Xiaomi mi4 does not see the computer. Xiaomi does not see the computer, reasons, solutions. Why the computer doesn’t see the phone

The most common way to connect a Xiaomi smartphone to a computer is via USB. This function is used to transfer multimedia files, copy photos, and use the gadget as a flash drive. Xiaomi does not see the computer, xiaomi does not sync with the PC. Simply put, Xiaomi does not connect to a computer or laptop.

This can happen after updating your phone or changing xiaomi settings. How to make the PC appear in Xiaomi? The answer to this question is in the article.

Causes of problems

The main reason why the computer does not see the phone is not a problem with the computer, but the settings in the device. Along with this, the second most important are:

“wrong” USB cable (non-original cable or damaged connector or wire);
lack of drivers on the laptop to connect your phone model;
system problems associated with a failure in the laptop or Xiaomi;
incorrect choice of connection method (Xiaomi charges via USB, but cannot connect).

The Android application plays an important role here if the user has made an update. In new versions, Xiaomi does not see the computer due to data protection installed by the developers. But first things first. Let's move on to problem solving: what to do if the problem is a faulty cable.

The problem of connecting a gadget to a laptop is solved in the same way as on a personal computer.

Checking the usb cable

First, let’s determine whether the USB cable itself is working properly and whether there is any external damage on it. It happens that the connection connector to Xiaomi becomes clogged. In this case, you should carefully and carefully clean it with a needle, being careful not to damage the cables.

Another reason may be a defective cable that can only charge the device, but is not suitable for transferring files. In this case, there is only one way out: buy an original USB.

If the problem cannot be solved and the computer does not see Xiaomi, check that the PC connectors are working properly, just in case. You can select any other USB connector on the back or front panel of the computer. Sometimes a malfunction of the motherboard's south bridge can render all USB ports inoperable. There is only one way out - to repair or replace the computer motherboard.

The fourth reason why xiaomi does not see the computer may be a malfunction of the connector on the android. When water gets in or the smartphone falls, the gadget stops responding to connecting devices, and “glitches” begin.

In any case, you can try rebooting XIaomi. It also helps, according to user reviews, if you remove the battery from Xiaomi for a few minutes and hold it in your hands.

If you connect the gadget to the computer, and the “charging” mode is displayed on the display screen, you can transfer data between the laptop and Xiaomi. This is not due to a faulty cord, but to the smartphone settings.

So, when connecting Xiaomi to a computer, the following modes are possible:

charger,
MTP data transfer,
camera mode.

If the computer does not see the Xiaomi phone via USB, but is charging, you need to go to the Xiaomi settings menu and in the window that appears, check the box next to the desired function: for example, MTP transfer.

Download drivers

When we connect Xiaomi to a computer, automatic processes are launched. During normal operation of PC programs, the following autorun menu appears:

Autostart of a Xiaomi smartphone does not work in some cases. In this case, the gadget will not appear on the laptop. To manually install drivers on the laptop, you will need to download 2 files. One of them presents a program for Media Tek, the second Qualcomm. However, you can delve into the drivers for MIUI yourself, since the choice on the Internet is wide, and determine which one is best suited for your Xiaomi.

Important! When installing files on Windows 8 and 10, you will need to disable driver digital signature verification and restart the computer.

To automatically install drivers via the Internet, you need to run the command:

Start - Control Panel - System and Security - System - Device Manager - Portable Devices. The following window should appear, in which we click on the icon of your smartphone. To identify problems, why the computer does not see Xiaomi, you will need to click on the context menu and select the Properties tab. Then check if the device is working properly. If not, then deleting the connection and then reinstalling it may help.

If the problem persists and Xiaomi does not see the computer, you should download drivers via the Internet. Of the two items in the Properties tab, you will need to select automatic search for drivers for the device. If you choose manual installation, you will need to specify the path to the folder where the downloaded files are located. In our case, Media Tek and Qualcom. They are usually located in the Downloads folder. Special applications will help you establish a connection between Xiaomi and your PC. One of them: the MiPCSuite program. You can download it from the official website of the developer. By installing the program, the user gets the opportunity to synchronize the PC with Xiaomi: and use the function of transferring photos and files.

