Master's answer:
For the Caller ID function to work correctly, it is not enough to simply buy a telephone set and order the service at the PBX. You need to be able to correctly connect your phone to the network and configure the appropriate functions in it.
When you bring home the phone you just bought, the first thing you should do is inspect the outlet to which you want to connect the device. If they are the same, that is, made according to the same standard, then nothing extra will need to be done. But if the telephone plug does not fit into the socket, then change one or the other.
If you have an old-style socket, but the plug turns out to be modern, then cut the latter so that the cut piece of wire together with the plug has a total length of 20 centimeters. In the future, you can use it to connect some other phone. Do not connect the two outermost wires in the cord anywhere. With the screws facing the old-style plug and the plastic pin facing down, try connecting the middle wires to the right contacts. Now close the plug and try connecting it to telephone socket. If after carrying out the procedure the phone does not work, then pull out the plug again and now open the socket. Look in it to which contacts the telephone line is connected and move the middle wires of the cord to the same contacts in the plug. Now close the plug, connect the socket back - the device should work.
If, on the contrary, you have a modern socket, but the plug on the device is old, then do the following. Open the plug, disconnect the wires from its terminals, now take a piece of cord with a modern plug at the end. Leave the outer wires of this cord, you don’t need them, but twist the middle ones with the wires coming out of the telephone set. Well insulate the connections and now you can connect the phone.
Some models of telephones with the Caller ID function are supplied with an AC power supply. If you have such a model, then before connecting the telephone cord to the outlet, turn on the phone electrical network. If you have a radio tube, place it on the base. If your phone model runs on batteries, then install them while observing the polarity.
Then it was time to configure the device. First, read the instructions that came with your phone about how to set up a function such as number identification. Choose a method that meets the standards adopted by your PBX. Then set the exact time on your phone, the required ringer volume and the corresponding melody. Set an alarm clock and a melody for it.
Now, to check whether you have configured Caller ID correctly, call yourself to a landline phone with cell phone. When calling, a number must be identified. Please take into account that if you have a domestic standard caller ID, then at the moment when the caller’s number is determined, the phone simulates picking up the handset and funds will be debited from your cell phone account. In this case, only the last seven digits of the number are determined.
Each of us has at least once encountered a situation where we needed to make a call anonymously, and the easiest way for Beeline subscribers is to hide your phone number. This service is called “Anti-Caller Identifier” or “Anti-Caller ID”.
Beeline Caller ID and Anti-ID
Sometimes the “Anti-Caller Identification” service is mistakenly called Caller ID, which is not entirely correct, since Caller ID stands for “Automatic Number Identifier”.
Automatic Caller ID (Caller ID)
Automatic ID allows you to see the caller's number on your phone screen. This service is enabled by default on most SIM cards, however, if it does not work for you, you can enable it manually in one of two ways:
- Send a USSD request: *110*061#.
- Call: 067409061, the answering machine will record your request.
The service is activated and maintained free of charge.
Beeline Anti-Caller Identifier (Anti-AON)
Caller ID will keep your phone number secret when calling.
To connect, dial: *110*071#, or: 067409071.
To disconnect, dial: *110*070#.
To check the service status, dial: *110*09# “call”.
To ensure that when the anti-identifier is turned on, your number will be taken away by the person you are calling, dial: *31#phone_number"challenge" Where “phone_number” is the full number of the called subscriber starting with +7 or 8.
The anti-identifier service is paid, its cost ranges from 3.77 rubles per day to 88 rubles per month, depending on your tariff plan - you can check with the support service for details.
Remember, anti-aon does not guarantee complete anonymity, since you can hide Beeline’s phone number (and any other operator) only for a while - if you wish, your number will be quite easy to find. For example, when sending sms or mms, your number will be displayed to the recipient.
How to determine a hidden Beeline phone number?
There are several ways to determine a Beeline phone number that is hidden:
1) Activate the Super Caller ID service and then you will see the phone number of the subscriber calling you, even if he has AntiAON connected.
To connect, dial: *110*4161# “call”, or 06744161.
To disconnect, dial: *110*4160#, or 06744160 “call”.
