How to make blurry borders in photoshop. How to blur the edges of an image? Photoshop blurs the lines! Other edging tools

An image in Photoshop can be feathered in several ways. This article will help explain exactly what feathering is, where it is located, and will show with an example how it can be done in a graphics editor.

shading or Feather is the gradual fading of edges in the image. This softens the edges and creates a gradual and even transition to the bottom layer. It can be available only when working with a selection and a marked area.

The main provisions at work: first, we designate the feathering parameters, then we create a selected area. Clear changes are not visible, since in this way we have indicated to the program that the two selected sides need to be dissolved. Then we get rid of a certain part of the picture in the direction where the dissolution is supposed to be. The result of such actions will be the selective removal of certain pixels, while others will turn into transparent. We will talk more about this in the practical part of the lesson.

Feather settings for tools

Group "Isolation":

• Area in the form of a rectangle;
• area in the form of an oval;
• zone in a horizontal line;
• zone in a vertical line.

Other selection tools:

• "Lasso";
• "Magnetic Lasso";
• "Straight Lasso".

As an example, we take one tool from the list - Lasso. We look at the panel with the characteristics. Select the setting on the top toolbar, which will allow you to set the parameters for feathering, and then select the area. For other tools, the parameter is in the same place.

Selection menu

If you make a selection of a certain area, on the control panel we will get access to actions - "Isolation - Modification", and further - "Shading".

What is the purpose of this action, if there are quite enough different settings on the panel with parameters? The answer is in the correct order. You need to think carefully before isolating a particular part. It is necessary to determine the need to use shading and the parameters for its application. If you don't think about these steps, and then change your preferences after creating the selection, you won't be able to apply the desired settings to it using the options panel.

There will also be difficulties if you want to look at results that use a different number of pixels, since this will have to open a new selection each time, this process will become more complicated when working with complex objects. When dealing with such cases, it will help to use the command - "Highlight - Modify - Feather". A dialog box will pop up - where you can enter a value, and the result will be obtained immediately after applying the function.

It is with the help of the actions located in the menu, and not the settings that are on the panel for the parameters, that key combinations are indicated for the fastest access. In this case, it is clear that the command will be available when using the keys - SHIFT+F6.

Now let's move on to the practical side of using feathering. We start to create the edges of the image with dissolution.

Practice

Feather to smooth out harsh edges

Feathering will also help to smooth out the sharp edges of the picture, which is very effective when working with collages. The effect of an unnatural difference in the edges of different objects becomes noticeable when adding new effects to the collage. As an example, consider the process of creating a small collage.

1. On the computer, create a folder into which we download the source files - the texture, as well as the clipart with animals. Create a new document, for example, with a size of 655 by 410.
2. We add the clipart to a new layer, for which you need to go to the folder created earlier. We press the right mouse button on the image with animals and select from the pop-up - To open with, then adobe photoshop.

   

3. Animals will open in a new tab in Photoshop. Move them to the previous tab - select the component "Moving", drag the animals into the document that was previously created. After the desired document opens in the workspace, without releasing the mouse button, drag the picture onto the canvas.

   

   You should get the following:

   

4. The image will be large and will not fit entirely on the canvas. Take command - « free transform» using CTRL+T. A frame will appear around the layer with animals, the required size for which can be selected due to its movement around the corners. This will allow you to choose the exact size. Just keep it SHIFT to keep the aspect ratio of the image.

   

Important: Large dimensions may not allow the frame to fit in a visible space in Photoshop. You need to zoom out for the document - CTRL+−.

5. The next step involves adding a texture to the background, for which we repeat steps 2, 3. A huge texture will appear on top of the animal layer. Leave it as it is, and don't try to make it smaller, because we'll just move it later. Move the animal layer above the texture in the layers palette.

   

6. Attention deserves the process of giving contrast to the edges of the picture with animals on a green background. A white separation defect will be immediately visible as you will notice a thin streak of white. If you do not observe this defect, it means that the transition turned out to be completely unnatural from the animal's fur to the environment. In this case, we need feathering to correct the edges of the picture with animals. We produce a slight blur, and then smooth transition to the background. Hold on the keyboard CTRL and click on the thumbnail, where the layer is listed on the palette - this will help to select the area along the very outline of the layer.

   

7. CTRL+SHIFT+I will help invert the selection.

   

   SHIFT+F6 enters the size of the feather, for which we will take 3 pixels.

   

   Delete will help remove excess after applying shading. For the best effect, we clicked three times.

   CTRL+D will help remove excess now selection.

   Now we will see a significant difference. Thus, we have achieved softening of the edges on our collage.

   

Blending techniques will help you make your compositions look more professional.

Probably many who work with pictures wondered how to make it so that they would put it on the background or on another picture and so that the edges were not visible, how to blur the edges of the picture? Maybe someone thought that this requires some special knowledge in the field of Photoshop. Not at all. It is enough to have this program and know only one tool. Don't laugh, but this is... "doing." And in order to blur the borders, it is enough to shade the edges of the picture, as it is done:

We take two pictures:

Here is this kind of Roman fighter:

And black background:

Then we open Photoshop.

