Replacement by specialists registered on Yuda iPad screen 2 is carried out in the shortest possible time and with the highest quality. The masters have the appropriate education and extensive practical experience, the presence of which is necessarily checked by the administration of the resource during the registration of performers on Yuda.
iPad 2 screen replacement is carried out exclusively using original spare parts, which are purchased directly from manufacturers or their official representatives. This allows our performers to change the display on an iPad 2 cheaper than in a service center.
How do Yudu performers repair a tablet?
Replacing a failed screen on an iPad necessarily includes diagnostics necessary to determine current state gadget. Not only mechanical damage or water ingress, but also malfunctions of functional parts can lead to display failure Apple tablet. For example, the cause of its failure may be a loose cable or a malfunction of the matrix. iPad diagnostics will help identify the real cause of the display failure.
Restoring broken or damaged iPad display 2 performers Yuda is carried out according to the following scheme:
- held computer diagnostics iPad
- The inspection results are analyzed, after which the technician reports the cost and time frame for repairing the iPad.
- a new original display is being installed, including touchscreen and glass
- testing the functioning of iPad 2 after repair work
All parts in iPad 2 are folded as compactly as possible. Therefore, if it breaks down, you should contact specialists who have professional equipment to carry out high-quality repairs.
How long does it take to replace the screen on an iPad 2?
It takes several hours to replace an iPad screen. If you need urgent repairs technicians, warn the technician about this. Then he will perform all the necessary actions in an accelerated manner, spending about 40-50 minutes on it. Despite the efficiency, the cost of restoring the functionality of the iPad 2 remains minimal, and the quality of work will be at the required high level.
Regardless of which part needs to be replaced (display, broken glass or circuit board), iPad repair is carried out with the subsequent issuance of a warranty. It confirms that the iPad repair was carried out with high quality by a specialist.
The advantages of contacting private craftsmen registered on Yuda:
- attractive prices for Apple tablet repair services
- use of original spare parts (controllers, boards, etc.) to restore the functionality of the device
- prompt visit of a specialist to your home to carry out repairs
How much does it cost to replace an iPad 2 display in Moscow?
iPad 2 screen replacement prices include the cost of work performed and spare parts used. This means that you pay only the amount that the specialist told you after the diagnosis. The price also includes a diagnostic examination and warranty service apparatus.
Replacing the iPad 2 screen, performed by Yudu, will allow you to quickly revive the gadget at an inexpensive cost.
Fair, not overpriced and not underestimated. There should be prices on the Service website. Necessarily! without asterisks, clear and detailed, where technically possible - as accurate and concise as possible.
If spare parts are available, up to 85% of complex repairs can be completed in 1-2 days. Modular repairs require much less time. The website shows the approximate duration of any repair.
Warranty and responsibility
A guarantee must be given for any repairs. Everything is described on the website and in the documents. The guarantee is self-confidence and respect for you. A 3-6 month warranty is good and sufficient. It is needed to check quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that they will help you.
Half the success in Apple repair is the quality and reliability of spare parts, so a good service works directly with suppliers, there are always several reliable channels and your own warehouse with proven spare parts for current models, so you don’t have to waste extra time.
Free diagnostics
This is very important and has already become a rule of good manners for the service center. Diagnostics is the most difficult and important part of the repair, but you don't have to pay a penny for it, even if you don't repair the device based on its results.
Service repairs and delivery
Good service We value your time, which is why we offer free shipping. And for the same reason, repairs are carried out only in the workshop of a service center: they can be done correctly and according to technology only in a prepared place.
Convenient schedule
If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient to fit in before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00
The reputation of professionals consists of several points
Company age and experience
Reliable and experienced service has been known for a long time.
If a company has been on the market for many years and has managed to establish itself as an expert, people turn to it, write about it, and recommend it. We know what we are talking about, since 98% of incoming devices in the service center are restored.
Other service centers trust us and refer complex cases to us.
How many masters in areas
If there are always several engineers waiting for you for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of right away.
2. you give to Macbook repair an expert in the field of Mac repairs. He knows all the secrets of these devices
Technical literacy
If you ask a question, a specialist should answer it as accurately as possible.
So that you can imagine what exactly you need.
They will try to solve the problem. In most cases, from the description you can understand what happened and how to fix the problem.