The cost of the service ranges from 50 rubles per day to 1,500 rubles per month, depending on your tariff plan; you can check details with the customer service center specialists by calling 0611.
On digital PBXs it will detect only analogue line subscribers, of whom there will soon be no more...
Regarding the answer to the original question: “Russian” (Soviet) Caller ID in Moscow today is alive and well in the dying analog segment (code 495, mainly numbers 3 and 4), but fundamentally cannot issue more than 7 digits. After replacing these automatic telephone exchanges, “Rus” and other devices can be thrown away.
So that the numbers are determined and shown full set numbers with codes, you need to order and pay monthly for the “digital Caller ID” service - 54 rubles. It works great and is absolutely unnoticeable and free for callers; you can forget about Russian Caller ID.
Here is what MGTS writes about this:
Digital Caller ID
Now you can use a modern digital caller ID that works using CLIP FSK technology (you will find out whether your PBX supports this technology by calling the Contact Center of OJSC MGTS at +7 495-636-0-636.
Differences between digital caller ID
— Number identification occurs without establishing a connection. This sets CLIP FSK technology apart from old technology(it is also called “Russian Caller ID”), where the caller ID simulates picking up the phone.
— A ten-digit number will be displayed on the telephone display. You don’t have to call all similar numbers with different prefixes when searching for a subscriber.
— Telephone sets are used without additional modifications or changes to proprietary in-circuit solutions. Consequently, the operation of the device will be stable, as provided by the manufacturer’s warranty.
Note to subscribers. To use the Digital Caller ID service, you need a telephone that supports the CLIP FSK Caller ID function. In most phones produced by well-known manufacturers (such as Panasonic, Siemens, Philips, GE, LG, Palikha, etc.) this function implemented. As a rule, this information is indicated in the documentation for the phone. If you have not saved the documentation, you can clarify the information at the Contact Center of OJSC MGTS.
The numbers of subscribers of other companies (not MGTS), as well as subscribers served by PBX, may not be detected.
What you need to do to use the service
Just call the Contact Center of OJSC MGTS and activate the service!
OJSC MGTS will enable the Digital Caller ID service as quickly as possible and send you an invoice. You need to pay this invoice within the specified time frame. The fact of payment is confirmation of your consent to use the service.
Attention! If the invoice is not paid within the specified period, the service will be automatically deactivated.
Payment procedure. For example, you ordered the service on September 5th. You will receive an invoice, which must be paid within the specified period from the moment of its receipt. Please note that the invoice will show October as the month of payment. This means that for 25 days in September you use the service completely free of charge!
So, you paid for the use of the Digital Caller ID service in October. For using the service in November you will receive in the Unified Account of OJSC MGTS.
What you need to do to refuse to use the service
All you need to do is call the Contact Center at +7 495-636-0-636 and inform the operator about your refusal to use the service.
Price
54 rub. per month
Caller ID "Rostelecom" is a classic option that allows you to see the incoming number without picking up the phone. Thanks to it, subscribers instantly identify calls from interlocutors present in the telephone address book, answer only acquaintances, or set separate ringtones for each person. We'll tell you how much automatic caller ID from Rostelecom costs on a mobile phone and how to activate the service on your home phone.
After connecting the “Automatic Caller ID” option on the subscriber’s screen during incoming call information about the person who initiated the call is displayed. Instead of the inscription “Unknown”, the user sees a phone number and name if the interlocutor is saved in the address book. The data received from the company makes it possible to call back to the specified number and perform other available operations.
Cost of Caller ID service from Rostelecom
Rostelecom does not require you to pay separately for using the Caller ID service. The option is preinstalled on all tariffs mobile communications and in some cases on home phone, and the cost is included in the final amount. Price manual connection and disabling the automatic detector is 0 rubles. Subscription fee There is also no charge for the work.
How to connect caller ID on a Rostelecom home phone
To connect to Rostelecom Caller ID, a stationary device must support Caller ID. Without this function, you will not be able to determine the number of your interlocutor. If specifications The phone meets the requirements, you have 2 ways.
- Call contact center company by calling 8 800 100 08 00. Wait for the operator’s response and express your desire to activate the service. Please note that the work will require the address, name of the holder and contract number - prepare the document in advance.
