Configuring routers involves changing many different parameters, and setting them to the wrong values can result in you losing access to the Internet. The interface of each router has its own differences; the article describes methods for resetting devices from the most popular manufacturers.
The main reasons for resetting settings
Resetting router settings is done for various reasons; the most common options include the following situations:
- Resetting your access password. If you changed the password and forgot it, then by resetting the device settings you can restore the factory settings of the router access password. Usually, standard settings login and password are indicated on the back panel of the router;
- Incorrect Internet connection settings. If you chose the wrong settings when connecting to the Internet, then a reset is used to reconfigure the router from scratch. Also, if your router does not need configuration to gain access to the Internet, you can always reset the settings to restore Internet connection;
- connection to another provider. If connecting to a provider requires certain settings, then in some cases it is much easier to reset the settings to create another router connection to a new provider. In some connections for correct operation games or applications open additional ports, which is not required to connect to the Internet from another provider;
- Preparation for flashing the device. As a rule, before flashing a router, it is recommended to reset the settings to factory values to reduce the risk in the process of flashing the device.
Resetting the router to factory settings - two methods
For all devices from the most common manufacturers, there are two options for resetting parameters:
- hardware;
- program.
The hardware method involves pressing and holding a button on the device's body, and a soft reset is performed through the router's web interface.
Software method
To perform a soft reset, you must directly connect and access the device interface. If you don’t know or have forgotten your password and/or login, then only the hardware method is suitable for you.
Video: Setting up a Wi-Fi router TP-LINK
Devices from different manufacturers have interfaces that are different from each other, despite the fact that the essence of the function remains the same. Resetting the settings is done using a computer connected to the router using a network cable.
This article provides instructions for resetting devices from some of the most popular manufacturers.
For TP-Link
To reset the parameters of TP-Link routers, you need to go to the device interface.
To do this you need to perform the following operations:
- open browser;
- enter the router address in the address bar (192.168.1.1);
- enter your login and password. In most cases, admin is used as the login, and the password or not at all;
- is installed or the same as the login.
As a rule, the factory login and password parameters are indicated on back side router.
To reset settings you need to:
- go to the “Systemtools” or “System Settings” section;
- select “FactoryDefaults” or “Factory settings”;
- Confirm the operation in the window by clicking on the “Restore” button.
After completing the operation, the device will reboot with the default settings.
For Asus
To access the menu for restoring settings to factory defaults for ASUS routers, you must enter the router address 192.168.1.1, and then enter your username and password.
Resetting a router from the manufacturer Asus to factory settings is performed from the “Administration” or “Administration” subsection (the “Restore/Save/Upload Settings” tab, “Restore/Save/UploadSettings”), which is located in the menu section “ Additional settings" or "AdvancedSettings".
To reset, you need to click on the “Restore” button. After the reboot, all settings will be restored to factory settings, including Wi-Fi settings.
Photo: Restore settings tab
For D-Link
To restore the default settings of D-LINK routers you need to:
- go to the router’s web interface (address 192.168.0.1.);
- enter your login and password, go to the “System” section;
- select the “Tools” tab;
- Click on the “Restore Factory Defaults” button.
After rebooting, the device will be returned to factory settings. Some routers have a function for saving settings into a separate file for later restoring device parameters from it.
This may partially solve the problem of spontaneous resets that occur on some routers when there is a power outage.
To save settings you need to:
- click “Saveconfiguration” or “Save”;
- download the file to the required location on your hard drive;
- To restore, you must specify the location of the file and click on the “Restore” button.
For Netgear
For devices from the NETGEAR manufacturer you must:
The device will erase all settings entered by the user, including password and Wi-Fi key changes.
For Zyxel
To reset the settings of routers manufactured by ZYXEL, you must:
- go to the device’s web interface, for which you need to enter the address 192.168.1.1 in the address bar of the browser;
- enter login and password;
- go to the system subsection (“System”);
- select the “Configuration” tab;
- in the “SoftwareReboot” block, click on the “Reset to factorydefaults” button.
Having received confirmation, the device will reboot, after which all settings will be returned to their original settings.
