If the water in the washing machine does not heat up during washing, then in most cases the heating element must be replaced. It is called a heating element; if it is faulty, it needs to be replaced. Let's consider removing the heating element from the washing machine LG, Samsung, Candy, Bosch, Indesit and other popular brands.
Location of the heating element in washing machines depending on the brand
Since the heating element is always in the water, it is located at the bottom of the drum. At the same time, get this element from different models needed in different ways. You can get to the heating element to replace it in the following ways:
- through the front wall;
- through the back wall;
- through the side wall.
In the photo you can see different options for the arrangement of elements.
In cars such as Samsung, Bosch or Veko, the heating element is located both behind and in front of the tank. To determine which washing machine cover should be removed, you need to start looking at the back wall.
When the cover on the back of the machine is full-sized or occupies almost the entire back wall, then it is highly likely that the heating element is located at the back of the tank. And to get to it, you need to unscrew all the screws that are located along the perimeter of the back cover.
When the cover on the machine panel occupies a small part of it, then, as a rule, it is necessary to access the belt. And you can change the heating element through the front panel, since it is mounted in front of the tank. If in doubt, you can first remove the cover at the back of the machine to be sure.
You can remove the heating element from the washing machine Indesit, Ariston, Atlant, Candy and a number of other models only by removing the back panel. To get to the heating element, you need to unscrew all the screws used to secure the cover.
On some front-loading machines, you can get to the heating element by removing the bottom panel on the front side. To remove it, you need to unscrew a couple of screws located on the side.
To change the heating element for models with a vertical loading type, you need to remove the left or right side panel. It is usually secured with several screws to the rear panel and with one screw from the bottom at the front of the machine.
How to replace a heating element using the example of the Bosch brand
It should be noted that you can remove the heating element from a Samsung washing machine by following these instructions. Since many Samsung washing machines have a heating element located in a similar way.
The work order will be as follows:
- First of all, you need to turn off the power to the washing machine;
- To get to the heating element, you need to remove the front panel. The first thing you need to do is remove top panel, to do this you need to unscrew several hex screws. To speed up the process, you can use an electric screwdriver;
- The next step is to remove the detergent dispenser. This can be done by pressing a special latch lock;
- Next you need to remove the front wall. To do this, you will have to unscrew several screws; this will allow you to remove the control panel, which can be removed upward without disconnecting the wires. Then you need to remove the bottom panel. Then you need to disconnect the cuff on the hatch; it is secured with a spring clamp. They vary depending on the version, but for all models you need to pull it. After which the cuff moves inward, and all the screws holding the front wall and blocking the door are unscrewed;
- The heating element is located at the bottom of the tank. You need to disconnect all the wires that connect the heating element. To remember how they are connected, you can take a photo on your phone, this will help you connect them back correctly when reassembling;
- The heating element nut must be unscrewed. You should not unscrew it all the way, this will allow you to remove the heating element by pressing on the gasket;
- The next step after removing the heating element is to remove the thermostat. It can be installed in a new heating element. You can apply a few drops of dishwashing detergent to the seal, this will simplify the process of installing the part;
- To ensure that the new heating element fits into place correctly, you need to press it hard enough. It is secured by tightening the nut. If the seal is well secured, you can start connecting the wires;
- The final step is to install all the parts in the reverse order.
This instruction is suitable for almost all models of Bosch (Bosch), Samsung (Samsung) and a number of other brands.
Replacing the heating element located at the rear of the drum
For many washing machines of the LG, Ariston, Indesit and Atlant brands, the heating element can be replaced through the back panel. Let's look at how you can remove the heating element from an Ariston washing machine.
In this case, the process of removing and installing a new heating element is much simpler. There is no need to remove the front wall and control panel. To remove the back cover you need to unscrew several bolts.
As in the case described above, it is best to first photograph the location of the wires. After this, you need to disconnect the wires and loosen the nut. There is no need to unscrew it completely, it should remain on the thread. Next, the pin is pressed in to remove the heating element.
