Instructions
Determine which mode you currently have enabled. If you hear clicks when dialing a number on the handset, then the mode is pulse. If tonal sounds having different pitches are tone mode.
Most phones can be put into tone mode by pressing the * (asterisk) button.
Telephones that are mini-automatic telephone exchanges manufactured by Panasonic, are switched to tone mode if you first press the asterisk (*) and then the hash (#).
Domestic phones “Rus 25” and “Rus 26” are switched to tone mode if you press the “Mode” buttons, then the number 3 and the number 0. “Rus 19”, “Rus 20” and “Rus 21” change the mode using a combination (*) +(*) + (3) +(0).
There are telephones that have a special button for changing modes. It is usually called TONE or "TONE".
Some phones have other buttons for switching to tone mode, as a rule, they are labeled. If none of the listed methods is not suitable for your phone, you will have to look for instructions that necessarily describe how to change the dialing mode, if this option is provided by the manufacturer at all.
Modes recruitment phone number There are only two - pulse and tone. All landline phones in Russia use pulse mode by default. Tone may be required if you need to select a response using a number, for example, when calling a call center. Then the automatic voice will ask you to first put the phone into tone mode.
You will need
- instructions for the telephone set
Instructions
First of all, determine the mode that you are already using. This is easy to do - if, when dialing a number, you hear clicks (the number of clicks is equal to the number corresponding to the dialed digit), then the mode is pulse. Tone mode is characterized by sounds of different pitches - tones that can be heard when pressing number buttons.
It is important whether your phone supports touch tone dialing. Old rotary phones can only operate in pulse mode. It also happens that the telephone exchange to which your number is connected is old and analog, so it functions only in pulse mode. This means that you will not be able to change it to tone. But in most cases, modern phones can operate in both tone and pulse modes.
Almost all telephone sets (approximately 90%) switch to tone mode very simply - you just need to press the “star” button (*). Typically, of the remaining 10%, most of the devices have a TONE or TONE button on the keyboard, which changes the dialing modes.
If your phone is one of a small number of those devices that are configured in an exceptional and unusual way, you will have to find the instructions for it and read how to put the phone into tone mode. But such models are extremely rare.
note
Dial a number from cell phone, remember that in cellular communication Only tone dialing is used, so no translation is required.
If you often have to dial a number that requires switching to tone mode, and you have a phone in which this action requires a complex sequence of button presses, then you can store the entire combination in memory. Then, to change the mode, you will only need to dial the number from the device’s memory, and this is much easier than remembering sequences or always keeping the instructions at hand.
Sources:
- tone dialing mode
Installing a mini PBX at an enterprise allows you to coordinate the actions of all employees through convenient and fast communication. At the same time, clients and business partners can directly contact the necessary manager and not wait for a long switch. The presence of such a device in an organization indicates its business activity and successful activities.
Instructions
Start with design work. They must include all the necessary measurements for installing a mini PBX. At the same time, the needs of the company are taken into account and cabling options are considered. Draw up a technical specification that will take this data into account. List the necessary tools and materials for installing a mini PBX.
Remember that if you want to lay the cable and not damage the appearance of the interior, you need to purchase special decorative boxes. There are also wireless mini PBXs, which are much more convenient and reliable, since fewer factors affect the quality of its operation. However, such devices are somewhat more expensive. Consider this option and calculate the economic benefits of such costs.
Lay the cables for the mini PBX, install and connect telephone sockets, determine locations for other equipment. Check that everything is located conveniently and accessible. This work must be carried out with extreme care and precision, since a crushed cable, a loose socket or poor contact can lead to hissing in the handset and a decrease in the quality of communication. Thus, it is recommended to leave this task to professionals.
You called the help desk and heard an invitation to put the telephone in tone mode, and then dial a few numbers in this mode. How to do this?
Sponsor of the placement P&G Articles on the topic "How to dial a number in tone mode" How to install tone mode How to dial an internal number How to dial additional numbers
Instructions
Many push-button corded telephones have special switches labeled "Pulse-Tone". If you are connected to a modern electronic PBX that supports tone mode, keep this switch in the "Tone" position at all times. If you only need the tone mode when making calls to help desks and similar services, using this switch is inconvenient: it will wear out, and, moreover, some devices respond to changes in its position only after the handset is hung up and picked up again. IN cordless phones, especially the DECT standard, similar switching is carried out through the menu. But using this method when calling help desks is also inconvenient. For this reason, if your PBX does not support tone mode, it is better to temporarily switch to it this way. After calling the help desk in pulse mode, press the button with an asterisk. After this, all further key presses will cause tone signals to be transmitted. After you hang up, the device will automatically switch to pulse mode again. When calling from cell phones, no switching is required to transmit tone signals. Even if you don't hear them yourself, they are actually still transmitted to the subscriber. If it turns out that there is no response to key presses, find an item in the phones menu that allows you to enable the DTMF signal transmission mode, and activate it. Sometimes it becomes necessary to transmit tones from wired phones that do not provide this mode at all. By the way, such a device can also be a push-button device, it’s just quite old. Then switch your cell phone to a mode so that tone signals when pressing keys are heard directly from its speaker (if the device has such a mode). Bring its speaker to the microphone of the handset of the wired device. By typing the appropriate numbers on the cell phone keypad, then press the end call button so that the call does not occur. There are also special devices for the acoustic transmission of DTMF signals - beepers. How simple
Other news on the topic:
Even if your telephone exchange operates only in pulse mode, autoinformers installed in some organizations accept only tone commands. To interact with them, you have to switch the telephone to the appropriate mode. Sponsor of P&G placement Articles on the topic "How
There are only two modes for dialing a telephone number - pulse and tone. All landline phones in Russia use pulse mode by default. Tone may be required if you need to select a response using a number, for example, when calling a call center.
There are two types of telephone dialing: tone and pulse. Pulse dialing was used in landline telephones with rotary dials. IN modern devices used tone dial. Posting sponsor P&G Articles on the topic "How to dial tone mode" How to enable tone mode
There are two types of dialing – pulse and tone. Pulse – old way dialing and is used by default in landline phones, and tone in mobile phones. To dial a number quickly, or during a call, enter additional number, the tone mode is required. Sponsor of the placement
Landline phones have two dialing modes: tone and impulse. And these modes depend on the phone itself and the capabilities of the PBX. Most PBXs have already switched to tone operation. An old-style phone, i.e. with a rotary dialer, works only in pulse mode, and you
A home or landline telephone can operate in one of two dialing modes: pulse and tone. The default is pulse mode. But sometimes you need to put the device into tone dialing, for example, to select options using the keystrokes that it lists for you
When communicating with friends or relatives, you don’t need to worry about the phone mode, but if you call the support service, then, most likely, the operator’s voice on the answering machine will ask you to switch the phone to tone mode. Then you can use numbers to give commands to the answering machine. To you