Enable debugging mode

Sometimes the gadget refuses to interact with the PC due to the fault of the developers of new versions of Xiaomi, 5A, 4x, etc. In this case, the root of the problem why Xiaomi does not see the computer lies in the firmware settings. If Xiaomi does not see the computer after the update, but before that everything worked, to solve the problem of connecting a smartphone, you should delve into the phone’s settings and enable access to advanced connection settings.

In the “About Phone” tab, select “Developer Mode” by clicking on the MIUI menu about 7 times, after the entry “You are already a developer” appears, click on the “Developer Settings” menu, and in the window that appears, select “USB Debugging”. After enabling debugging and the results are positive, you can safely use your Xiaomi phone as a storage device.

Connect via terminal

To solve the problem of connecting your Xiaomi phone to a PC, you can use the terminal program by installing the program from Google Play. It's called Terminal Android Emulator.

After installation, connect your smartphone to your computer. Having opened the Terminal program, enter the word su in the line and press Enter. This enables super user mode. Afterwards, already in root access mode, in the same window, enter a new line: setprop persist.sys.usb.config mass_storage,adb and click Enter. To apply the changes, you must reboot the program by entering the reboot command. This method is suitable if you plan to launch your smartphone in flash drive mode. To synchronize Xiaomi with a PC in media file transfer mode, in the longest command, replace the word mass_storage with mtp, which is short for multimedia. If the computer does not see files on Xiaomi, but is displayed in camera mode? Read more about this.

In camera mode

If Xiaomi is connected only in camera mode, then for those who are afraid of “spoiling” Xiaomi, you can use the simplest method. Move files from laptop or PC to DCIM folder. And then from there, using the file manager, move it to the desired location on the phone. But it is much better to use the method described above.

Results

Basically, problems with connecting Xiaomi to a computer are not that big and can be easily fixed. If none of the above methods work, and the Xiaomi smartphone does not see the computer, there are two options left:

reset all settings to factory settings. When using this function, it is important to remember that a reset will delete all user data: contacts, mail, etc.
change the firmware.

In the latter case, it is important to figure out which one is best suited for a smartphone. Currently there are two most popular firmware versions:

Stable firmware
Global firmware 9.

As more and more new devices appear on the smartphone market, users have a wider choice, which is determined by their need for something new and unknown. As a “bonus”, various bugs and malfunctions in the operation of devices stick to us. And there is one problem that worries users quite often - in this article we will try to figure out how to properly connect any of the smartphones - Xiaomi Redmi 4x, Xiaomi Redmi 4 Pro or Redmi 4 Prime to a PC.

From this article you will learn about all the main reasons for the problem of connecting Xiaomi to a laptop or personal computer and learn about all the available ways to resolve them - you just have to read the material below very carefully, determine the cause and method of solving the problem and fix it as quickly and efficiently as possible . We warn you: most likely, you will have to use additional software, and possibly reset the gadget to factory settings.

Surely each of you has heard the saying “if you don’t know the ford, don’t go into the water.” But many of us violated this rule by purchasing new Chinese smartphones, the functionality of which is not particularly clear to a Russian person. Therefore, today we have to thoroughly analyze each of the problems prepared for us by manufacturers from China. The most likely causes of problems connecting your smartphone to your computer may be:

Non-original USB cable;
Incorrect connection method to PC;
Lack of necessary device drivers;
Device system errors and much more.

Of course, this is not a complete list of all possible reasons - in life there may be several dozen times more. However, these are the main ones. Next, we will describe in detail every method known to us to resolve this problem and not only tell you how to connect your phone to a PC, but also tell you how to make this process as simple as possible. These tips will help even if your laptop cannot see the phone connected to it.

Give gifts

What to do if your phone doesn't connect

Download original device drivers

In order for a device connected to a computer to begin to function correctly, several different processes begin to work in both devices at once. Often the process of launching them is automated, but if you are reading this article, then most likely this is not the case in your case. It turns out that the computer cannot automatically find the required driver and install it on its own, and, as a result, synchronization does not occur and your Xiaomi does not connect to the PC. If you are using an original USB cable to connect two devices, then we can rule out that this is the problem. Also try different USB ports on the computer - both front and back, since it is quite possible that the connector itself does not work.

Did not help? This means, as originally planned, download the driver, install and check the result by reconnecting the phone to the PC or laptop.