Choose a tool - selection-oval area

We select what we need:

Presses the right mouse button - Refine Edge

and you're done - the settings window:

Since we are specifically interested in blurring the edge, we immediately go to the feathering parameter and move the checkbox:

The effect on the face, if desired, you can still change other parameters, and click "ok". Again the window with the image and the selection,

now just copy it (Cntrl + C) and paste it where we need it. It turns out something like this:

That's actually all there is to it. I hope you have been able to learn from this post. useful information how to make a smooth transition background image to the picture.

This concludes the report. All for now)

Blurring the edges of a photo is one of the most commonly used techniques by photographers and designers. Pretty simple basic effect that won't take you long to learn. Due to the fact that it is used often, it is worth knowing.

There are several ways to feather the edges of a photo. And the results are somewhat different. Let's explore both.

First, let's take a photo. To do this, you should create a white workspace. And then drag and drop your favorite photo there. Like that:

The first is blurring the edge of the photo with the feather tool.

Select the area close to the border of the photo.

We make a click on the selected area with the right mouse button. From the drop-down list, select "shading".

Set the feather radius. This value is not required. You can choose any other of your choice.

Now to get a blurry edge, we need to invert the photo.

What we got after the inversion.

Now just press the del button.

The edges of the image, as you can see, are blurred. For a more pronounced effect, you can repeat.

Flatten layers and save.

I will show another way to blur the edges of a photo, more interesting in my opinion. For its implementation, the Gaussian Blur tool is used.

In my opinion, this effect is more interesting than the previous one due to the uneven blurring of the border.

We return to the original image. We repeat the selection. We invert.

Now we are looking for the Gaussian Blur operation.

As you can see, this time we have a clear blur border.

The larger the blur radius you set, the sharper the border is drawn.

And a very simple way - the third. But it's for the little ones. The easiest to understand and the most time consuming. It will not be possible to perform these actions accurately the first time.

Select "Blur" from the toolbar. Right-click on the workspace and select the blur radius.

Then, while holding shift, we move the cursor along the edge of the photo.

For comparison "before"

And after"

This method, by the way, can be used not only for photos, but also for any other cut objects.

Through combinations of commands, you can achieve very beautiful effects. Do not rely on one method, there are situations where you will have to use all three. For example, when creating a colorful collage for a banner. Therefore, I strongly advise you to remember all three.

In our age of technology, when different equipment, all kinds of devices are available to each person, taking a photo is not a problem at all. It can be either a quick photo, without focusing on quality, or professional shooting, when every centimeter of the image is studied and, if necessary, corrected. Fortunately, along with the opportunities to take pictures, they are widely available today and are directly involved in image processing. As you know, one of the most popular applications of this kind is Adobe Photoshop. Using this program, you can easily achieve all sorts of effects that will make the quality of the picture higher than it is.

There are several ways to perform this action, and now we will consider them one by one. Let's start with the simplest method:

1. We open the required image in Photoshop and determine the area that we ultimately want to see blurry.
2. Do not forget that we are not working with the original image, create an additional layer so that in case of failure you do not spoil the source.
3. Now let's proceed directly to the process: on the left vertical panel in Photoshop, right-click on the "Quick Selection" tool and select "Oval Area" there.
4. With this tool, select an area in the picture that should remain intact, say, the face.
5. Open the "Selection" section, the line "Modification" - "Feathering". After that, a new window will appear in front of you with a single parameter - the choice of blur radius. However, you cannot know the exact number of pixels, so here you need to proceed by trial and error. Try starting from 50 pixels and see what happens.

Method two

There is another way to create blurry edges in Photoshop, for many it is preferable and more convenient than the first. In this case, the Quick Mask tool is used, which can be found almost at the very bottom of the vertical panel of the program, on the left side. By the way, there is an alternative way to get into the quick mask mode: press the letter Q on your keyboard.

After that, open the "Filter" section on the toolbar and select the "Blur" line there -. A window will open in which, using the slider, you can adjust the degree of blurring of the edges. Thus, there is an advantage this method above the first: here you do not act on a whim, but clearly see what radius should be set. Click OK.

Now, to see the result of your work, on the keyboard, simultaneously select the ++l keys. Next, delete the selected area using the button. And the last - get rid of the running line, for which you should press + D.

As you can see, the methods are quite simple, but they provide such an effect as blurring the edges in Photoshop.

Good day, dear readers of my blog website. Today we are talking about Photoshop and I will tell you about a few more "tricks" of working with the edges of images in general and layers in particular. Competent work in this direction is the best indicator of professionalism, and therefore I pay great attention to this issue.

In this article, you will learn how to blur the edges in Photoshop to create a cool picture for your blog post and, while this topic is on, I will teach you how to handle layer borders in several new professional ways that I have not mentioned yet.

Working with an image for a website

To be frank, blurring the edges of a picture you're about to insert into an article's text is an outdated style. Now almost no one uses it, but the interest in this issue is very significant, judging by the requests in search engine and the number of articles on this topic.