- Go to your nearest office. To apply, you will need to fill out an application and provide personal information: address and full name to which the phone is registered. Don't forget your passport and contract - they may be required to confirm your identity.
Please note that Caller ID is provided by default on the “Basic” and “Advanced” tariffs. For 530 and 636 rubles per month, respectively, you can get the option along with a set of other communication services.
How to disable Caller ID "Rostelecom"
To remove the automatic detector, use the same methods as when adding a service.
What to do if Caller ID does not work?
When the number is not detected even after connecting the service, the operator advises to proceed in 4 steps.
- Make sure your phone supports Caller ID. Read the instructions for the device in the section “How to set up Caller ID” and step by step check the parameters recommended by the operator.
- Turn off the device and turn it on again. Inspect the cable for damage and the charge level on the free-standing tubes.
- Call home from your mobile phone. If your number is identified, but others are not, the owners of the latter are probably using an anti-identifier. This option is the opposite of Caller ID, which allows you to hide your phone.
- If your number is not identified, call the contact center. Wait for an answer, explain the situation and leave a request to call a specialist.
From the article you will learn the features of using the “Automatic Caller ID” service, as well as the “Super Caller ID” option.
Standard Caller ID service
The standard “Automatic Caller ID” service gives the user the opportunity to recognize the caller’s phone number - it will be displayed on the device screen. Caller ID allows synchronization phone number with a picture and ringtone set for it.
The service provides the ability to easily view missed calls and call the subscriber back, without having to look for his number in the phone book.
Combination of services with tariffs
The Caller ID option is valid on almost all tariff plans. In most cases she included in the package of services provided. If necessary, you can connect it yourself.
Price
The Caller ID service is attached to the line tariff plans MegaFon, and its cost is already included in the package of options provided. You will not need to pay separately to use this feature. 
If, after disabling Caller ID, the subscriber again wants to track who the calls are coming from, the service can be reactivated. In this case, the connection fee will not be charged, and re-use will also not require payment.
Connection
There is no additional need to activate the Caller ID service, since this option is included in the service package of almost all tariffs mobile operator"Megaphone".
Features of the SuperAON service
The standard “Caller ID” may not work if the caller has enabled the “Anti-Caller ID” option. To bypass this restriction, you will need to connect the SuperAON option.
The option is valid even in areas out of reach home network. In addition, you can use the service when traveling outside the Russian Federation.
The option cannot be used if the phone balance is in the red.
The SuperAON service can operate on all modern mobile phones. Only older models can be considered exceptions. Detailed information can be obtained from support service operators by calling 0500.
Connection "SuperAON"
You can activate the service in several ways.
SMS
To activate the SuperAON service, you should send a blank SMS message to the number 5502. After processing it by the operator, the subscriber will be sent another message, which will contain confirmation of the success of the operation.
USSD request
The next way to activate the service is a USSD request. You need to dial *502# and press the call key. After activation, the required amount will be debited from the subscriber, and the option will take effect. The client will receive a notification that the service has been activated.
Disabling "SuperAON"
If you no longer plan to use this service, you can deactivate it to avoid unnecessary charges. To do this, use the following methods:
- USSD command *502*4#. After the processing is completed, the service is disabled, and the user will be notified by SMS.
- SMS message with the text “stop” or “off” to number 5502. After this, you will receive a notification confirming the success of the deactivation.
To deactivate, you can also use the Service Guide application.
Cost of "SuperAON"
The subscription fee is 1,500 rubles per month. The amount will not be written off one time. Funds are charged daily in equal amounts. This allows you to use the option only one day for 50 rubles.
Connecting and disconnecting SuperAON occurs free of charge. There is no limit to the number of times this option can be activated.
Subscriber questions
Is it possible to determine the number when calling from a subscriber of another operator?
The subscriber has the ability to determine the number when making a call received from a user of another cellular operator, but sometimes there are exceptions.
Is it possible to determine hidden number who called before connecting SuperAON?
Determining a hidden number is possible after the SuperAON service is activated.
The Caller ID service is provided to all MegaFon subscribers. But if another user uses the “Anti-AON” option, then to determine his number you will need payable service"SuperAON".
