may already be in touch tone mode. Listen to the sounds it makes when dialing. If these are short signals, then the mode is really tone mode. If you hear short clicks in the telephone handset, the dialing is pulsed. This means you may not be able to take advantage of some interactive features.
To switch some phones to touch tone mode, you don't just need to press a key. You need to hold it for 1-2 seconds. Try holding the "*" or "#" button for a while. Then look at the screen of your phone radio. The corresponding inscription should appear on it: “tone” or “t”. If the message does not appear, listen again to the sounds that the phone makes when you press the buttons. Some telephones have "tone" or "t" and "i" keys/switches. In such phones you just select desired mode(pulse/tone). Switches can be located on the side or bottom of the base/handset. There are many phones with an individual way to switch to tone dialing mode. For example, sequential pressing of the keys "*" "-" or "-" "*" "-". Tone mode is enabled.
If none of the combinations helped switch your radio phone to tone dialing mode, carefully study the menu of your device. In many, switching from one mode to another occurs in the handset settings. Open the menu, select the appropriate item (tone/pulse mode), press "ok". If none of the methods works for you, carefully read the instructions for your phone. Perhaps it is individual. In addition, incorrect handling may lead to undesirable changes in some functions.
How simpleOther news on the topic:
In ordinary city telephones, there are two types of dialing: the so-called pulse, known since the days of rotary telephones, and tone. Currently, it is generally accepted that pulse dialing (when the number of pulses and interruptions corresponds to a particular dialed digit of the number) -
You purchased a Siemens phone for your home, but here’s the problem: you need a tone dialing mode (for example, to follow the autoinformer’s prompts about services), but the instructions are written in such clumsy language that you just have to shrug your shoulders. What to do? Placement Sponsor P&G
There are two types of telephone dialing: tone and pulse. Pulse dialing was used in landlines with disc dial. IN modern devices tone dialing is used. Sponsor of the placement P&G Articles on the topic "How to recruit tone mode"How to enable tone mode
There are two types of dialing – pulse and tone. Pulse – old way dialing and is used by default in landline phones, and tone in mobile phones. To dial a number quickly, or during a call, enter additional number, the tone mode is required. Sponsor of the placement
Landline phones have two dialing modes: tone and impulse. And these modes depend on the phone itself and the capabilities of the PBX. Most PBXs have already switched to tone operation. An old-style phone, i.e. with a rotary dialer, works only in pulse mode, and you
A home or landline telephone can operate in one of two dialing modes: pulse and tone. The default is pulse mode. But sometimes you need to put the device into tone dialing, for example, to select options using keystrokes that lists you
When communicating with friends or relatives, you don’t need to worry about the phone mode, but if you call the support service, then, most likely, the operator’s voice on the answering machine will ask you to switch the phone to tone mode. Then you can use numbers to give commands to the answering machine. To you
Instructions
Check that the tone is turned on mode Or you can press any button on the phone while the handset is off-hook. Your device may already be in mode e tone dialing. Listen to the sounds it makes when dialing. If these are short signals, it means mode really tonal. If you hear short clicks in the telephone handset, the dialing is pulsed. This means you may not be able to take advantage of some interactive features.
To switch some phones to mode Tone dialing is not enough to simply press a key. You need to hold it for 1-2 seconds. Try holding the "*" or "#" button for a while. Then look at the screen of your phone radio. The corresponding inscription should appear on it: “tone” or “t”. If the message does not appear, listen again to the sounds that the phone makes when you press the buttons. Some telephones have "tone" or "t" and "i" keys/switches. In such phones, just select the one you need mode(pulse/tone). Switches can be located on the side or bottom of the base/handset. There are many phones with individual way of switching to mode tone dialing. For example, sequential pressing of the keys "*" "-" or "-" "*" "-". Tonal mode included.
If none of the combinations helped switch your radio phone to mode tone dialing, carefully study the menu of your device. In many, switching from one mode and on the other it happens in the handset settings. Open the menu, select the appropriate item (tone / pulse mode), click "ok". If none of the methods works for you, carefully read the instructions for your phone. Perhaps it is individual. In addition, incorrect handling may lead to undesirable changes in some functions.
Modes recruitment phone number There are only two - pulse and tone. All landline phones in Russia use pulse mode by default. Tone may be required if you need to select a response using a number, for example, when calling a call center. Then the automatic voice will ask you to first put the phone into tone mode.