Hardware method
If programmatic method is performed through the device interface, then a hardware reset of the router or hard reset is performed by pressing a special button, which is usually located on the back of the router.
In most cases, the reset buttons are labeled “Reset.” To avoid accidental pressing, the reset buttons are specially recessed, so a ballpoint pen or pencil is used for pressing, or in rare cases, a pin.
Before performing a reset, it is recommended to disconnect all cables except the power cord. To reset the settings using hardware, press the “Reset” button for 5 to 15 seconds until the indicators located on the front of the device go out or blink.
The hardware method of resetting the router is most often used in cases where the user has changed the password for accessing the web interface and has forgotten it. In other cases, the software method is more convenient and easier.
After resetting the settings, you can log into the router using the standard login and password settings that are located on the back of the device.
Resetting the settings helps solve various situations, including such as restoring the access password to the router interface or preparing the router for firmware. At the same time, resetting devices to factory settings does not require any specific skills or knowledge.
Thanks to these instructions, you can easily return your device to factory settings.
Have you encountered a situation where there is no Internet due to the fact that the router has become inaccessible? There is no way to go to settings because I forgot my password. What to do? There are two methods: software and hardware. Let's take a closer look at how to reset a password on a router.
A little theory
A router is a microscopic computer equipped with a processor, permanent and RAM. Management occurs using the OS.
After purchasing the device, to go to the default settings, a login and password are set. These values change. What to do if you changed them and forgot? Let's consider this issue in more detail.
What is it for
Any router can fail. Password reset is used if:
- Forgot your password;
- incorrect settings;
- the provider has changed;
- to change settings home network.
What to do first
When reset, all device settings will change. The router will have to be configured again.
Hard reset
There is a small button or hole on the device. It needs to be clamped with something sharp (for example, a paper clip) for 10 seconds. will be reset to factory settings.
How to reset the password on an Asus router
Open the browser, enter http://192.168.1.1, or router.asus.com. Go to the “Administration” section.
Further, as in the screenshot.
The router will reboot. Recovery will take 2-3 minutes.
How to reset the password on a Tp-Link router
Go to 192.168.1.1. Password and login (if you have not changed it) “admin”.
Next, do this:
This will happen and the settings will be restored to factory settings.
How to reset the password on a D-Link router
A soft reset is no different from the method discussed above. Write in the browser 192.168.0.1. Next, go to “System” - “Configuration” - “Factory settings”.
Hard reset
There are situations when code fragments remain in the router’s memory. The device is not working properly. Then pressing the reset button will not help. What to do? Perform the following sequence of actions:
- Press "Reset" and hold while you perform the following steps;
- After 30 seconds, turn off the power to the router;
- Hold the reset button for 30 seconds.
How to reset a Wi-Fi router password
Connect without a password using the WPS standard. Almost all router models support it. For this:
The data will be transmitted by the router. The other person won't connect this way.
How to view in OS
Press "Win+X", select "Options".
Further, as in the screenshot.
Conclusion
We looked at how to reset the login and password on the router. The easiest way is to reset the settings to factory settings. Use it if you are confident that you can configure the settings yourself. Otherwise, try connecting using WPS, or look at the password in the system settings.
Resetting the settings may be required if the router regularly freezes, the Internet is unstable, or if you don’t know or have forgotten the password for . After all, it’s no good to own equipment and not have access to its web face.
If you have access to the router's web interface, then it wouldn't hurt to reset before. If resetting the settings does not help in the fight against any problem, you can quickly restore all the settings so as not to waste time and not set everything up again manually: , setup , restore . In short, horror.
How to reset your router (modem, access point, repeater)
Method number 1. Hard reset (preferred)
Find the button RESET. Usually the button RESET located on the back panel of the router or on the bottom cover.
With the router powered on, use a match or any other sharp object to press and hold the recessed button for 20 seconds RESET. Then, let her go. In most cases, if the reset is successful, all device indicators should light up and go out for a few seconds.
After the reset, you can log into the router’s web interface using the data from the sticker. Typically, the default IP address is 192.168.1.1, login admin, and the password is empty.