Before finally assembling the washing machine, you should check whether all parts are installed tightly. To do this, you can pour water into the drum without starting the wash. If water leaks, you need to tighten the nut more tightly. And only after that complete the assembly of all parts.
In this case, the new heating element must be complete analogue old And to simplify the process of changing a failed heating element, it is best to remove the drive belt.
For installation, it is best to purchase a new heating element; a used one will last much less, and then it will need to be replaced again.
To buy a heating element, you can contact a service center that services identical washing machines. You can purchase heating elements in the online store.
The video below will allow you to clearly see how to replace the heating element in a washing machine.
If the heating element (heater) in your Samsung washing machine is broken, then you can determine this by the remaining dirty laundry. The machine simply cannot wash things in cold water.
You can also determine this failure yourself by the HE or TE error on the control module.
This error may indicate a malfunction of either the heating element itself or the water temperature sensor (thermistor). In this case, the wash program will be stopped because the water is not heated to the required temperature.
In general, there are few reasons for the malfunction:
- The heating element burned out;
- the temperature sensor (thermistor) has failed;
- problems in the control module (which generally does not often happen with such an error).
If a failure occurs during washing, do not forget to drain the water from the tank and remove the items before further disassembling the machine! The water drain valve is located at the bottom of the machine on the right under the false panel.
Determining where the heating element is located
So, first we need to determine where the heating element is located in the Samsung washing machine.
Please note that on Samsung the heating element can be located both in the front and in the back. And since it’s much easier to remove the back cover—it’s just a few unscrewed screws—it makes sense to start with the back cover.
For example, on washing machines Samsung Diamond with a load of up to 5 kg, the heating element is located exactly at the back. But on Samsung models Fuzzy, such as S821 and S621, the heating element is located at the front.
Advice: do not rush to buy a new heating element even before disassembling the machine; first diagnose the breakdown. Perhaps the problem is not in the heating element, but in the temperature sensor.
How to remove the front panel
In any case, we start by removing the top cover of the washing machine. Unscrew the two screws on the back under the cover. Slide the cover to the back and remove.
If, after removing the top cover, it is not possible to visually determine on which side of the machine the heating element is installed, then remove the back cover.
If there is no heating element behind the machine, or if it was possible to determine from above that the heating element is located in front of the Samsung washing machine, then we follow the steps:
1. Take out the powder dispenser hopper and unscrew the two screws, as well as the screw on the right side of the control panel.
2. Unfasten the lower false panel.
3. Unscrew the lower fastening of the front panel.
4. Lifting the control panel, unscrew the screws securing the front panel.
5. Remove the outer collar of the hatch cuff by hooking it with a slotted screwdriver near the hinge of the hatch door.
6. Unscrew the hatch lock mount (you can leave it, but then be careful with the lock wires when removing the front panel).
7. Remove the front panel
Below in front of you is a heating element.
How to check the heating element
After you have removed the front panel, you need to determine the cause of the problem. First of all, we diagnose the heating element itself with a multimeter. Diagnostics can be carried out without removing the heating element.
Turn on the multimeter and check its functionality by closing the contacts. Next, we place one probe on one contact of the heating element, the second probe on another contact.
The resistance of the working heating element on a Samsung washing machine is 45-69 Ohms, depending on its power. And the power of the heating element on Samsung can be from 800 to 2000 W. If the multimeter shows a value of 0 or 1, the heating element is faulty and must be replaced.
If the value on the multimeter is 0, the sensor needs to be replaced.
How to remove the heating element
To remove the heating element from a Samsung washing machine, you need to perform three operations:
- Unscrew the central nut (not all the way);
- Press on it (you can use the handle of a hammer);
- Using a screwdriver, carefully pry the heating element around the perimeter and remove it, having first removed the wires from the terminals and from the temperature sensor.
Replacing the heating element
Replacing the heating element of a Samsung washing machine with your own hands is not such a difficult task. Before installing a new heating element, we also check its performance with a multimeter. Don't forget to drop a little machine oil on the rubber seal of the new heating element at its junction, this will speed up its installation.