You will need
- instructions for the telephone set
Instructions
First of all, determine the mode that you are already using. This is easy to do - if, when dialing a number, you hear clicks (the number of clicks is equal to the number corresponding to the dialed digit), then the mode is pulse. Tone mode is characterized by sounds of different pitches - tones that can be heard when pressing number buttons.
It is important whether your phone supports touch tone dialing. Old rotary phones can only operate in pulse mode. It also happens that the telephone exchange to which your number is connected is old and analog, so it functions only in pulse mode. This means that you will not be able to change it to tone. But in most cases, modern phones can operate in both tone and pulse modes.
Almost all telephone sets (approximately 90%) switch to tone mode very simply - you just need to press the “star” button (*). Typically, of the remaining 10%, most of the devices have a TONE or TONE button on the keyboard, which changes the dialing modes.
If your phone is one of a small number of those devices that are configured in an exceptional and unusual way, you will have to find the instructions for it and read how to put the phone into tone mode. But such models are extremely rare.
note
Dial a number from cell phone, remember that in cellular communications Only tone dialing is used, so no translation is required.
If you often have to dial a number that requires switching to tone mode, and you have a phone in which this action requires a complex sequence of button presses, then you can store the entire combination in memory. Then, to change the mode, you will only need to dial the number from the device’s memory, and this is much easier than remembering sequences or always keeping the instructions at hand.
Sources:
- tone dialing mode
For firmware radiotelephone you need to clearly define the purpose of such an action. Perhaps the radiotelephone began to malfunction during normal operation - it responds slowly to button presses, turns off spontaneously, and phone numbers are not saved. One of the reasons for updating the firmware may be a program change in order to receive updates, improve the operation of the phone by optimizing the operating parameters and its structure.
You will need
- Guide to flashing radiotelephone firmware.
Instructions
For firmware Nokia phone connect the phone to the computer and in the folder properties find the display hidden files, turn them on and make them open.
Download from the company website new version for your model radiotelephone, create a new folder and extract all the files into it. The important thing is that the folder must be empty and not located in the saved files of the phone.
The NSU program will start flashing the firmware automatically, but you need to connect to the Internet, or you can use the phone itself as a modem. Based on the traffic, they are guided by the correctness of the download, it should be less than 1 MB; if the value is higher, then you need to cancel this action and try to download the update again.
Turn on Charger and run the program, click the “next” button, accept the terms license agreement. Now the download occurs, after it is completed the program will restart the phone. That's all, the phone is reflashed and ready to go.
note
For different operating systems you need to copy the corresponding files.
Helpful advice
Entry rm-313 – needs to be changed according to your phone model. To download the firmware, you can use your phone as a modem; to do this, you need to set up access via a radiotelephone and register an access point in it.
Cell phone locking is used to protect the owner’s personal data in case of theft or loss of the mobile phone. You may also encounter operator locking of your phone, which will prevent you from using it on any network other than the original one. In each case there is a specific sequence of actions that must be taken.
Instructions
The SIM card is blocked due to entering the wrong PIN code three times. It is possible to remove the PIN code. To do this, you need to enter the pack code located on the SIM card packaging. Once you enter it, you will be prompted to enter a new PIN. If this attempt fails, contact your representative. mobile operator. Request a replacement SIM card. This will require passport data and the physical presence of the owner of the phone number.
Operator locking of the phone is used to prevent the device from being used on a network other than the original one. In this case, when you turn on the phone with someone else's SIM card, a request for an unlock code appears. You can obtain this code by contacting the operator's representative office. Justify your request by saying that you want to use the phone while traveling, but do not want to overpay for roaming. Provide serial number phone, as well as owner data for verification. Use the received code to remove the protection.
If your phone is locked with security codes and you don’t remember it, contact the representative office of the manufacturer of your device. You will need a firmware reset code or a reset code. Provide your phone serial number and enter the codes. Please note that using the firmware reset code will return the phone to its factory state, i.e. will erase all existing personal files. Using a reset code will allow you to keep the personal information saved on your mobile, but will return all settings to factory settings.
If the previous step failed, reflash the phone. Use sites such as allnokia.com or samsung-fun.ru to find programs and instructions for synchronization, as well as further updating the cellular firmware.
Video on the topic
