Laser engraving. Laser engraving of business souvenirs and gifts. Possibility of laser engraving for small runs

Our products are intended for professional and industrial use. Convenient access. . Several reasons make our systems the ideal solution for your recording needs, for example.

• Intuitive software and in Portuguese.
• Reliability.
• Our products are designed and manufactured for industrial applications.
• Ergonomics.
• Various layout options are offered The best decision for your application.

Annealing leaves a tangible mark on stainless steel and other metals. No material is removed during the annealing process, meaning there is no ablation. Instead, the color change occurs by heating the metal. Different colors can be obtained at different temperatures, and annealing is also possible for all alloys containing iron. metal, it is important to heat it rather than spray it, which can be achieved by reducing the laser energy density on the steel. The best way to do this is to focus on increasing the size of the laser dot, making the energy the same over a larger surface area, which will reduce the energy density.

Heating the metal takes time; therefore it is necessary to use slow marking speeds. Engraving leaves a tangible mark on stainless steel and other metals. This results in material being removed from the steel parts. The material evaporates and the color changes. Due to the very high energy of the laser, materials such as steel, titanium and other metals can be directly vaporized. Ablation requires high power and relatively low to moderate marking speed. The lower the frequency, the higher the pulse energy.

This means that the most low frequency must be selected for recording. The brown color left behind from burnt metal can be cleaned off. Polishing leaves a white mark on stainless steel and other metals. This can be considered an "easier" engraving method. Laser energy is reduced which means less evaporation of materials resulting in less ablation on a material such as steel and brighter markings. less power and more high speeds, which causes energy at lower distances and higher frequencies, which causes less pulse energy.

In different colors, letter types and sizes

Polishing is possible not only for steel, but for all metals. New: We now offer laser engraving in a variety of styles, sizes and colors. If you would like to know more, please contact us. The maximum text length is 10 characters. Please note: Engraved badges are shipped with prepayment only.

For "engraved badge" orders, delivery time is 3 to 4 weeks. Controlling a variety of laser sources allows us to meet all identification, tracking, personalization and signage needs with full set standard and custom laser machines.

What is the laser process?

Without contact, laser technology eliminates the hardness of parts and provides a very thin trace of high speed. Flexible, it adapts to all needs and types of production, from aesthetic engraving to very high industrial standards. Economical and environmentally friendly, it does not use solvents, ink or other chemicals for cutting and engraving operations. Easily automated laser processes result in significant reductions in time, energy and materials compared to traditional processes. The work is pure and indelible. . A laser machine is a great tool that improves your productivity, your brand image and is also a source of endless creativity.

By extension: a device that emits very powerful light based on a laser effect

The marking result depends mainly on the wavelength of the selected laser and the interaction time of the beam with the material. The laser offers an unrivaled combination of speed, flexibility and repeatability. This method is ideal for the most demanding industries in terms of quality, time and cost.

Surface thermal marking

When the intensity of the heat emitted by the laser beam causes the material to react without reaching the melting point, the metal changes color at the points of impact. The contrast is created very quickly, without penetrating the material or changing properties. Very resistant to corrosion, this method is especially adapted to the medical and aviation sectors, as well as titanium metals, stainless steel, steel, carbide.

Ablation level marking

Ultra-fast, this method is very suitable for marking signs. By reaching the melting point, this method allows the material to melt and vaporize. Depending on the selected parameters and the power of the laser machine, the tracing will be more or less deep and more or less color.

The marking is direct and permanent, resistant to wear. It is also used to identify high-speed workpieces in automotive and machining applications, ideal for decorative engraving and object personalization. The laser beam cuts the most complex parts into the material. Since the method is non-contact, the workpiece is not subject to stress and is not deformed.

Metals react differently to the same laser beam. The amount of light absorbed by the metal will depend not only on the wavelength used by the laser machine, but also on many other factors. Without contact with laser technology, the hardness of materials is no longer an issue and you get a very thin track at high speed. Flexible, it is suitable for all needs and types of products, from aesthetic engraving to very high industrial cadence. Economical and environmentally friendly, it does not use solvents, inks or other chemical products for cutting and engraving. Easily automated laser processes guarantee important savings in time, energy and materials compared to traditional processes. The work is clean and indelible. . The laser marker is a formidable tool that allows you to increase your productivity, your brand image and stimulate endless creativity.

The selection of the most suitable system goes through the source in relation to the branded material and through the operating mode, which sees three main product families. Laser counter Laser integration Portable laser. . Dot marking is widely used in industrial marking, it is computer technology, used to label and track its products during production or after marketing.

Wide choice between standard marking areas and many available accessories. Tabletop machines. . Marking is the oldest, fastest and most economical method of engraving. The stroke or stroke is easily adjusted and remains constant even by changing the thickness of the workpiece, ensuring the same marking depth on pieces of different heights. All machines are equipped with an anti-vibration device for clear markings and excellent quality data such as logos, texts and numbers.

In addition to marking, these machines are also suitable for riveting, repeating, cyanidation, numbering, stamping, cutting, etc. and in all those operations which require regular and uniform jokes at the most different materials. The big difference between these systems is related to their motion.

Manual machines, pneumatic machines, pneumatic units. . Marking, fast and deep, of metals and alloys on round surfaces. Roll marking can identify, number and graduate cylindrical or tapered parts such as flanges, cylinders, fire extinguishers, gears, discs and any other round surface.

The precise selection of mechanical parts guarantees the long-term efficiency and flexibility needed for high productivity. Two clicked macro photos. Pneumatic presses. . To help you choose, we've divided the models based on our operations. Pneumatic hot air unit Pneumatic hot air unit for integration. Electrolytic marking is suitable for all materials that are good conductors of electricity. Mainly used for marking on stainless steel, steel, aluminum and hard metals.

The marking process occurs by passing a low voltage electrical current from the electrode to the marking element. An engraved matrix is ​​applied to the surface, conducting a special electrolytic liquid. The electrochemical action causes markings on the die on the surface of the workpiece.

The result is a very nice laser contrast marking, although the marking process is completely manual. The cost of laser metal engraving depends on various factors: the time required, the depth of coverage and the complexity of the mathematics involved in the intervention to be implemented. At the preliminary stage, it is very important that the client provides full files quotes regarding the depth and placement of the laser engraving to avoid misunderstandings, lengthen and calculate the quote as accurately as possible.