If the connection is in camera format

After we have looked at the two most commonly used ways to fix the error, let's look at the third - although it is simple, it is unusual. It happens that the smartphone is connected to the PC in camera mode, where the photos you previously took on the phone are displayed. In this case, try transferring the files you need from your PC to the photo folder, and then from there through the file manager to specific destination folders. But this method is suitable for those who do not want to bother and look for the true root of the problem.

Driver installation program

By the way, if we return to the same problem of lack of drivers, we would like to recommend you a program - with its help you will forever get rid of the question of why they are not there. Download, unpack and install it, then connect your smartphone to your PC. Right click on "My computer", go to "Task Manager", find the phone and USB cable that were not recognized by the computer, click on it and select Driver – Update. Then provide the path C:\Users\ComputerName\AppData\Local\MiPhoneManager\main\Driver and click on "Further". Done, problem solved!

conclusions

Often, the problem of connecting a smartphone to a laptop or computer lies in some small details - a non-original USB cable, lack of drivers for Redmi, and so on. In 90% of cases, the simple methods we described in the first part of this article will help you synchronize your phone with your computer forever - you just had to be more careful from the very beginning. Choose the option that suits you and connect without any problems. But if you are unlucky and find yourself in the remaining 10%, the second part of the article, which describes methods repeatedly tested in practice, will help solve the problem.

It also happens that this article does not help, and if none of the methods worked for you, then this means that the roots of the problem lie much deeper than you think - most likely, you will have to reflash your device using Fastboot mode, but this We will devote a separate article to this topic.

We really hope that articles like this will not be useful to you in reality, but if suddenly problems arise in connecting devices, you already know what and how to do.

At a time when users of various gadgets have more and more options to choose from, the number of problems, accordingly, increases in direct proportion. Today we will try to understand this issue - how to identify the main reasons why the computer does not see the phone. The fact is that users are often bothered by this problem, but the reasons for its occurrence may be different. To solve it, you may need third-party software or even a factory reset. So we advise you to first read this article to the end, and only after that decide what to do if the computer does not see Xiaomi.

Below is the main list of reasons why your MIUI smartphone does not connect to the computer:

Drivers are not installed on the computer.
Non-original USB cable.
The phone was not connected correctly.
System problems or other reasons.

Of course, this is not a complete list of reasons, since they can be very diverse, and it will be difficult to fit them into one article.

Give gifts

How to fix connection problems

Download drivers

When you connect your Xiaomi Redmi or Mi to your PC, several processes run simultaneously, and they do not always work as they should. If, for example, your computer is not able to automatically find and install drivers for your smartphone, then the gadget on MIUI will not function normally. To begin with, it is important to know that you should only connect via an original USB cable (not a fake). If so, then the problem is not with him. After this, try connecting your Xiaomi phone to other USB ports (note that there are also such connectors on the back of the system unit).

To install drivers, just download, unzip and install the following 2 archives: and . If you have Windows 8 or higher, before doing this you need to disable driver digital signature verification and restart your PC. A little later we will describe another way to install the driver.

Enable Debug Mode

Installing drivers for MIUI is as easy as shelling pears, but it also happens that this method did not help solve the problem. In the second option, everything is also done very simply. To implement it, go to your smartphone in Settings – Advanced – For Developers – USB Debugging and enable this feature.

It often happens that when the smartphone is connected to the PC, the user sees a menu on the monitor that provides the opportunity to select the type of connection. We need an MTP connection, which involves connecting a computer to a smartphone as a multimedia device. In addition, you can enter this combination in the phone dialing menu: *#*#13491#*#* , which brings up the same menu. The menu itself looks almost the same on all devices, be it Xiaomi Redmi Note 3, Redmi 3 Pro or Xiaomi Redmi Note 2.

What to do if your phone is connected in camera mode

In addition to the two above, there is also a third option, which we have highlighted separately due to its non-standard nature. If your Mi connects to the PC only as a camera, and not as a drive, then you can try transferring the files you need to the “Photos” folder on the phone, and then using the file manager to distribute them into sections. But this method is suitable for the lazy - if there is no desire to delve into the problem and make any efforts to solve it.

Also, pirated software installed on the phone or the “wrong” MIUI firmware may be an obstacle, but we won’t go into that now. We would like to offer you several more complex options if the PC still does not see any devices connected to it.

More complex methods

If simple ways to solve the problem did not help you, and your PC still does not see your smartphone, we suggest you use a couple of new tips.