Which mobile devices break down most often? Those that people like to use are constantly in their hands and sometimes fall: Cell phones, smartphones and tablets. In percentage terms, among the tablets on hand, the most Apple iPad different generations. Just a week ago I found out that the official Apple service does not repair devices, but replaces them with new ones at an additional cost. I start with this material new series for repairs mobile devices Apole and more. Therefore, when sending your iPhone or iPad for repair, know that they will replace the broken parts with non-original ones. The quality of the repair will depend not only on the technician, but also on the selected parts and their prices.
How to replace a broken screen in an Apple iPad 2 GSM 64 Gb? Using this example, I’ll tell you and show you how to replace protective glass Apple iPad 2. I will explain how, if necessary, replace the display, repair a broken Home button and a number of other elements. Repairing an Apple iPad 2 is similar to repairing an Apple iPad New; the devices are assembled in the same case. Apple iPad Wi-Fi is easier to repair than the version with GSM and GPS module, due to the lack of additional antennas.
It is advisable to turn off any device before starting repairs, to protect yourself from errors. But this is not always possible to do, for example, the area of the screen where the shutdown slider is located has stopped responding or the Power button has broken. Considered case of iPad repair without turning off the device.
The iPad comes apart from the front. However, like the iPhone 3G and iPhone 5. First, you need to remove the protective glass of the iPad. The frame around the display is heated with a hairdryer to melt the factory glue, the temperature is about 140 degrees. Further to the lower right or right top corner insert a scalpel or a utility knife and slowly peel off the protective glass. When the gap is large enough to insert the second blade, insert it and slide it up or down the long edge. Instead of a scalpel, you can use ordinary plastic picks; working with plastic instruments reduces the likelihood of damaging the device. The task is to walk along the perimeter of the frame and stop in the lower left corner, where there is a capacitive touch glass cable.
Peeling off the glass with a blade should be stopped a centimeter before the volume buttons, so as not to damage the cable. Next you need to peel the glass to the side Home buttons, also stop a centimeter away. When the corner of the protective glass is torn away from the aluminum body, it must be pulled until there is a noticeable tension. The protective glass on the iPad is durable and will not crack even with significant bending. The cables will be visible in the gaps that appear; carefully press them against the body and continue to remove the glass with a scalpel. Go to the lower left corner past the Home button.
Then you return to the top edge, behind the Power button you need to be extremely careful, there is a GSM antenna and its cable. It is necessary to peel off the glass by pressing the antenna against the body. The next antenna is GPS, it is attached more securely than GSM; tear the glass away from it with a bold movement. The left side peels off without any special tricks, and at this point the first and most difficult stage has been completed.
If one of the cables is damaged when removing the protective glass, make repairs more difficult. It will be necessary to splice the halves of the train; or replace the entire module. For example, a GSM antenna and its cable that goes under the display.
Opening the iPad frees the display matrix and controls from captivity. The Home button is removed along with the broken protective glass. Second, you need to remove the iPad display. Unscrew several screws in the corners of the matrix frame. Lift the display, find the cable fastening latch and open it by hooking it with a blade. Remove the cable from the connector and put the iPad display aside. If damaged directly apple display iPad, replace it with a new one and put everything back together.
Third, remove the cable in the same way touch screen iPad. Please note, if you are repairing an iPad that is turned on, after removing the display and capacitive glass cables, you cannot press the Home and Power buttons; the backlight in the device will turn off. By pressing these buttons, the Apple iPad sends a signal to the cables; their absence will give 0 and the tablet will stop working with them. There is nothing wrong with turning off the backlight; the repaired iPad will start working normally after a reboot.
What an iPad looks like under an x-ray does not give the same impression as a live opening of the tablet. Takes up the lion's share of space on the iPad accumulator battery. The batteries are permanently glued and replacement is almost never required. Frequent breakdowns in the iPad are: failure of the Home and Power buttons, and the 30-pion connector. The device is so simple and elegant inside that there is nothing left to break mechanically. The Home button is removed when repairing a broken display; I will not consider it separately. In order to replace the Power button on an iPad, after removing the protective glass, you need to unscrew the two screws on the right side, disconnect the cable and change the button module.
Breakdowns and Apple repair I will not consider an iPad when the tablet is wet, damp, flooded with water or drowned in this material. Most often, for such a tablet repair, you need to remove the metal screens from the motherboard and resolder the chips.