Before installing a new heating element, do not forget to clear the bottom of the tank of debris. This can be done just through the hole for installing the heating element.
We install a new heating element, connect all the wires and the temperature sensor connector. We assemble the washing machine panels in the reverse order and check its functionality after assembly.
According to statistics, the most common problem in the operation of a washing machine is the failure of the heating element. Naturally, washing in cold water with even the most effective detergents cannot be considered effective. A heating element for a washing machine without an internal loop can be found on the Internet.
Replacing an element is not as difficult as it might seem at first glance. If the replacement is carried out correctly, the full functionality of the washing machine will return.
The washing machine has two covers - front and back. First, it is recommended to pay attention to the back cover. If it is large enough, then most likely access to the heating element is located behind it.
Anyway back cover in the vast majority of cases it is removed without any difficulty. Even if there is no access to the heating element under it, it can always be easily installed back.
If access is found, the replacement process must proceed through the following steps:
- checking the heating element using a tester;
- removing the fastening nut;
- pressing in the pin;
- removal of the heating element;
- installing a new element in its place.
Of course, before dismantling, it is imperative to check the heating element. If it has infinite resistance, then there is a gap in it.
It is no longer possible to restore such a heating element. It is for this reason that replacement is recommended.
The fact is that the pin allows for a tight fit of the heating element to the rubber gasket. Meanwhile, just in case, many craftsmen recommend lubricating the butt part of the heating element with a sealant.
There is nothing complicated about this, and everyone can do it on their own. Sooner or later the seal will become rigid and begin to leak moisture. The sealant will not allow the flood to occur.
Checking the performance of the heating element can only be done directly during washing. Naturally, the temperature must be set to at least 50 degrees.
In the middle of the wash, we feel the glass of the washing machine hatch. If it is hot, then the entire procedure for replacing the heating element was carried out without technical violations and the operation of the washing machine was restored.
The video will demonstrate the process of replacing the heating element in an automatic washing machine:
Based on materials: https://grepan.ua/tjeny/tjeny-dlja-bytovoj-tehniki/tjeny-dlja-stiral-noj-mashiny.html
Tubular electric heater(TEN) - heating element of the washing machine. It is the heating element that heats the cold water coming from the water supply in any washing unit.
If the car doesn't heat well or not at all doesn't heat up water, most likely it is faulty or the heating element has already burned out.
If the heating element is still working, it is enough to produce it cleaning. Faulty electric heater repair Not subject to and replaced to a similar new one.
Is it possible for a person unfamiliar with technology to check and replace the heating element in a washing machine? How to replace the heating element?
Without heating the water, washing most types of fabrics is ineffective. Although delicate laundry can be washed in cold water (30-40?), the majority of items require heating the water to 90-95? . Only in this hot Water removes stubborn stains.
A fault is detected Heating element in two ways:
- 10-15 minutes after the start of washing at high temperature, touch the glass of the hatch. The glass must be warm. If it is cold, the machine does not heat the water.
- After washing at high temperatures, the laundry remains cold. This test will be correct if a regime has been set that does not involve rinsing clothes in cold water.
Most “smart” modern washing units are equipped with a system self-diagnosis. The corresponding message indicates that the water is not heating up. error code.
If, after 10 minutes from the start of the cycle, the washing equipment stops, and the display shows an incomprehensible combination of letters and numbers, you need to look at the instructions.
You can also find a breakdown of error codes for washing equipment from different brands on our website in the “ ” section.
Electric heater- this is a tube (it comes in different shapes), inside of which there is a spiral and a dielectric.
There are two possible breakdowns washing machine electric heater:
- Internal- failure of the spiral or dielectric. During the operation of the washing machine, the heating element’s coil either heats up or cools down, so over time it simply loses its properties. The dielectric may begin to pass current to the body of the machine.
- External- scale. Unfortunately, the quality of tap water in the homes of many Russians leaves much to be desired. Even installing a special water purification filter does not always save the heating element from the accumulation of hard water impurities on its surface.