Read our articles on the topic:
- Reset
- Restore Device
- Restore Factory Defaults
- Restore
- with the router turned on, press and hold the Reset button for 30 seconds;
- While continuing to hold Reset, turn off the power supply and wait in this state for another 30 seconds;
- continue to hold the button pressed, turn on the power supply and wait 30 seconds again.
In chapter Maintenance or Tools or Settings Find the factory reset soft button.
This button may be called:
In routers manufactured by TP-Link, as a rule, you need to go to the section System tools, select subsection Backup & Restore and press the button Restore.
In the D-Link DIR-300 NRU B1 router it looks like this:
Rule 30-30-30
If you can't reset the configuration, try the 30-30-30 rule:
I hope these methods will help you reset your router settings to factory defaults.
Wi-fi has long and firmly become a part of the lives of many city residents. Many people can no longer imagine visiting a public place, such as a cafe, without the ability to connect to the Internet. Naturally, there is a desire to have wireless access to the network at home. This is very convenient, but there is a possibility of encountering a typical situation that, one way or another, probably everyone faces - you need to connect a new device to the Internet, but you have forgotten the password for the router. Fortunately, this problem can be solved.
Content:
How to find out the password for your Wi-Fi router if you have forgotten it?
To go through the recovery process Wi-fi password, you will need one computer previously connected to it.
- Right-click on the icon with the connected Wi-Fi in the right, next to the clock, bottom corner of the monitor and select “Network and Sharing Center” from the items that appear.
- In the window that appears, you need to select “Wireless Network Management”.
- When you see another window that appears, on the required connection you need to right-click again and select “Properties” there.
- Inside the Security tab, in the column called Network Security Key, you will find a hidden password. To see it, you need to check the box “Display entered characters”, and it will immediately become visible to you.
If there is not a single computer already connected to the network, then you need to find out the password using the router itself.
- Connect the router to your computer using the included power cord.
- In the address bar of any browser you need to type the following address - . Next, you will need to fill in the fields with your login and password, which will allow you to access the settings. With a high degree of probability, this is admin/admin.
- Next, you need to go to the following tabs - Wireless and Wireless Security. In the column called PSK Password: (PSK Password:) you will see your password. Perhaps it will be indicated in some other column in the same section. If you have a router from Asus, then you will see the password immediately on the first page.
Standard router and router passwords
By default, in most cases, the login “admin” and a similar password “admin” will be set on your router. But in some models the situation is different. For example, in the D-Link DI-804 model the password field will need to be left blank with the same login, and in the Zyxel Prestige 650 model the login and password will be the set of numbers “1234”.
By the way, if the above passwords do not work, it means they have already changed them before you, the most popular passwords, try them.
How to reset the password from the router to the standard/factory one?
If you don't remember your router login and password, try entering the factory ones. If they don't fit, you'll have to reset. It's very easy to do. On each router you will find a small button, usually next to the power button, which you need to press with something sharp (since it is very small) and hold for about 10 seconds.
After this, all logins/passwords/settings will be reset to factory settings and you can use your router. But keep in mind that you will have to re-enter all the settings that were made earlier.
We found out the password from Wi-Fi router? Don't forget to take a look and enjoy it for free!
How to change the password of a wifi router?
For this procedure, you need to connect the router to your computer using the cable that comes with it.
- Launch your favorite browser and type ;
- Type your username and password in the appropriate boxes to begin setting up the router in the appropriate section;
- Go to the Wireless section and then - Wireless Security;
- Check the WPA/WPA2 box;
- Set the following settings: Version should be set to WPA2-PSK, and Encryption should be set to Automatic;
- In the column called PSK Password, enter your new (changed) wifi password and click Save;
- After the router asks to reboot, click OK;
- In the red inscription that appears, click on the blue phrase “click here”, and the process of changing the password will be completed.
3 more useful articles:
Forgot your wi-fi password in your apartment or in your favorite cafeteria/restaurant/hookah bar? If you have previously...
The Sidejacking utility is translated from English as “Left Connection” and uses a classic version of the attack called…
