the phone fell into the water. It vibrates incessantly. WHAT TO DO??? and got the best answer
Answer from Yomil Fakhreev[guru]
Take out the battery cover, don’t close it, let it dry thoroughly (at least 24 hours), then try turning it on. If it doesn't work, throw it away. This should have been done immediately upon getting into the water (read the operating instructions)
By the way, don’t even try to dry it on the radiator - it will melt...
Answer from Baby[guru]
Fuck... I just suck at blondes...
Answer from Vasya Pryanik[guru]
So use it while it vibrates! ;O))
Answer from Yergey Ushakov[guru]
Don’t get lost, wrap it in a condom and take advantage of the moment!!!
Answer from Victor Gorelik[guru]
put it on the battery, disassembling it as much as possible, to dry for at least a day
Answer from Siddis[guru]
Sell quickly and buy a new one, so your brain will float now
Answer from Evgeny Litvinov[newbie]
This happened today, the phone works but vibrates before turning on, I’ll answer tomorrow 2
Answer from Bezhan Karavaev[newbie]
This happened today, the phone works but vibrates before turning on, I’ll answer tomorrow
Answer from Alik Gaptullin[newbie]
hmm. 1) Disassemble the phone and dry it
2) carefully clean the chip with a soft brush
3) on the forum, I don’t know where, find a circuit, each phone has fuses on a chip, so they need to be removed, that is, carefully broken off (there are 2 to 3 of them), it should work
Condition A. there are no rotten tracks or legs on the microcircuit. B. THIS IS NOT CHINESE
Answer from Veg/\[guru]
you take out the battery, instantly, and forget about it for 3 days, or better yet for a week, somewhere in a dry place, then you put the battery back in place and try to turn it on. .
Question: Please tell me, is there a chance for me to recover a drowned phone?
Answer: If you immediately removed the battery and did not experiment with turning it on, then there are chances. Methods of dealing with water and its consequences are described above. But here it depends on your luck. It all depends on many factors such as the time spent in the water, the amount of water that got into the device, the architecture of the hull, etc. It happens that the phone is lying in the water for God knows how long and nothing, and sometimes it gets caught in the rain a little and gets covered. It all depends on a very large number of factors, which together form the level of luck
Question: Is it enough to dry it on a radiator for several days after getting water, or is something more needed?
Answer: It is impossible to dry the phone well without thoroughly disassembling it. And drying alone is not enough. You still need to wash out traces of oxidation. It can only be thoroughly washed with a special liquid and in an ultrasonic bath. You can dry it only in a special drying cabinet (under temperature).
Drying with radiators and hair dryers does not give any positive results. Except when the phone was disassembled and dried immediately after being removed from the water.
Corrosion that begins in a wet phone does not stop simply by drying it with a hairdryer or on the battery.
Answer from Sergei Ivankov[guru]
dry without the battery after a day, try to turn it on, if it doesn’t work normally, it’s a failure
If your phone vibrates but doesn't turn on, this could indicate a number of problems, ranging from a software glitch to damage. motherboard. To troubleshoot problems, you need to identify the cause using diagnostic methods - you can do this yourself.
Among all the reasons why vibration occurs, but an Android smartphone does not turn on, there are several of the most common:
- Failures in the display module (including broken cable).
- Need to update drivers or firmware.
- Battery fault.
- Problems with flash memory (sometimes it is enough to remove the memory card).
- Short circuit on the board.
- Battery overheating.
- Water or drinks have gotten into the internal parts of the device.
If the smartphone responds to charging by vibrating, but does not boot, and therefore there is no way to check whether the battery is charging, there is a high probability that this is the problem. To verify that the battery is faulty, it is recommended to remove the battery and place it on a universal frog charger. If after a few hours it is fully charged, then the reason needs to be looked for in the phone itself. There is a possibility that the power controller has burned out - only resoldering the chip by a technician will help.
If the screen is dark and there is no label image on it, you need to check the functionality of the system board or perform diagnostics using a PC and a micro USB cable. For this purpose, you can use the following programs:
- Phone Doctor Plus. Shows the device temperature, memory status, touchscreen, multi-touch.
- Aida64. Displays temperature data, display information, CPU load, battery status.
- Phone Tester. Diagnoses the status of sensors; battery capacity, temperature and performance; multi-touch operation.
Elimination methods
Factory reset
Most effective method To combat the problem - reset the settings to factory settings. You won’t be able to do it in the usual way through the settings if the phone doesn’t turn on, but you can go the other way:
- Find the volume control, hold down “+” while simultaneously pressing the ON button.
- In the menu that opens, select wipe/data using the volume up and down keys (up/down).
- Confirm the action by clicking on “yes”, then at the end select “Reboot System” to restart the system.
The operation takes no more than 5 minutes. Users should be aware that Hard Reset deletes all data, including photos and videos, so if possible, you should first copy them to your computer.
There are other combinations for entering the “Recovery” mode by simultaneously pressing several keys, depending on the brand of the device:
- HTC, Nexus: Power and Volume Down buttons.
- Sony: power + volume up.
- Motorola: both volume keys and power button.
Service codes
You can restore settings to factory defaults using service codes:
- *#*#7378423#*#*
- *#*#7780#*#
- *2767*3855#
Installing updates
If the problem lies in software problems, you need to update the smartphone firmware. This is done like this:
- Connect an Internet connection (preferably Wi-Fi).
- Open the settings, go down to the “About phone” or “About device” item.
- At the very beginning of the list there will be a “System Update” menu - click on it.