The folk method of cleaning heating elements is known to every housewife. Having poured citric acid into the powder receptacle, you need to run a long wash cycle without laundry at the highest possible temperature.
Where is the heating element in the washing machine and how to access it?
To remove the old electric heater and install a new one, you need to partially disassemble washing machine. Accordingly, you need physical strength, dexterity and at least minimal knowledge of how technology works.
From tools you will need:
- spanners,
- Screwdriver Set.
The heating element in washing machines of different models and brands is located at the bottom of the tank at the back or front.
Gain access to the heating element located behind washing machine tank, not too difficult. Need to:
- Disconnect the machine from the network.
- Shut off access to water.
- Drain the remaining water from the washing machine through the drain filter. For information on how to do this, read “”.
- Disconnect the drain and water supply hoses.
- Unscrew the screws holding the back cover and remove it.
Get to the heating element in front parts of the machine are more complex:
- Disconnect the machine from the network.
- Shut off access to water.
- Unscrew the screws holding the top cover and remove it.
- Disconnect the latch holding the powder receptacle and remove it.
- Remove the iron clamp hidden in the rubber seal of the hatch and holding it in place. To do this, you need to loosen the spring of the clamp.
- Remove the seal from the front panel and tuck it inside the tank.
- Disconnect the wires from the sunroof locking device.
- Unscrew all the screws holding the front panel, carefully lift and remove it.
How to find out where the heating element is if its location is unknown? Eat three ways:
- Approximately. If the back cover of the washing machine wall is large, there is a heating element at the back.
- By brand. In Ariston, Indesit, Candy, Electrolux, Whirlpool, Zanussi machines, the heating element is usually at the back, while for Bosch, LG and Samsung it is at the front. If the machine is top-loading, the heating element may be on the side. To get to it, you will need to remove the side panel (the easiest way to access the heating element).
- Experienced way. Since the back wall of the washing machine is easier to dismantle, you can start disassembling the unit from there. If the heating element is not at the bottom of the tank at the back, then it is in the front and you need to move on to disassembling the front panel.
The tubular electric heater is mounted into the plastic tank of the washing machine from below. Only the end part is visible from the outside.
The heating element is held in place by one nut on a stud and a seal inside. In the heating element itself there is one more important thing to do in a washing machine - a water heating temperature sensor.
First step in dismantling the electric heater of a washing machine - disconnect:
- wires from the temperature sensor,
- heating element power terminals,
- ground wires (if any).
Second step. Unscrewing the nut. A socket or open-end wrench is suitable for this procedure. The nut is not unscrewed completely, but until the start of the stud.
Third step. Press the stud, as if to drown it inwards up to the nut. Now you can unscrew the nut completely.
Fourth step. Gradually rocking and prying with a flat screwdriver from different sides, remove the heating element out.
Not every water heater is easy to remove. There is no need to rush, nor do you need to put in too much effort. If you act roughly, you can damage the rubber band or bend the tank body.
After the heating element is removed, you can remove the temperature sensor from it.
Fifth step. Checking the heating element. This stage requires special consideration.
The performance of the heating element is checked visually by the amount of scale on it, as well as with a special device - multimeter.
In the heating element, both the spiral and the dielectric are checked.
First you need to solve a physics problem.
The resistance of the heating element is equal to the square of the voltage supplied to it, divided by the power of the heater itself.
It is known that:
- U - voltage, supplied to the electric heater. Usually in household sockets 220 V.
- P - heating element power. It should be indicated in the instructions for the washing machine or on its body. For example, the power is 2000 W.
We substitute the data into the formula and get: R=220?/2000 W=24.2 Ohm. This normal heating element resistance. If it is working properly, the multimeter will show exactly this figure or close to it.
To measure the resistance of the heating element multimeter you need:
- Set the multimeter to resistance measurement mode and set it to 200 ohms.
- Simultaneously touch the two probes of the multimeter to the terminals of the electric heater.
- Look at the multimeter display.