Via terminal. To do this, go to Play Market and download the application Android Terminal E. Install it, then connect your smartphone to your computer, thereby accessing the device in USB storage mode. After that, write “su” in the application (this will enable super-user rights) and confirm your choice. Then enter another command: setprop persist.sys.usb.config mass_storage,adb and press the Enter button. At the end we write Reboot, thereby rebooting the smartphone.
Some users who want to log into the phone via MTP connect in the same way, changing only one phrase in the last command, replacing "mass_storage" on "mtp".

If you remember smartphones such as Xiaomi Mi Max or Redmi Note 3 Pro, then such problems did not arise with them, which is why it is unusual that they appeared with the third Redmi smartphones. The Note 2 didn't have these problems either. But oh well, these are already problems for the developers, and we must solve the connection problem.

How to return connection settings

If for some reason your connection settings have disappeared and you want to restore access to them, no problem. There is a program for this called (it is not in the play market - download from this link). After downloading and installing the program, run it. There will be several fields here, in the second field (Package) select item com.android.settings, in field Class – com.android.settings.UsbSettings. Click on the button Create Shortcut and enjoy the result.

Now you get full access to all connection settings. By the way, if you go back to the same drivers, we also recommend installing the program - with it you will forever solve the issue of their absence. Connect a smartphone with the program already installed, right-click on the “My Computer” window and go to Task Manager. There, find unidentified devices - smartphone and cable - and then click on "Update" In chapter "Driver" and specify the path in the MiPhone Manager folder to main/Driver. Click "Further" and update the drivers on the cable and smartphone tabs. We hope this method helped you, and the computer will tell you “I see a new device.”

Bottom line

Most often, problems with connecting any smartphone, for example, Redmi Note 3 Pro to a PC, are hidden in small things, and they are not at all difficult to solve. If the reason lies in the phone itself, then now you have several reliable methods in your arsenal to solve this issue.

And if you have a special case, and none of the methods suggested above helped, then most likely the roots of the problem lie much deeper than you think. You may have to reflash the phone, but that's a completely different story.

Many Xiaomi Redmi Note 4 users are faced with the problem that the computer does not see the smartphone. How to properly connect Xiaomi Redmi Note 4 to a PC or laptop via a USB cable in order to transfer data from a smartphone to a computer or vice versa? You may also need to connect your phone to a computer to distribute the Internet, flash your smartphone, and much more.

Please note: we are talking about the Xiaomi Redmi Note 4 smartphone, but the problem that the computer does not see the phone can occur on any Xiaomi device. You can use our tips for all smartphones from the Chinese manufacturer Xiaomi.

In fact, the problem with Xiaomi Redmi Note 4 not seeing the computer is the licensing of data transfer from the phone to the PC or, more specifically, the USB debugging, which is found in the developer options on the smartphone. Also make sure that you are using an original USB cable from Xiaomi or at least from another reliable manufacturer.

Step 1: Activate Developer Mode

As we have already found out, to solve the problem of Xiaomi Redmi Note 4 not seeing the computer, you need to enable USB debugging. However, to enable USB debugging, you must activate developer mode.

Step 2: Enable USB Debugging

Once you have activated developer mode, a new menu will appear in your smartphone settings.

Now you can connect your smartphone to your computer via USB and check whether it sees your mobile device or not.

The computer still does not see Xiaomi Redmi Note 4

If the problem has not been resolved, then you should install the program Xiaomi PC Suite) to your computer. You can also try installing the application

Connecting Xiaomi Redmi 4X to a computer can significantly simplify working with the gadget and expand its functionality. Connect helps to carry out a number of manipulations, including:

data transfer (music, photos, documents);
using a smartphone as a storage device;
updating the firmware or installing custom assemblies;
debugging, obtaining Root and system changes.

Often the connection occurs without any problems, but there are times when the computer does not recognize the device. We will look at popular methods of connecting the device to a PC, and also analyze problems that may arise and options for solving them.

How to connect to a computer?

Almost always the connection should be made via a USB cable. This method will provide full access to the file system and the ability to modify the firmware.

Windows XP and newer builds are programmed to automatically select drivers for Xiaomi MI4 and other models, so you most likely won't even have to do anything.

The only thing you need to do is follow these simple steps.