Therefore, I cannot but show you how to achieve the desired effect, but at the same time I want to suggest the best alternative even in two variations. Suddenly it will be possible to convince someone to abandon the use of an outdated method in favor of a less hackneyed one.

So, to start with the main thing. We open the image.

Now select the Rectangular Selection Tool. If you can't find it, then hold down the mouse button for a couple of seconds on the second button on the panel on the left. There might be an oval area tool here.

By the way, if you use an oval, the photo will become more effective. Rectangular frames have already become obsolete, but ovals are still in the top. Judging by social networks. Well, I'll show you an example later.

So, back to the main topic. While choosing a rectangle.

We draw an area in the picture that will not be blurred. If you want the square to remain uncluttered, hold down Shift while you draw. Press the button and move the mouse over the picture. I need a rectangle, and therefore I will not do this, but you experiment.

After you have done this, the effects will not be applied to the inside of the selected object, but to the outer frame. Go to the filters, the "Blur" section. There are many different possibilities, you can try each one and see how this or that function works. More often than others, experts use "Gaussian Blur ...". Let's try it first, shall we?

Pull the slider and see what changes happen to the photo. Don't forget to check the box to enable Preview.

I like Motion Blur just as much.

The scheme of actions is the same, but the effect is somewhat different.

Ready. But, as promised, I will show you two more interesting effects.

Well, firstly, it's very popular now to write quotes on pictures, and you already know how to do it. It's just not enough to use "Invert". Grab the Rectangular Selection Tool. Choose an area.

Don't use invert, but go straight to Filters and Gaussian Blur. Slightly blur the focus with the tool "Text". It is very important that the image is not too blurry and slightly guessed. Experiment.

Now, as promised, I'll show you how to make the blur around the edges more spectacular. Select the image and under the Rectangular Selection button select the ellipse. Again, to make the shape even, hold down the Shift button, and then choose invert from the "Select" section in the top menu.

Apply the Gaussian Blur filter.

In principle, it's already good. Can be used. To capture crawling ants, simultaneously hold down Ctrl + D or click anywhere in the photo.

You can crop to make the picture square.

That's it, now you know how to blur the edges of a photo beautifully and professionally. Now let's move on to a more interesting and complex issue, namely the blurring of the layer boundaries. Don't worry, everyone can do it!

Professional layering for beginners

To correctly expose the edges of the cut layer will have to try. I can only show the tools, but you will have to configure it yourself. If you want a really cool effect, then at first it may take more than one hour. But let's get started.

We open the image.

Select the magnetic lasso. Its peculiarity lies in the fact that the lasso line, as it were, sticks to the boundaries of the object to be cut. If for some reason the line moves out, it is enough to put an extra point by clicking in the place where the bevel occurs. This will secure the line. And it will move on wherever you need to go.

I had a line moving out in the white areas, and therefore I had to put dots in the area of ​​\u200b\u200bthe face before the magnetic lasso selected the area I didn’t need. Over time, you will get faster, and you will know where the lasso defines the object differently.

Here is the result I got.

In the center of the selected object, click on the right mouse button. Next, select the Refine Edge option to perform additional settings.

First of all, decide on the view to make it easier to adjust. I prefer to work on black, white or layers.

Now you can adjust 4 main parameters: anti-aliasing, feathering, contrast and edge shifting. Unfortunately, there is no single rule for how indicators should look. Much depends on the background, and therefore, if possible, try to immediately work with the image inserted into the required photo.

After setting the settings, save the changes and hold down Ctrl + C (copy) and paste (Ctrl + V) on the keyboard to make a new layer appear. Remove the "eye" icon in the background menu.

Again, you will have to experiment and remove halos and borders until you achieve the desired effect that completely satisfies you.

Ready. There are many ways to work with the background of an image. Watch the video, there's more interesting ways. The only thing I would like to note. The author of the video complicates the work with the size of the brush. Use brackets (“(”,”)”) to increase or decrease the diameter.

Well, in order to roll back actions a step back, it’s better not to go into top panel, and use the keyboard shortcut Ctrl+Z or history. Learn the combinations and the work will go faster.

Now you know all about the edges of the object and the picture. If you are interested in Photoshop, then . The program has a lot hidden features and opportunities. The more you open, the cooler the photos become.

To speed up the learning process, I can recommend the course of Zinaida Lukyanova - “ Photoshop from scratch in video format 3.0 ". You will learn a bunch of tricks and learn all about the tools and functions. This is what distinguishes a professional from a person who just loves to work in Photoshop.

If you are interested in website design, then Netology will soon open a two-month school of web designers, where professionals from the largest corporations in Russia train fully ready-to-work specialists - "Web Designer" . At the end of the training, you will even have to make and defend thesis, which will become part of the future portfolio.

And for starters, while the recording is in progress, you can look at the courses and school of Alexei Zakharenko "School of Web Design" . The first three days you get full access to the service for free.

OK it's all over Now. If you liked this article, subscribe to the newsletter and receive more interesting publications about making money on the Internet directly to your mail. Perhaps very soon you will start from your projects. It's so simple.

Good luck in your endeavors and see you soon.