When an Apple iPad 2 or iPad New is dropped, it happens that the aluminum case is dented, most often a corner. It is necessary to evaluate whether the protective glass fits tightly into place. If not, then use a file to grind off the jammed area of the body. After such an operation Apple device looks bitten off like a logo. During the renovation process, the task was slightly changed: how to turn a white iPad into a black iPad. All the color on the iPad is concentrated in the frame around the display. There is also white plastic in the edging of the case, in the 3.5 jack connector and 30-pin connector, but not enough to attract attention.
Pay attention to the upper left corner and the upper edge of the Apple iPad 2 GSM; there is a GSM module and two antennas here. On Wi-Fi iPad versions these elements are missing. The sore spot in the iPad 2 is the cable from the GSM modem to motherboard. This 50-wire cable is mounted on conductive adhesive and comes off when subjected to a strong impact or fall. Its damage is fraught with the following problems: iPad does not see sim card, GSM connection disappears, GPRS session is constantly interrupted, the tablet cannot be found GPS satellites. Replacing a cable is a complex operation; such repairs cannot be performed at home. The repair consists of replacing the cable with 50 soldered thin wires.
Fourth, remove the Home button from the old glass and apply it to the two contacts under the display. The operation of precise positioning of the button relative to the iPad body and the frame so that the part does not move to the side when gluing. Double-sided tape is glued to the edges of the Home button, which lies on the contacts. The new glass is placed in place and the button is glued to it. After this, the glass is removed along with the button.
Reconnect the display and protective glass cables. The display is secured with screws.
Fifth, for repairing iPads and other tablets, they invented and successfully sell 3M double-sided tape. The adhesive tape has rounded edges, the radius of which is exactly the same as the radius of the corners of the iPad. Corners are glued to corners, longitudinal stripes are glued to the edge of the tablet. Two drops of Super Moment Gel glue are added to the lower left corner, where the screen cable runs. Super Moment is needed to protect the loop from breaking; When exposed to direct sunlight, the iPad will heat up and the glass may peel off.
Sixth, remove the film from the second side of the tape and attach the protective glass in place. This completes the iPad repair. Replacing the glass on an iPad takes about two hours of work if you know for sure what is what.
When your iPhone 5 breaks down in St. Petersburg and needs to be repaired, you will be the first to know about it. Evgeniy, an Apple equipment repairman, has cut his teeth on all previous generations of iPhone. Apple technology is simple and repairing the iPhone 5 does not foretell any great difficulties. I hope that the new “Service” section about device repair will find its readers, then I can prepare new reviews and instructions. If you still have questions about repairing and replacing broken glass in iPad 2, then call +7 911 099 13 33 or write comments. We will try to respond promptly to everyone who has encountered an iPhone breakdown or repair. Website of our service and online store Approble.net.
The display module is one of the most unprotected parts of the tablet. Yes, there is glass. Alas, taking into account the considerable weight compared to smartphones, a fall from a small height onto a hard surface is enough and the device will fail. In the best case, you will simply need to replace the iPad display cable, in the worst case, a number of other, more complex and expensive works. Contact the highly qualified professionals working with us, they will restore correct functionality quickly!
Everyone knows why a display module can fail - such as a fall on a hard surface. Since the device is quite heavy, compared to the same smartphones, the likelihood of damage is much higher. Especially with such a large screen area.
Similar consequences in the form of a non-functioning display can be obtained if moisture gets inside the case. In any case, if the picture is not displayed correctly and you cannot fully use the tablet, you should contact one of our workshops for high-quality iPad display repair at a low price.
RemFOX Service Center
The display module is one of the weakest points in modern tablets. Unfortunately, even high-quality equipment assembled at Foxconn factories is subject to the possibility of breakdown for a variety of reasons: mechanical damage, water ingress, natural wear and tear, and manufacturing defects. If you need an iPad screen replacement, we recommend contacting certified specialists working in our service centers"RemFOX"
Don't trust? Please pay attention to the many reviews left by satisfied clients of the workshop. Wondering how much it costs to repair an iPad screen? Call the phone and ask the manager. You can also arrange for a professional to travel to any convenient place: at work, home or in a cafe where you are used to having lunch.
Among other things, we note high confidentiality. Our masters do not distribute other people's information and do not interfere with it. There is absolutely nothing to worry about, be sure to come and we will confirm everything in action!