If the display shows “ 1 " or " ? ” - the heating element is broken, “ 0 ” - internal short circuit. Conclusion: the spiral in the heating element is not working.
If highlighted figure close to the calculated one (in the example it is 24.2 Ohm), heating element OK, the spiral inside it is intact.
To check dielectric Heating element (can cause a breakdown of current on the machine body), you need:
- Switch the multimeter to dialing mode and set it to the “Buzzer” mark.
- Touch the heating element terminal with one multimeter probe.
- Use the second probe to touch the body of the heating element or the ground terminal.
If the device beeps, the dielectric passes current to the body of the washing machine, heating element faulty. If there is no sound, everything is in order and the problem of lack of water heating should be looked for in another unit of the washing unit.
If, according to the diagnostic results, the tubular electric heater turns out to be inoperative, it is replaced with a new one, similar to the old one.
Procedure installation of a new heating element:
If the electric heater installation has been completed Right, there will be no problems with washing. After about 15 minutes from the start of the machine operation, the hatch glass will become warm.
At wrong installation of a new heating element is possible leaks water or the washing machine will again display an error code on the display.
Checking and replacing the heating element of a washing machine is a labor-intensive task. For a non-professional, such repairs can result not only in loss of time, effort and money, but also in serious domestic injuries.
Amateur repairs are also fraught with aggravation of the breakdown situation, often with complete failure of the washing machine.
Don't risk your equipment and your health! Entrust the diagnostics of your washing machine and the replacement of the heating element to an experienced, certified, highly qualified VseRemont24 technician!
In most cases, the cause of cold water during washing is a malfunction of the heating element.
And this is easy to check with your own hands.
Replacing the heating element of a washing machine is a simple operation and you can do it yourself.
- Signs of malfunction:
Cold water when washing more than 40 degrees
The machine knocks out, plugs in the electrical panel
After starting the wash, the machine immediately drains the water
- How to check the heating element?
An option to check is to directly disconnect the wires and measure the resistance with a tester.
The heating element is always located at the bottom of the tank.
In washing machines Indesit, Ariston, LG, Ardo, remove the back wall:
Bosch, Siemens, Samsung - front panel:
Having reached the heating element, we dismantle the wires. There are three of them - two supply, grounding.
There may also be a wire to the temperature control sensor. We check for a break with a tester - the resistance is about 30 Ohms.
If the device does not show anything, it means there is a break in the “boiler” - it needs to be replaced.
We also check the “short” on the body.
We measure the resistance between each power terminal (one by one) and the grounding bolt. When the resistance tester indicates a short circuit to the washing machine body.
Option by measuring resistance through connectors on the Electrolux, Zanussi and Aeg boards:
In this case, you need to know which wires go from the heating element to the control module
- Which heating element is suitable for replacement?
The power is not important, the water will simply heat up faster or a little longer, this will not affect the quality of the wash.
The length of the elastic band on which it is attached is 1.5 cm or less - for an iron tank, and if its shape is elongated and more than 1.5 cm, then such a heater is for plastic tanks.
Pay attention to the dimensions of your old heating element. (measured from the flange) ± 1 cm is not critical.
The shape, bend, presence of a hole for the sensor, and the number of terminals must match.
- How to replace heating element correctly?
We unscrew the central nut, but not all the way. We press on the bolt and push it into the inside of the tank.
Using improvised means, we pry it up and carefully remove it from the tank.
We clean the seat from dirt and scale deposits, check the tank for the absence of foreign objects.
We select a specimen of the same mounting size to avoid water leakage. We assemble it in the reverse order, connect the wires and check for water heating.
- How to extend the service life of the heating element:
No, you don’t need to disassemble and clean anything, and it won’t work. It is enough to clean the machine once every three months with citric acid.
The technology is incredibly simple: pour 50 - 70 grams of powder into the powder tray. the above-mentioned substance and run the machine without laundry in the washing mode at the highest temperature.
If the water is very hard, then use an anti-scale agent once every six months to remove lime deposits.
Additional articles.