- Select "Check Now". The gadget will automatically search for updates. If they exist, they will be installed automatically, after which the owner will be notified by the system.
Flashing
Sometimes owners of Android smartphones want to install a custom (unofficial) version of the firmware. In this case, they come to the rescue special programs: for example, ROM Manager.
How to use it:
- Load the desired firmware onto the USB-Flash.
- Launch the application and select “Install ROM from CD card”.
- We indicate the path to the archive where the firmware that needs to be installed is located.
- Click on “Reboot and Install”, then check the box next to “Save current ROM”. This will allow you to roll back to old version Software if you don't like the new one.
- We agree with the reboot. After this, the device will restart itself and install updates.
Battery replacement
If the user decides to charge his gadget, and after a couple of hours it refuses to turn on, the problem should be looked for in the battery or power controller. In the first case, it is enough to buy a new battery, but in the second, you will have to contact a service center, since independent repairs can aggravate the situation.
Conclusion
Some owners of Android devices are faced with a problem when charging is in progress, but the phone does not turn on and makes vibrating sounds. Here it is necessary to carry out preliminary diagnostics to identify the causes, and then decide how to repair the device - yourself or by contacting a qualified specialist.
Video
Samsung smartphone vibrates all the time
A smartphone is a modern, multifunctional means of communication. For every owner of a fashionable gadget, the reliability of the device remains an important criterion. But the device does not always live up to the hopes placed on it, and there are cases when samsung smartphone vibrates all the time. Let's try to find out the reasons for this malfunction.
- Mechanical damage;
- System failure;
- Optimization problem;
- Installing updates.
- Mechanical damage
A serious reason for this situation is mechanical damage to the device. During careless use, the gadget is exposed to various external influences. Such impacts include: shocks, falling of the gadget, water getting inside the device, influence of the temperature conditions of the external and internal environment. Probably, these reasons are the problem of device failure. You should immediately contact the Service Center.
System failure
Crash software, in some cases becomes a problem for a smartphone. As a result of the OS failure, the Samsung smartphone vibrates all the time. Such a malfunction entails a lot of other more serious and sad consequences for the device. It is better to repair this type of fault at the Service Center, since you may not be able to cope with the OS firmware yourself.
Installing updates
Every user loves to update apps installed on a trendy gadget. But not every user knows that not all updates are compatible with the gadget’s system features. The performance of the device directly depends on the optimization and errors of applications loaded into it. Some of these updates cause significant damage and eventually the device begins to vibrate constantly. The Service Center technicians will help you resolve this issue.
Discussed above possible reasons problems when Lenovo smartphone vibrates all the time, are possible, but not the only ones. To accurately determine the cause of the malfunction, it is recommended to contact a Service Center engineer. The technician will conduct a free diagnosis of the device and provide a guarantee for the work performed for up to 3 years. The courier will deliver the finished gadget free of charge to a pre-agreed place and time.
Sometimes iOS devices can behave strangely. For example, the problem of spontaneous vibration is very typical for smartphones: the iPhone vibrates while charging, when connected to a computer, or simply vibrates without stopping after updating to iOS 12, and even does not turn on. Wondering what is happening, users begin to try to fix the device with everything accessible ways, press all the buttons in a row, reboot it, turn off the sound, etc. These methods may not work, then help will come Tenorshare ReiBoot program.
Why does my iPhone vibrate non-stop and won't turn on?
Today we want to take a closer look at the problem of why the iPhone vibrates incessantly and does not turn on yet. Usually the reason for this is system error, which somehow puts the phone into a vibration state. In order to solve this problem, you can try the following.
If your iPhone vibrates continuously but is turned on, go to Settings and try changing the vibration settings. Perhaps this can solve the problem. It is unlikely that this will help, so you can try rebooting the device. If your iPhone vibrates and won't turn on, you can try doing a hard reset. To do this, hold down the power button for a few seconds; then, without letting go, hold it HOME button(on iPhone 7 – volume down button); The device will restart, then gradually release both buttons and the iPhone will stop randomly vibrating.
If your iPhone vibrates when charging or when connected to a computer, you can try disconnecting the cable from it, or also force a restart. If none of these methods help, we suggest you use a very simple tool - the program. This utility solves most problems by entering and exiting recovery mode.
What to do if your iPhone vibrates by itself?
When your iPhone vibrates periodically, you have no other choice, try free program Tenorshare ReiBoot. It can solve hangs on the iPhone and allows you to restore a system failure by reflashing it. If your iPhone is constantly vibrating after updating to iOS 12, then Tenorshare ReiBoot can help. In addition, if the iPhone is stuck in recovery mode, on an apple, it constantly reboots, even if you want, this can be done using Tenorshare ReiBoot.
1. Download the Tenorshare ReiBoot program from the official developer website, and then install it on your computer.
2. Connect your iPhone to your computer using a USB cable. Tenorshare ReiBoot should recognize your device.
3. Now click on the “Enter Recovery Mode” button. Your iPhone will be put into recovery mode. You will see the iTunes logo on the screen and USB cable. The device has successfully entered recovery mode.
4. As soon as the “Exit Recovery Mode” button becomes active, click on it and the phone will reboot. After restarting, the iPhone will stop vibrating and will be ready to use again. Please note that there is also another button here "Solve all iOS freezes" which can be used to solve problems such as. blue screen death, iPhone stuck on a black screen, etc.
Tenorshare ReiBoot can be useful for both Mac users and Windows computer owners; You can download it absolutely free.