Connect the cord to the Xiaomi Redmi Note 4 socket, and insert the other end into the USB connector on the PC.
In the pop-up window on your computer desktop, select what you want to do with the connected device.

This is all that is required by the vast majority of users, but sometimes problems arise during the process or when connected, only charging occurs, but files cannot be transferred. This usually happens on devices that do not have global firmware, so they run localized builds of MIUI or custom Android-based systems.

Problems connecting your phone to a computer and their solutions

Let's figure out what to do if the PC does not see the Xiaomi smartphone. It is rarely possible to immediately identify the problem, since there are dozens of options. Separate solutions to failures that are relevant, for example, for MI5S, will not give results if you do the same for another device. Therefore, only those who have a good understanding of their phone will be able to understand the problem. However, we will highlight the most common ones that are found on all gadgets.

Problem 1: Non-original cable

There is a small chance that attempting to connect via a non-genuine USB will result in your Redmi 4A not being detected by Windows.

Solution. Make sure that the cable is original. If not, then try to find exactly the same one in an online store, from retailers in your city, or order from China.

Problem 2: Drivers

The absence of a set of drivers in Windows for one reason or another will make it impossible to connect a smartphone to a computer.

Solution. You need to find out whether your operating system supports automatic loading of drivers, check their availability and version, check when they were updated and whether they were updated at all. It is important to monitor Windows system notifications after connecting the cable to your computer and smartphone. She usually reports that the process of selecting drivers is underway, and at the end she says whether they were installed successfully or not.

If the installation was unsuccessful, you can download them manually. Almost all Xiaomi phones (such as the Redmi Note 4X or the flagship MI6) have threads on the forums where you can download the latest drivers. After they are downloaded, you need to do the following:

unpack them (if it is an encrypted archive);
install it in a separate folder;
insert the cord into the phone and PC, click “My Computer” with the right mouse button, go to the “Device Manager” tab, the new connected device, which is the phone, will be displayed there;
right-click on it and select “Driver”, now “Update”, then indicate the folder in which the drivers were installed.

The instructions help, but remember that gadgets are unique, and approaches to MI A1 may differ from those that are relevant for the same Xiaomi Redmi 3 Pro. If it doesn’t work, go to the topic of your device on the forums, read the instructions and tips. There is almost a 100% chance that there will be a hint there.

Reason 3: Incorrect connection method

Usually this doesn't happen, but there are all sorts of cases.

Solution. Make sure once again that the cable is firmly in the socket and that the USB port on the PC is working.

Reason 4. Errors in the firmware

Crashes occur in custom and sometimes official firmware. It is difficult to solve such a problem; it is often done using a radical method.

Solution. You need to reset to factory settings or change the firmware if the first option did not help.

This should be done as a last resort, when you have already tried everything that is written in the article, and have also studied the topic on the forums. Flashing Xiaomi MI5 and Xiaomi Redmi 3S will be different, so look for separate detailed instructions. Remember that you must make a backup.

A better option would be to ask knowledgeable people or take your Xiaomi Mi Max or Xiaomi Redmi Note 3 or other smartphone to a service center. After all, there is no 100% guarantee that flashing the firmware will help fix everything, and an inexperienced user can do such things that problems with connecting to a PC seem like a trifle.

Xiaomi mi4 does not see the computer. Xiaomi does not see the computer, reasons, solutions. Why the computer doesn’t see the phone - connecting Xiaomi Redmi via USB

Causes of problems

Checking the usb cable

Download drivers

Enable debugging mode

Connect via terminal

In camera mode

Results

What to do if your phone doesn't connect

Download original device drivers

If the connection is in camera format

Other ways to solve the problem

Using the terminal

Restoring connection settings

Driver installation program

conclusions

How to fix connection problems

Download drivers

Enable Debug Mode

What to do if your phone is connected in camera mode

More complex methods

How to return connection settings

Bottom line

Step 1: Activate Developer Mode

Step 2: Enable USB Debugging

The computer still does not see Xiaomi Redmi Note 4

How to connect to a computer?

Problems connecting your phone to a computer and their solutions

Problem 1: Non-original cable

Problem 2: Drivers

Reason 3: Incorrect connection method

Reason 4. Errors in the firmware

Other ways to solve problems

Connection in active camera mode

Activating USB Debugging

Using the terminal